참고문헌
- W. S. Miller, L. Zhuang, J. Bottema, A. J. Wittebrood, P. DE Smet, A. Hazler, A. Vieregge, 2000, Recent Development in Aluminium Alloys for the Automotive Industry, Mater. Sci. Eng. A, Vol. 280, No. 1, pp. 37-49. https://doi.org/10.1016/S0921-5093(99)00653-X
- S. Ashley, 1997, Getting a Hold on Mechatronics, Mech. Eng., Vol. 119, No. 5, pp. 56-61.
- K.-T. Kim, 2011, High Strength Aluminum Alloy for Die Casting, J. Kor. Fou. Soc., Vol. 31, No. 3, pp. 101-105. https://doi.org/10.7777/jkfs.2011.31.3.101
- J. H. Seo, S. K. Kim, 2011, Mechanical Properties of 0.25-0.65wt% CaO Added AM60B Eco-Mg Die Castings at Room and Elevated Temperatures, J. Kor. Fou. Soc., Vol. 31, No. 1, pp. 11-17. https://doi.org/10.7777/jkfs.2011.31.1.011
- J. H. Seo, H. K. Lim, S. K. Kim, 2010, Microstructures and Mechanical Properties of Die Cast 0.7wt% CaO Added Eco-Mg Parts, J. Kor. Fou. Soc., Vol. 30, No. 6, pp. 224-230.
-
S. J. Kim, S. K. Hyun, S. K. Kim, Y. O. Yoon, 2014, Modification Behavior of Eutectic Si with Varying Heat Treatment Conditions in A356 Alloy with
$Al_2Ca$ , J. Kor. Fou. Soc., Vol. 34, No. 5, pp. 156-161. https://doi.org/10.7777/jkfs.2014.34.5.156 - S. H. Kim, K. S. Kim, S. K. Kim, Y. O. Yoon, K. S. Cho, K. A. Lee, 2013, Microstructure and Mechanical Properties of Eco-2024 Aluminium Alloy, Adv. Mater. Res., Vol. 602-604, pp. 623-626.
- G. Y. Kim, K. S. Kim, J. C. Park, S. K, Kim, Y. K. Yoon, K. A. Lee, 2014, High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Modified A7075-T73 Alloy, Korean J. Met. Mater., Vol. 52, No. 4, pp. 283-291. https://doi.org/10.3365/KJMM.2014.52.4.283
- C. H. Caceres, B. I. Selling, 1996, Casting defects and the tensile properties of an Al-Si-Mg alloy, Mater. Sci. Eng. A, Vol. 32, No. 1-2, pp. 109-166.
- K. Nakata, Y. G. Kim, H. Fujii, T. Tsumuram T. Komazaki, 2006, Improvement of Mechanical Properties of Aluminum Die Casting Alloy by Multi-Pass Friction Stir Processing, Mater. Sci. Eng. A, Vol. 437, No.2, pp. 274-280. https://doi.org/10.1016/j.msea.2006.07.150
- M. Q. Cong, Z. Q. Li, J. S. Liu, M. Y. Yan, K. Chen, Y. D. Sun, M. Huang, C. Wang, B. P. Ding, S. L. Wang, 2012, Effect of Ca on the Microstructure and Tensile Properties of Mg-Zn-Si Alloys at Ambient and Elevated Temperature, J. Alloys Comp., Vol. 539, pp. 168-173. https://doi.org/10.1016/j.jallcom.2012.05.047
- G. Y. Kim, K. S. Kim, J. C. Park, S. K. Kim, Y. O. Yoon, K. A. Lee, 2014, High Cycle Fatigue and Fatigue Crack Propagation Behaviors of Modified A7075-T73 Alloy, Korean J. Met. Mater., Vol. 52, No. 4, pp. 283-291. https://doi.org/10.3365/KJMM.2014.52.4.283
- Y. Zeng, B. Jiang, D. Huang, J. Dai, F. Pan, 2013, Effect of Ca Addition on Grain Refinement of Mg-9Ki-1Al Alloy, J. Magnesium Alloys, Vol. 1, No. 4, pp. 297-302. https://doi.org/10.1016/j.jma.2013.12.002
- M. Liu, Q. Wang, X. Zeng, G. Yuan, Y. Zhu, W. Ding, 2005, Mechanical Properties and Creep Behavior of Mg-Al-Ca Alloys, Mater. Sci. Forum, Vol. 488-489, pp. 763-766. https://doi.org/10.4028/www.scientific.net/MSF.488-489.763
- Http://www.matweb.com/search/DataSheet.aspx.
- C. H. Caceres, C. J. Davidson, J. R. Griffiths, 1995, The Deformation and Fracture Behaviour of an A1-Si-Mg Casting Alloy, Mater. Sci. Eng. A, Vol. 197, No. 2, pp. 171-179. https://doi.org/10.1016/0921-5093(94)09775-5
- J. Z. YI, Y. X. Gao, P. D. Lee, H. M. Flower, T. C. Lindley, 2003, Scatter in Fatigue Life due to Effects of Porosity in Cast A356-T6 Aluminum-silicon Alloys, Met. Mater. Trans., Vol. 34, No. 9, pp. 1879-1890. https://doi.org/10.1007/s11661-003-0153-6
- Q. G. Wang, C. J. Davidson, J. R. Griffiths, P. N. Crepeau, 2006, Oxide Films, Pores and the Fatigue Lives of Cast Aluminum Alloys, Met. Mater. Trans., Vol. 37, No. 6, pp. 887-895. https://doi.org/10.1007/BF02735010