References
- Balci, C., Bilgin, N. (2007), "Correlative study of linear small and full-scale rock cutting tests to select mechanized excavation machines", International Journal of Rock Mechanics & Mining Sciences, Vol. 44, No. 3, pp. 468-476. https://doi.org/10.1016/j.ijrmms.2006.09.001
- Bilgin, N., Demircin, M.A., Copur, H., Balci, C., Tuncdemir, H., Akcin, N. (2006), "Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results", International Journal of Rock Mechanics & Mining Sciences, Vol. 4, No. 1, pp. 139-156.
- Bilgin, N., Copur, H., Balci, C. (2013), Mechanical Excavation in Mining and Civil Industries, CRC press, London, pp. 89.
- Chang, S.H., Choi, S.W., Bae, G.J., Jeon, S. (2006), "Performance prediction of TBM disc cutting on granitic rock by the linear cutting test", Tunnelling and Underground Space Technology, Vol. 21, No. 3, pp. 271. https://doi.org/10.1016/j.tust.2005.12.131
- Chang, S.H., Choi, S.W., Park, Y.T., Lee, G.P., Bae, G.J. (2012), "Characterization of the deformation of a disc cutter in linear rock cutting test", Journal of Korean Tunnelling and Underground Space Association, Vol. 14, No. 3, pp. 197-213. https://doi.org/10.9711/KTAJ.2012.14.3.197
- Cho, J.W. (2010), Linear cutting test and numerical study on the assessment of rock cuttability of a TBM disc cutter, Ph.D. Thesis, Seoul National University, pp. 69-70.
- Choi, S.W., Chang, S.H., Park, Y.T., Lee, G.P. (2014a), "Performance estimation of conical picks with slim design by the linear cutting test (I): depending on attack angle variation", Journal of Korean Tunnelling and Underground Space Association, Vol. 16, No. 6, pp. 573-584. https://doi.org/10.9711/KTAJ.2014.16.6.573
- Choi, S.W., Chang, S.H., Lee G.P., Park, Y.T. (2014b), "Performance estimation of conical picks with slim design by the linear cutting test (II): depending on skew angle variation", Journal of Korean Tunnelling and Underground Space Association, Vol. 16, No. 6, pp. 585-597. https://doi.org/10.9711/KTAJ.2014.16.6.585
- Choi, S.W., Kang, T.H., Chang, S.H., Lee, C.H., Lee, G.P., Kim, C.Y. (2016), "Performance estimation depending on the insert size of conical picks by linear cutting test", Journal of Korean Tunnelling and Underground Space Association, Vol. 18, No. 2, pp. 221-233. https://doi.org/10.9711/KTAJ.2016.18.2.221
- Choi, S.W., Chang, S.H., Lee, C.H., Lee, G.P., Bae, Y.H., Ha, T.W. (2015), "Performance evaluation of conical picks for roadheader in copper mines", Tunnel and Underground Space, Vol. 25, No. 6, pp. 496-504. https://doi.org/10.7474/TUS.2015.25.6.496
- Copur, H., Balci, C., Tumac, D., Bilgin, N. (2011), "Field and laboratory studies on natural stones leading to empirical performance prediction of chain saw machines", International Journal of Rock Mechanics & Mining Sciences, Vol. 48, No. 2, pp. 269-282. https://doi.org/10.1016/j.ijrmms.2010.11.011
- Evans, I. (1984), "A theory of the cutting force for point attack picks", International Journal of Mining Engineering, Vol. 2, No.1, pp. 63-71. https://doi.org/10.1007/BF00880858
- Goktan, R.M. (1990), "Effect of cutter pick rake angle on the failure pattern of high strength rocks", Mineral Science and Technology, Vol. 11, No. 3, pp. 281-285. https://doi.org/10.1016/0167-9031(90)90981-W
- Jeong, H.Y., Lee, S.D., Jeon, S.W. (2014), "Current and future study on assessment of cutting performance of hard rock TBM in Korea", The 14th World Conference of the Associated research Centers for the Urban Underground Space, Seoul.
- Jeong, H.Y., Jeon, S.W. (2016), "Numerical study for estimation of cutting performance of pick cutter", 2016 Korea-Japan Joint Symposium on Rock engineering, Daejeon.
- Jeong, H.Y., Cho, J.W., Jeon, S.W., Rostami, J. (2016), "Performance assessment of hard rock TBM and rock boreability using punch penetration test, Rock Mechanics and Rock Engineering, Vol. 49, No. 4, pp. 1517-1532. https://doi.org/10.1007/s00603-015-0834-7
- Jeong, H.Y., Jeon, S.W. (2017), "Characteristic of size distribution of rock chip produced by rock cutting with a pick cutter", International Conference of Tunnels and Underground Spaces, Ilsan.
- Kang, H., Jang, J.S., Park, J.Y., Cho, J.W., Jung, M.S., Lee., J.W. (2016), "Method for measuring 3-axis cutting force of a pick cutter using the single-axis load cell array", Journal of the Korean Society of Marine Engineering, Vol. 40, No. 9, pp. 749-755. https://doi.org/10.5916/jkosme.2016.40.9.749
- Kim, T.H., Jeon, S.W. (2016), "A study on shear characteristics of a rock discontinuity under various thermal, hydraulic and mechanical conditions", Tunnel and Underground Space, Vol. 26, No. 2, pp. 68-86. https://doi.org/10.7474/TUS.2016.26.2.068
- Nishimatsu, Y. (1972), "The mechanics of the rock cutting", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 9, No. 2, pp. 261-271. https://doi.org/10.1016/0148-9062(72)90027-7
- Roxborough, F.F., Liu, Z.C. (1995), "Theoretical considerations on pick shape in rock and coal cutting", Proceeding of the 6th Underground Operator's Conference, Kalgoorlie, WA, Australia, pp. 189-193.
- Tuncdemir, H., Bilgin, N., Copur, H., Balci, C. (2008), "Control of rock cutting efficiency by muck size", International Journal of Rock Mechanics & Mining Sciences, Vol. 45, No. 2, pp. 278-288. https://doi.org/10.1016/j.ijrmms.2007.04.010
- Yang, S.Q., Jing, H.W. (2011), "Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compression", International Journal of Fracture, Vol. 168, No. 2, pp. 227-250. https://doi.org/10.1007/s10704-010-9576-4