References
- Baek, J., Choi, J. S., and Kim, S. I. (2001). "Development of estimation procedure of bedrock depth for flexible pavement through numerical simulation of FWD test," J. Korean Soc. of Civil Eng., Vol.21, No.5, pp.643-654.
- Choi, J. S., Lee, S. H., Kim, S. I., and Yoo, J. H. (1998). "A study on the evaluation of layer properties of flexible pavement with respect to dynamic effects of falling weight deflectometer 1: Development Backanalysis Procedure," J. Korean Soc. of Civil Eng., Vol.18, No.2-5, pp.623-634.
- Choi, Y. W., Choi, H., and Kim, J. M. (2015). "Cause of road cavity and action plan for road collapse prevention," Proc. of 2015 Korea Soc. of Road Eng. Conf., October 2015, Seoul, Korea.
- Kim, Y. R., Hibbs, B. O., and Lee, Y. C. (1995). "Temperature correction of deflections and backcalculated asphalt concrete moduli," Trans. Res. Rec., No. 1473, pp.55-62.
- Kim, Y. R., Lee, Y. C., and Ranjithan, S. R. (2000). Flexible pavement condition evaluation using deflection basin parameters and dynamic finite element analysis implemented by artificial neural networks, ASTM STP 1375.
- Kuwano, R. (2015). "Ground depression/cave-in caused by subsurface cavities," Presented in 2015 Korea Soc. of Earth and Expl. Geophy. Conf., May 14 2015, Seoul, Korea.
- Lee, J. K., Lee, S. Y., and Mun, S. H. (2016). "A study on voided-area analysis and remaining life prediction using the finite element method for pavement structures," Int. J. High. Eng., Vol. 18, No. 6. pp.131-136. https://doi.org/10.7855/IJHE.2016.18.6.131
- Molenaar, A. A. A. (1983). Structural Performance and Design of Flexible Road Constructions and Asphalt Concrete Overlays, Ph. D. Dissertation, Delft University of Technology, Delft, The Netherlands.
- Mun, S. and Kim, Y. R. (2009). "Backcalculation of subgrade stiffness under rubblised PCC slabs using multilevel FWD loads," Int. J. High. Eng., Vol.10, No.1, pp.9-18.
- Park, H. M., Kim, Y. T., Choi, J. Y., and Kim, K. H. (2016). "A preliminary study for assessing the risk of road collapse using accelerated pavement testing," Int. J. High. Eng., Vol. 18, No. 5, pp.57-62. https://doi.org/10.7855/IJHE.2016.18.5.057
- Park, S. W., Hwang, J. J., Hwang, K. Y., and Park, H. M. (2006). "Development of a model for predicting modulus on asphalt pavements using FWD deflection basins," J. Korean Soc. of Civil Eng., Vol.26, No.5D, pp.797-804.
- Seoul Metropolitan Government (2016). "First introduction of four-stage road cavity management levels for Seoul roads" News Release, November 23, 2016 (in Korean).
- Son, J. C., Rhee, S. K., An, D. S., and Park, H. M. (2006). "Development of the structural condition evaluation technique for asphalt pavements using falling weight deflectometer deflections," Int. J. High. Eng., Vol. 8, No. 4. pp.115-124.
- Talvik, O. and Aavik, A. (2009). "Use of FWD deflection basin parameters (SCI, BDI, BCI) for pavement condition assessment," The Baltic J. of Road and Bridge Eng., Vol. 4, No. 4, pp.196-202. https://doi.org/10.3846/1822-427X.2009.4.196-202
- Yoon, J. S., Baek, J., Choi, Y. W., Choi, H., and Lee, C. M. (2016). "Signal pattern analysis of ground penetrating radar for detecting road cavities," Int. J. High. Eng., Vol. 18, No. 6, pp.61-67. https://doi.org/10.7855/IJHE.2016.18.6.061
Cited by
- A Study for Improvement the Subsurface Cavity Management Grade Using Deflection Ratio vol.20, pp.6, 2018, https://doi.org/10.7855/IJHE.2018.20.6.117