임피던스 변화를 이용한 선형 대기압 DBD 플라즈마 밀도 측정

Plasma Density Measurement of Linear Atmospheric Pressure DBD Source Using Impedance Variation Method

  • 신기원 (광운대학교 전자바이오물리학과) ;
  • 이환희 (광운대학교 전자바이오물리학과) ;
  • 권희태 (광운대학교 전자바이오물리학과) ;
  • 김우재 (광운대학교 전자바이오물리학과) ;
  • 서영철 (영신알에프(주)) ;
  • 권기청 (광운대학교 전자바이오물리학과)
  • Shin, Gi Won (Kwangwoon University Dept. of Electrical and Biological Physics) ;
  • Lee, Hwan Hee (Kwangwoon University Dept. of Electrical and Biological Physics) ;
  • Kwon, Hee Tae (Kwangwoon University Dept. of Electrical and Biological Physics) ;
  • Kim, Woo Jae (Kwangwoon University Dept. of Electrical and Biological Physics) ;
  • Seo, Young Chul (YOUNGSIN-RF CO.,Ltd.) ;
  • Kwon, Gi-Chung (Kwangwoon University Dept. of Electrical and Biological Physics)
  • 투고 : 2018.05.28
  • 심사 : 2018.06.20
  • 발행 : 2018.06.30

초록

The development speed of semiconductor and display device manufacturing technology is growing faster than the development speed of process equipment. So, there is a growing need for process diagnostic technology that can measure process conditions in real time and directly. In this study, a plasma diagnosis was carried out using impedance variation due to the plasma discharge. Variation of the measurement impedance appears as a voltage change at the reference impedance, and the plasma density is calculated using this. The above experiment was conducted by integrating the plasma diagnosis system and the linear atmospheric pressure DBD plasma source. It was confirmed that plasma density varies depending on various parameters (gas flow rate, $Ar/O_2$ mixture ratio, Input power).

키워드

참고문헌

  1. "Technology Roadmap for SME 2017-2019." Small and Medium Business Administration, (2016).
  2. Woo suk Kang, Min Heo, "Surface treatment using atmospheric pressure plasma." Journal of the KSME, Vol. 55, No. 6, pp. 42-44.
  3. Yokoyama, T., et al. "The improvement of the atmospheric-pressure glow plasma method and the deposition of organic films." Journal of Physics D: Applied Physics 23.3 (1990): 374. https://doi.org/10.1088/0022-3727/23/3/021
  4. Machala, Z., et al. "Emission spectroscopy of atmospheric pressure plasmas for bio-medical and environmental applications." Journal of Molecular Spectroscopy 243.2 (2007): 194-201. https://doi.org/10.1016/j.jms.2007.03.001
  5. Forster, S., C. Mohr, and W. Viol. "Investigations of an atmospheric pressure plasma jet by optical emission spectroscopy." Surface and Coatings Technology 200.1-4 (2005): 827-830. https://doi.org/10.1016/j.surfcoat.2005.02.217
  6. Sornsakdanuphap, Jirapong, et al. "Electron temperature and density of non-thermal atmospheric pressure argon plasma jet by convective wave packet model." Journal of the Korean Physical Society 70.11 (2017): 979-989. https://doi.org/10.3938/jkps.70.979
  7. Xu, Kunning G., and Steven J. Doyle. "Measurement of atmospheric pressure microplasma jet with Langmuir probes." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 34.5 (2016): 051301. https://doi.org/10.1116/1.4959565
  8. Elbuken, Caglar, et al. "Detection of microdroplet size and speed using capacitive sensors." Sensors and Actuators A: Physical 171.2 (2011): 55-62. https://doi.org/10.1016/j.sna.2011.07.007
  9. Humud, Hammad R., Qusay A. Abbas, and Aws F. Rauuf. "Effect of Gas Flow Rate on The Electron Temperature, Electron Density and Gas temperature for Atmospheric Microwave Plasma Jet."
  10. Takechi, K., and M. A. Lieberman. "Effect of Ar addition to an $O_2$ plasma in an inductively coupled, traveling wave driven, large area plasma source: $O_2/Ar$ mixture plasma modeling and photoresist etching." Journal of Applied Physics 90.7 (2001): 3205-3211. https://doi.org/10.1063/1.1398600