References
- M. Kobayashi, 1998, The Present Situation of Cold Drawn Special Sections, J. Jpn. Soc. Technol. Plast., Vol. 39, No. 4, pp. 43-45.
- B. L. Juneja, R. Prakash, 1975, An Analysis for Drawing and Extrusion of Polygonal Sections, Int. J. Mach. Tool Des. Res., Vol. 15, No. 1, pp. 1-18. https://doi.org/10.1016/0020-7357(75)90002-5
- B. B. Basily, D. H. Sansome, 1976, Some Theoretical Considerations for the Direct Drawing of Section Rod from Round Bar, Int. J. Mech. Sci., Vol. 18, No. 4, pp. 201-208. https://doi.org/10.1016/0020-7403(76)90026-6
- J. S. Gunasekera, S. Hoshino, 1982, Analysis of Extrusion or Drawing of Polygonal Sections Through Straightly Converging Dies, J. Eng. Ind., Vol. 104, No. 1, pp. 38-43. https://doi.org/10.1115/1.3185795
- R. NB. Wright, P. B. Marine, Y. Yi, 1987, Experimental Mechanics of Shaped Bar Drawing, Adv. Tech. Plast., Vol. 2, pp. 863-870.
- Y. C. Kim, Y. Choi, B. M. Kim, J. C. Choi, 1999, A Study on the Drawing of Rectangular Rod from Round Bar by using Rigid Plastic FEM and Neural Network, Trans. Mater. Process., Vol. 8, No. 4, pp. 331-339.
- M. S. Joun, S. M. Hwang, 1993, Pass Schedule Optimal Design in Multi-Pass Extrusion and Drawing by Finite Element Method, Int. J. Mech., Vol. 33, No. 5, pp. 713-724.
- M. Brucker, D. Keller, J. Reissner, 1988, Computer-Aided Drawing of Profiles from Round and Square Bar, CIRP Ann-Manuf. Techn., Vol. 37, No. 1, pp. 247-250. https://doi.org/10.1016/S0007-8506(07)61628-X
- K. Yoshida, S. Tuihiji, 2002, Multiple Drawing of Rails for Linear Motion Guide, Adv. Tech. Plast., Vol. 1, pp. 367-372.
- T. K. Lee, C. J. Lee, S. K. Lee, S. B. Lee, B. M. Kim, 2009, A Study on the Pass Schedule of Multi-pass Shape Drawing Process for Cross Roller Guide, Trans. Mater. Process., Vol. 18, No. 7, pp. 550-555. https://doi.org/10.5228/KSPP.2009.18.7.550
- S. K. Lee, J. E. Lee, T. K. Lee, S. B. Lee, B. M. Kim, 2009, Process Design of Multi-stage Shape Drawing Process for Cross Roller Guide, J. Korean Soc. Precis. Eng., Vol. 26, No. 11, pp. 124-130.
- J. E. Lee, T. K. Lee, S. K. Lee, S. M. Kim, B. M. Kim, 2009, A Study on Cross Sectional Shape Design of Intermediate Pass in the Multi-Stage Shape Drawing, Trans. Mater. Process., Vol. 18, No. 4, pp. 283-289. https://doi.org/10.5228/KSPP.2009.18.4.283
- S. M. Kim, S. K. Lee, C. J. Lee, B. M. Kim, M. S. Jeong, S. B. Lee, 2012, Process Design of Multi-pass Shape Drawing Considering the Drawing Stress, Trans. Mater. Process., Vol. 21, No. 4, pp. 265-270. https://doi.org/10.5228/KSTP.2012.21.4.265
- K. H. Lee, S. H. Kim, S. B. Lee, D. H. Kim, S. M. Kim, B. M. Kim, 2015, Design Method for the Intermediate Dies in Multi-Stage Shape Drawing - The Case for a Hollow Linear Motion Guide Rail, Trans. Mater. Process., Vol. 24, No. 3, pp. 155-160. https://doi.org/10.5228/KSTP.24.3.15
- S. H. Kim, 2014, M. D. Thesis, Pusan National University, Busan, pp. 6-17.
- J. H. Lee, B. S. Kang, B. M. Kim, 1995, Feasibility Study on Three-Dimensional Backward Tracing Scheme of Rigid-Plastic Finite Element Analysis, Trans. Mater. Process., Vol. 4, No. 3, pp. 267-281.