References
- Shasikant, V., Roy, A.K., "Kaushikkumar, Effect and Optimization of Machine Process Parameters on MRR for EN19 and EN41 Materials using Taguchi Method," Procedia Technology, Vol. 14, pp. 204-210, 2014. https://doi.org/10.1016/j.protcy.2014.08.027
- Roy, A.K., Kaushik Kumar, "Effect and Optimization of various Machine Process Parameters on the Surface Roughness in EDM for an EN41 Material using Grey Taguchi," Procedia Materials Science, Vol. 6, pp. 383-390, 2014. https://doi.org/10.1016/j.mspro.2014.07.049
- Jahan, M.P., Yang, Y.S., Rahman, M., "A Study on the Fine-finish De-sinking micro-EDM of Tungsten carbide using Different Electrode Materials, "Journal of Materials Processing and Technology," Vol. 209, pp. 3956-3957, 2009. https://doi.org/10.1016/j.jmatprotec.2008.09.015
- Kuppan, P., Rajadurai, A., Narayanan, S., "Influence of EDM Process Parameters in Deep Hole Drilling of Inconel 718," International of Journal of Advanced Manufacturing Technology, Vol. 38, pp. 74-84, 2008. https://doi.org/10.1007/s00170-007-1084-y
- Singh, S.K., Kumar, N., "Optimizing the EDM Parameters to Improve the Surface Roughness of Titanium Alloy(Ti-6AL-4V), International Journal of Emerging Science and Engineering," Vol. 1, pp. 2319-6378, 2013.
- Meetham, G.W., "High Temperature Materials-a General Review," J. Mater. Sci. Vol. 26, pp. 853-860, 1991. https://doi.org/10.1007/BF00576759
- Fitzer, E. "Future of Carbon-Carbon Composites," Carbon Vol. 25(2), pp. 163-190, 1987. https://doi.org/10.1016/0008-6223(87)90116-3
- Manocha, L.M., Bahl, O.P., Singh, Y.K., "Fiber Matrix Interface in Carbon-Carbon Composite-Effect of Surface Morphology of Carbon Fibers," Carbon Vol. 27(3), pp. 381-387, 1989. https://doi.org/10.1016/0008-6223(89)90070-5
- Koening, W., Komanduri, R., Tokanshoff, H.K., "Machining of Hard Metals," Ann. CIRP, Vol. 33(2), pp. 417-427. 1984. https://doi.org/10.1016/S0007-8506(16)30003-8
- Lau, W.S., Wang, M., Lee, W.B., "Electrical Discharge Machining of Carbon Fiber Composite Materials," Int. J. Mach. Tools Manuf. Vol. 30(2), pp 297-308, 1990. https://doi.org/10.1016/0890-6955(90)90138-9
- Hocheng, H., Guu, Y.H., Tai, N.H., "The Feasibility Analysis of Electrical Discharge Machining of Carbon-Carbon Composites, "Mater. Manuf. Process. Vol. 13(1), pp. 117-132, 1998. https://doi.org/10.1080/10426919808935223
- Koenig, W., Dauw, D.F., Levy, G., Panten, U., "EDM - Future Steps towards the Machining of Ceramics", Ann. CIRP Vol. 37, No. 2, pp. 625-631, 1998.
- M.S. Phadke, "Quality Engineering using Robust Design, "Prentice-Hall, Englewood Cliffs, NJ, 1989.
- Yang, W.H., Tarng, Y.S., "Design Optimization of Cutting Parameters for Turning Operations based on the Taguchi Method, J. Mater. Process". Technol. Vol. 84, pp. 122-129, 1998.
- D.C. Montgomery, "Design and Analysis of Experiments, "Wiley, New York, 2001.
- Y.S. Tarang, W.H. Yang, "Application of the Taguchi Method to the Optimization of the Submerged Arc Welding Process, "Mater. Manuf. Process. Vol. 13(3), pp. 455-467, 1998. https://doi.org/10.1080/10426919808935262
- D.R. Cox, N. Reid, "The Theory of the Design of Experiments, "Chapman & Hall/CRC Press, London/Boca Raton, FL, 2000.