DOI QR코드

DOI QR Code

Effectiveness of fibers and binders in high-strength concrete under chemical corrosion

  • 투고 : 2017.06.06
  • 심사 : 2017.09.06
  • 발행 : 2017.10.25

초록

Investigating the properties and durability of high-strength concrete exposed to sulfuric acid attack for the purpose of its application in structures exposed to this acid is of outmost importance. In this research, the resistance and durability of high-strength concrete containing macro-polymeric or steel fibers together with the pozzolans of silica fume or nano-silica against sulfuric acid attack are explored. To accomplish this goal, in total, 108 high-strength concrete specimens were made with 9 different mix designs containing macro-polymeric and steel fibers at the volume fractions of 0.5, 0.75, and 1.0%, as well as the pozzolans of silica fume and nano-silica with the replacement levels of 10 and 2%, respectively. After placing the specimens inside a 5% sulfuric acid solution in the periods of 7, 21, and 63 days of immersion, the effect of adding the fibers and pozzolans on the compressive properties, ultrasonic pulse velocity (UPV), and weight loss of high-strength concrete was investigated and the respective results were compared with those of the reference specimens. The obtained results suggest the dependency of the resistance and durability loss of high-strength concrete against sulfuric acid attack to the properties of fibers as well as their fraction in concrete volume. Moreover, compared with using nano-silica, using silica fume in the fibrous concrete mix leads to more durable specimens against sulfuric acid attack. Finally, an optimum solution for the design parameters where the crushing load of high-strength fibrous concrete is maximized was found using response surface method (RSM).

키워드

참고문헌

  1. ACI Committee 211 (2008), Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials ACI 211.4R-08, American Concrete Institute, Farmington Hills (MI).
  2. Afroughsabet, V. and Ozbakkaloglu, T. (2015), "Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers", Constr. Build. Mater., 94, 73-82. https://doi.org/10.1016/j.conbuildmat.2015.06.051
  3. Araghi, H.J., Nikbin, I.M., Reskati, S.R., Rahmani, E. and Allahyari, H. (2015), "An experimental investigation on the erosion resistance of concrete containing various PET particles percentages against sulfuric acid attack", Constr. Build. Mater., 77, 461-471. https://doi.org/10.1016/j.conbuildmat.2014.12.037
  4. Aslani, F. and Natoori, M. (2013), "Stress-strain relationships for steel fibre reinforced self-compacting concrete", Struct. Eng. Mech., 46(2), 295-322. https://doi.org/10.12989/sem.2013.46.2.295
  5. ASTM C143/C143M (2015), "Standard Test Method for Slump of Hydraulic-Cement Concrete", American Society for Testing and Materials International, United States.
  6. ASTM C597 (2016), "Standard test method for pulse velocity through concrete", United States: American Society for Testing and Materials International.
  7. Bogas, J.A., Gomes, M.G. and Gomes, A. (2013), "Compressive strength evaluation of structural lightweight concrete by nondestructive ultrasonic pulse velocity method", Ultrasonics, 53(5), 962-972. https://doi.org/10.1016/j.ultras.2012.12.012
  8. BS 1881-116 (1983), Testing Concretes, Method for determination of compressive strength of concrete cubes.
  9. Chang, Z.T., Song, X.J., Munn, R. and Marosszeky, M. (2005), "Using limestone aggregates and different cements for enhancing resistance of concrete to sulphuric acid attack", Cement Concrete Res., 35(8), 1486-1494. https://doi.org/10.1016/j.cemconres.2005.03.006
  10. Derringer, G. and Suich, R. (1980), "Simultaneous optimization of several response variables", J. Qual. Technol., 12(4), 214-219. https://doi.org/10.1080/00224065.1980.11980968
  11. Design-Expert (R) 8 software (2012), Stat-Ease, Inc., Minneapolis, MN, USA 2012.
  12. Ehrich, S., Helard, L., Letourneux, R., Willocq, J. and Bock, E. (1999), "Biogenic and chemical sulfuric acid corrosion of mortars", J. Mater. Civil Eng., 11(4), 340-344. https://doi.org/10.1061/(ASCE)0899-1561(1999)11:4(340)
  13. Fallah, S. and Nematzadeh, M. (2017), "Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume", Constr. Build. Mater., 132, 170-187. https://doi.org/10.1016/j.conbuildmat.2016.11.100
  14. Fattuhi, N.I. and Hughes, B.P. (1988), "Ordinary Portland cement mixes with selected admixtures subjected to sulfuric acid attack", Mater. J., 85(6), 512-518.
  15. Hasan-Nattaj, F. and Nematzadeh, M. (2017), "The effect of fortaferro and steel fibers on mechanical properties of high-strength concrete with and without silica fume and nano-silica", Constr. Build. Mater., 137, 557-572. https://doi.org/10.1016/j.conbuildmat.2017.01.078
  16. Hernandez, M.G., Izquierdo, M.A.G., Ibanez, A., Anaya, J.J. and Ullate, L.G. (2000), "Porosity estimation of concrete by ultrasonic NDE", Ultrasonics, 38(1), 531-533. https://doi.org/10.1016/S0041-624X(99)00095-5
  17. Hobbs, D.W. and Taylor, M.G. (2000), "Nature of the thaumasite sulfate attack mechanism in field concrete", Cement Concrete Res., 30(4), 529-533. https://doi.org/10.1016/S0008-8846(99)00255-0
  18. Hsu, L.S. and Hsu, C.T. (1994), "Stress-strain behavior of steelfiber high-strength concrete under compression", Struct. J., 91(4), 448-457.
  19. Hwang, J.P., Jung, M.S., Kim, M. and Ann, K.Y. (2015), "Corrosion risk of steel fibre in concrete", Constr. Build. Mater., 101, 239-245. https://doi.org/10.1016/j.conbuildmat.2015.10.072
  20. Kim, B., Boyd, A.J., Kim, H.S. and Lee, S.H. (2015), "Steel and synthetic types of fiber reinforced concrete exposed to chemical erosion", Constr. Build. Mater., 93, 720-728. https://doi.org/10.1016/j.conbuildmat.2015.06.023
  21. Koksal, F., Sahin, Y., Gencel, O. and Yigit, I. (2013), "Fracture energy-based optimisation of steel fibre reinforced concretes", Eng.g Fract. Mech., 107, 29-37. https://doi.org/10.1016/j.engfracmech.2013.04.018
  22. Lee, S.T., Hooton, R.D., Jung, H.S., Park, D.H. and Choi, C.S. (2008), "Effect of limestone filler on the deterioration of mortars and pastes exposed to sulfate solutions at ambient temperature", Cement Concrete Res., 38(1), 68-76. https://doi.org/10.1016/j.cemconres.2007.08.003
  23. Mangat, P.S. and Gurusamy, K. (1988), "Corrosion resistance of steel fibres in concrete under marine exposure", Cement Concrete Res., 8(1), 44-54.
  24. Mehta, P.K. (1985), "Studies on chemical resistance of low water/cement ratio concretes", Cement Concrete Res., 15(6), 969-978. https://doi.org/10.1016/0008-8846(85)90087-0
  25. Miao, C., Mu, R., Tian, Q. and Sun, W. (2002), "Effect of sulfate solution on the frost resistance of concrete with and without steel fiber reinforcement", Cement Concrete Res., 32(1), 31-34. https://doi.org/10.1016/S0008-8846(01)00624-X
  26. Monteny, J., De Belie, N., Vincke, E., Verstraete, W. and Taerwe, L. (2001), "Chemical and microbiological tests to simulate sulfuric acid corrosion of polymer-modified concrete", Cement Concrete Res., 31(9), 1359-1365. https://doi.org/10.1016/S0008-8846(01)00565-8
  27. Monteny, J., Vincke, E., Beeldens, A., De Belie, N., Taerwe, L., Van Gemert, D. and Verstraete, W. (2000), "Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete", Cement Concrete Res., 30(4), 623-634. https://doi.org/10.1016/S0008-8846(00)00219-2
  28. Naffa, S.O., Goueygou, M., Piwakowski, B. and Buyle-Bodin, F. (2002), "Detection of chemical damage in concrete using ultrasound", Ultrasonics, 40(1), 247-251. https://doi.org/10.1016/S0041-624X(02)00146-4
  29. Nematzadeh M. and Hasan-Nattaj, F. (2017), "Compressive stressstrain model for high-strength concrete reinforced with fortaferro and steel fibers", J. Mater. Civil Eng., 29(10), 04017152. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001990
  30. Nwokoye, D.N. and Eng, C. (1974), "Assessment of the elastic moduli of cement paste and mortar phases in concrete from pulse velocity tests", Cement Concrete Res., 4(4), 641-655. https://doi.org/10.1016/0008-8846(74)90012-X
  31. Rahimi, S., Nikbin, I.M., Allahyari, H. and Habibi, S. (2016), "Sustainable approach for recycling waste tire rubber and polyethylene terephthalate (PET) to produce green concrete with resistance against sulfuric acid attack", J. Clean. Product., 126, 166-177. https://doi.org/10.1016/j.jclepro.2016.03.074
  32. Santhanam, M., Cohen, M.D. and Olek, J. (2002), "Mechanism of sulfate attack: A fresh look: Part 1: Summary of experimental results", Cement Concrete Res., 32(6), 915-921. https://doi.org/10.1016/S0008-8846(02)00724-X
  33. Schmidt, T., Lothenbach, B., Romer, M., Neuenschwander, J. and Scrivener, K. (2009), "Physical and microstructural aspects of sulfate attack on ordinary and limestone blended Portland cements", Cement Concrete Res., 39(12), 1111-1121. https://doi.org/10.1016/j.cemconres.2009.08.005
  34. Shannag, M.J. (2000), "High strength concrete containing natural pozzolan and silica fume", Cement Concrete Compos., 22(6), 399-406. https://doi.org/10.1016/S0958-9465(00)00037-8
  35. Solis-Carcano, R. and Moreno, E.I. (2008), "Evaluation of concrete made with crushed limestone aggregate based on ultrasonic pulse velocity", Constr. Build. Mater., 22(6), 1225-1231. https://doi.org/10.1016/j.conbuildmat.2007.01.014
  36. Suleiman, A.R., Soliman, A.M. and Nehdi, M.L. (2014), "Effect of surface treatment on durability of concrete exposed to physical sulfate attack", Constr. Build. Mater., 73, 674-681. https://doi.org/10.1016/j.conbuildmat.2014.10.006
  37. Tamimi, A.K. (1997), "High-performance concrete mix for an optimum protection in acidic conditions", Mater. Struct., 30(3), 188-191. https://doi.org/10.1007/BF02486392
  38. Torii, K. and Kawamura, M. (1994), "Effects of fly ash and silica fume on the resistance of mortar to sulfuric acid and sulfate attack", Cement Concrete Res., 24(2), 361-370 https://doi.org/10.1016/0008-8846(94)90063-9
  39. Trtnik, G., Kavcic, F. and Turk, G. (2009), "Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks", Ultrasonics, 49(1), 53-60. https://doi.org/10.1016/j.ultras.2008.05.001
  40. Zarrin, O. and Khoshnoud, H.R. (2016), "Experimental investigation on self-compacting concrete reinforced with steel fibers", Struct. Eng. Mech., 59(1), 133-151. https://doi.org/10.12989/sem.2016.59.1.133

피인용 문헌

  1. A new post-peak behavior assessment approach for effect of steel fibers on bond stress-slip relationship of concrete and steel bar after exposure to high temperatures vol.278, pp.None, 2021, https://doi.org/10.1016/j.conbuildmat.2021.122340