DOI QR코드

DOI QR Code

Three-Port Converters with a Flexible Power Flow for Integrating PV and Energy Storage into a DC Bus

  • Cheng, Tian (School of Electrical and Information Engineering, The University of Sydney) ;
  • Lu, Dylan Dah-Chuan (School of Electrical and Information Engineering, The University of Sydney)
  • 투고 : 2017.03.30
  • 심사 : 2017.07.22
  • 발행 : 2017.11.20

초록

A family of non-isolated DC-DC three-port converters (TPCs) that allows for a more flexible power flow among a renewable energy source, an energy storage device and a current-reversible DC bus is introduced. Most of the reported non-isolated topologies in this area consider only a power consuming load. However, for applications such as hybrid-electric vehicle braking systems and DC microgrids, the load power generating capability should also be considered. The proposed three-port family consists of one unidirectional port and two bi-directional ports. Hence, they are well-suited for photovoltaic (PV)-battery-DC bus systems from the power flow viewpoint. Three-port converters are derived by combining different commonly known power converters in an integrated manner while considering the voltage polarity, voltage levels among the ports and the overall voltage conversion ratio. The derived converter topologies are able to allow for seven different modes of operation among the sources and load. A three-port converter which integrates a boost converter with a buck converter is used as a design example. Extensions of these topologies by combining the soft-switching technique with the proposed design example are also presented. Experiment results are given to verify the proposed three-port converter family and its analysis.

키워드

참고문헌

  1. M. S. Nathan, R. Rajasekaran, and P. U. Rani, "Rules based functional control of bi-directional DC-DC converter for stand-alone PV with hybrid energy storage system," 2015 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS), pp. 1-6,
  2. L. An and D. D. C. Lu, "Design of a single-switch DC/DC converter for a PV-battery-powered pump system with PFM+ PWM control," IEEE Trans. Ind. Electron., Vol. 62, No. 2, pp. 910-921, Feb. 2015. https://doi.org/10.1109/TIE.2014.2359414
  3. Y. Du and D. D. C. Lu, "Battery-integrated boost converter utilizing distributed MPPT configuration for photovoltaic systems," Solar Energy, Vol. 85, No. 9, pp. 1992-2002, 2011. https://doi.org/10.1016/j.solener.2011.05.008
  4. T. Cheng, D. D. C. Lu, A. Gong, and D. Verstraete, "Analysis of a three-port DC-DC converter for PV-battery system using DISO boost and SISO buck converters," in Australasian Universities Power Engineering Conference (AUPEC), pp. 1-6, 2015.
  5. X. Sun, Y. Shen, W. L,i and H. Wu, "A PWM and PFM hybrid modulated three-port converter for a stand-alone PV/battery power system," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 3, No. 4, pp. 984-1000, Dec. 2015. https://doi.org/10.1109/JESTPE.2015.2424718
  6. Z. Qian, O. Abdel-Rahman, H. Al-Atrash, and I. Batarseh, "Modeling and control of three-port DC/DC converter interface for satellite applications," IEEE Trans. Power Electron., Vol. 25, No. 3, pp. 637-649, Mar. 2010. https://doi.org/10.1109/TPEL.2009.2033926
  7. K. Hariharan and N. Mohan, "Three-port series-resonant DC/DC converter to interface renewable energy sources with bi-directional load and energy storage ports," IEEE Trans. Power Electron., Vol. 24, No. 10, pp. 2289-2297, Oct. 2009. https://doi.org/10.1109/TPEL.2009.2022756
  8. Z. Wang and H. Li, "An integrated three-port bi-directional DC/DC converter for PV application on a DC distribution system," IEEE Trans. Power Electron., Vol. 28, No. 10, pp. 4612-4624, 2013. https://doi.org/10.1109/TPEL.2012.2236580
  9. J. L. Duarte, M. Hendrix, and M. G. Simoes, "Three-port bi-directional converter for hybrid fuel cell systems," IEEE Trans. Power Electron., Vol. 22, No. 2, pp. 480-487, Oct. 2007. https://doi.org/10.1109/TPEL.2006.889928
  10. D. S. Kanchan and N. Hadagali, "Bidirectional DC/DC converter system for solar and fuel cell powered hybrid electric vehicle." Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD), pp. 1-6, 2014.
  11. H. Wu, J. Zhang, and Y. Xing, "A family of multiport buck-boost converters based on DC-link-inductors (DLIs)." IEEE Trans. Power Electron., Vol. 30, No. 2, pp. 735-746, Feb.2015. https://doi.org/10.1109/TPEL.2014.2307883
  12. H. Wu, K. Sun, S. Ding, and Y. Xing, "Topology derivation of non-isolated three-port DCDC converters from DIC and DOC." IEEE Trans. Power Electron., Vol. 28, No. 7, pp. 3297-3307, Feb. 2013. https://doi.org/10.1109/TPEL.2012.2221746
  13. J. Betten, "Benefits of a coupled-inductor SEPIC converter," Power Management, 2011.
  14. D. C Dimna and M. Shahin, "Analysis of bi-directional SEPIC/Zeta converter with coupled inductor." 2015 International Conference on Advancements in Power and Energy (TAP Energy), pp. 103-108, 2015.
  15. Y. Tang, D. Zhu, C. Jin, P. Wang, and F. Blaabjerg, "A three-level quasi-two-stage single-phase PFC converter with flexible output voltage and improved conversion efficiency," IEEE Trans. Power Electron., Vol. 30, No. 2, pp. 717-726, Feb. 2015. https://doi.org/10.1109/TPEL.2014.2314136
  16. Y. C. Chuang, C. H. Yang, H. S. Chuang, and J. F. Chou, "Highly efficient ZCS boost converter used in rechargeable batteries," in IEEE 11th International Conference on Power Electronics and Drive Systems, pp. 964-974, 2015.
  17. S. H. Hwang, D. Y. Jung, Y. C. Jung, S. W. Lee, and C. Y. Won, "Soft-switching bi-directional DC/DC converter using a LC series resonant circuit," in International Conference on Electrical Machines and Systems, pp. 1-5, 2011.