DOI QR코드

DOI QR Code

Zero-Voltage-Transition Buck Converter for High Step-Down DC-DC Conversion with Low EMI

  • Ariyan, Ali (Department of Electrical Engineering, Isfahan (Khorasgan) Branch, Islamic Azad University) ;
  • Yazdani, Mohammad Rouhollah (Department of Electrical Engineering, Isfahan (Khorasgan) Branch, Islamic Azad University)
  • 투고 : 2017.04.05
  • 심사 : 2017.07.26
  • 발행 : 2017.11.20

초록

In this study, a new zero-voltage transition (ZVT) buck converter with coupled inductor using a synchronous rectifier and a lossless clamp circuit is proposed. The regular buck converter with tapped inductor has extended duty cycle for high step-down applications. However, the leakage inductance of the coupled inductor produced considerable voltage spikes across the switch. A lossless clamp circuit is used in the proposed converter to overcome this problem. The freewheeling diode was replaced with a synchronous rectifier to reduce conduction losses in the proposed converter. ZVT conditions at turn-on and turn-off instants were provided for the main switch. The synchronous rectifier switch turned on under zero-voltage switching, and the auxiliary switch turn-on and turn-off were under zero-current condition. Experimental results of a 100 W-100 kHz prototype are provided to justify the validity of the theoretical analysis. Moreover, the conducted electromagnetic interference of the proposed converter is measured and compared with its hard-switching counterpart.

키워드

참고문헌

  1. H. Wu, K. Sun, R. Chen, H. Hu, and Y. Xing, "Full-Bridge three-port converters with wide input voltage range for renewable power systems," IEEE Trans. Power Electron., Vol. 27, No. 9, pp. 3965-3974, Sep. 2012. https://doi.org/10.1109/TPEL.2012.2188105
  2. Y. Zhang, J. Liu, X. Ma, and J. Feng, "Comparison of conventional DC-DC converter and a family of diode-assisted DC-DC converter in renewable energy applications," Journal of Power Electronics, Vol. 14, No. 2, pp. 203-216, Mar. 2014. https://doi.org/10.6113/JPE.2014.14.2.203
  3. L. Chen, H. Wu, Y. Xing, and X. Xiao, "Performance evaluation of a 1kW non-isolated high step-up/step-down bidirectional converter for distributed battery storage system," in 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC), pp. 1-5, 2015.
  4. Q. Luo, B. Zhu, W. Lu, and L. Zhou, "High step-down multiple-output LED driver with the current auto-balance characteristic," Journal of Power Electronics, Vol. 12, No. 4, pp.519-527, Jul. 2012. https://doi.org/10.6113/JPE.2012.12.4.519
  5. H. Sira-Ramirez and M. A. Oliver-Salazar, "On the robust control of buck-converter DC-motor combinations," IEEE Trans. Power Electron., Vol. 28, No. 8, pp. 3912-3922, Aug. 2013. https://doi.org/10.1109/TPEL.2012.2227806
  6. M. G. Kim, "Error amplifier design of peak current controlled (PCC) buck LED driver," IEEE Trans. Power Electron., Vol. 29, No. 12, pp. 6789-6795, Dec. 2014. https://doi.org/10.1109/TPEL.2014.2304739
  7. A. De Nardo, N. Femia, G. Petrone, and G. Spagnuolo, "Optimal buck converter output filter design for point-of-load applications," IEEE Trans. Ind. Electron., Vol. 57, No. 4, pp. 1330-1341, Apr. 2010. https://doi.org/10.1109/TIE.2009.2030219
  8. T. Modeer, S. Norrga, and H. P. Nee, "High-voltage tapped-Inductor buck converter utilizing an autonomous high-side switch," IEEE Trans. Ind. Electron., Vol. 62, No. 5, pp. 2868-2878, May. 2015. https://doi.org/10.1109/TIE.2014.2365157
  9. K. Yao, M. Ye, M. Xu, and F. C. Lee, "Tapped-inductor buck converter for high-step-down DC-DC conversion," IEEE Trans. Power Electron., Vol. 20, No. 4, pp. 775-780, Jul. 2005. https://doi.org/10.1109/TPEL.2005.850920
  10. J.-il Kang, S.-K. Han, and J. Han, "Lossless snubber with minimum voltage stress for continuous current mode tapped-inductor boost converters for high step-up applications," Journal of Power Electronics, Vol. 14, No. 4, pp. 621-631, Jul. 2014. https://doi.org/10.6113/JPE.2014.14.4.621
  11. D.-H. Jang, J.-I. Kang, and S.-K. Han, "High efficiency lossless snubber for photovoltaic maximum power point tracker," Trans. the Korean Institute of Power Electronics (KIPE), Vol. 18. No. 5, pp. 485-491, Oct. 2013. https://doi.org/10.6113/TKPE.2013.18.5.485
  12. M. Nakamura, K. Ogura, and M. Nakaoka, "Soft switching PWM boost chopper-fed dc-dc power converter with load side auxiliary passive resonant snubber," Journal of Power Electronics, Vol. 4, No. 3, pp. 161-168, Jul. 2004.
  13. T. Ahmed, S. Nagai, E. Hiraki, and M. Nakaoka, "A newthree winding coupled inductor-assited high frequency boost chopper type dc-dc power converter with a high voltage conversion ratio," Journal of Power Electronics, Vol. 5, No. 2, pp. 99-103, Apr. 2005.
  14. J.-M. Kang, S.-H. Lee, S.-S. Hong, and S.-K. Han, "Voltage clamped tapped-inductor boost converter with high voltage conversion ratio," Trans. the Korean Institute of Power Electronics (KIPE), Vol. 17, No. 1, pp. 34-40, Feb. 2012. https://doi.org/10.6113/TKPE.2012.17.1.34
  15. J. J. Yun, H. J. Choe, Y. H. Hwang, Y. K. Park, and B. Kang, "Improvement of power-conversion efficiency of a DC-DC boost converter using a passive snubber circuit," IEEE Trans. Ind. Electron., Vol. 59, No. 4, pp. 1808-1814, April 2012. https://doi.org/10.1109/TIE.2011.2141095
  16. I. O. Lee, S. Y. Cho, and G. W. Moon, "Interleaved buck converter having low switching losses and improved stepdown conversion ratio," IEEE Trans. Power Electron., Vol. 27, No. 8, pp. 3664-3675, Aug. 2012. https://doi.org/10.1109/TPEL.2012.2185515
  17. C.-T. Pan, C.-F. Chuang, and C.-C. Chu, "A novel transformerless interleaved high step-down conversion ratio dc-dc converter with low switch voltage stress," IEEE Trans. Ind. Electron., Vol. 61, No. 10, pp. 5290- 5299, Oct. 2014. https://doi.org/10.1109/TIE.2014.2301774
  18. R. J. Wai and J. J. Liaw, "High-efficiency coupled-inductor-based step-down converter," IEEE Trans. Power Electron., Vol. 31, No. 6, pp. 4265-4279, Jun. 2016. https://doi.org/10.1109/TPEL.2015.2470105
  19. C. T. Tsai, C. L. Shen, J. C. Su, and Y. C. Kuo, "Analysis and implementation of an interleaved ZVS buck converter with coupled-inductors," in 2011 6th IEEE Conference on Industrial Electronics and Applications, pp. 1392-1397. 2011.
  20. K. I. Hwu, W. Z. Jiang, and Y. T. Yau, "Nonisolated coupled-inductor-based high step-down converter with zero DC magnetizing inductance current and non-pulsating output current," IEEE Trans. Power Electron., Vol. 31, No. 6, pp. 4362-4377, Jun. 2016. https://doi.org/10.1109/TPEL.2015.2477468
  21. E. Adib and H. Farzanehfard, "Zero-voltage-transition PWM converters with synchronous rectifier," IEEE Trans. Power Electron., Vol. 25, No. 1, pp. 105-110, Jan. 2010. https://doi.org/10.1109/TPEL.2009.2024153
  22. H. L. Do, "Zero-voltage-switching synchronous buck converter with a coupled inductor," IEEE Trans. Ind. Electron., Vol. 58, No. 8, pp. 3440-3447, Aug. 2011. https://doi.org/10.1109/TIE.2010.2084973
  23. J.-H. Park and B.-H. Cho, "The zero voltage switching (ZVS) critical conduction mode (CRM) buck converter with tapped-inductor," IEEE Trans. Power Electron., Vol. 20, No. 4, pp. 762-774, Jul. 2005. https://doi.org/10.1109/TPEL.2005.850919
  24. N. Mohan, T. M. Undeland, W. P. Robbins, Power Electronics, 3rd ed., New York: Wiley, 2003.
  25. J. H. Park and B. H. Cho, "Nonisolation soft-switching buck converter with tapped-inductor for wide-input extreme step-down applications," IEEE Trans. Circuits and Systems I: Regular Papers, Vol. 54, No. 8, pp. 1809-1818, Aug. 2007. https://doi.org/10.1109/TCSI.2007.902482