DOI QR코드

DOI QR Code

개량형 가동보에 적용하기 위한 패널형 유리섬유보강 폴리머 복합재료 클램핑 플레이트의 환경노출 성능

Environmental Exposure Performance of a Panel-Type Glass-Fiber-Reinforced Polymer Composite Clamping Plate for an Improved Moveable Weir

  • 투고 : 2017.08.22
  • 심사 : 2017.09.06
  • 발행 : 2017.09.30

초록

The improved movable weir supplements the advantages and disadvantages of the rubber weir and the conduction gate. It consists of a stainless steel gate, air bags, and a steel clamping plate. The stainless steel gate is the main body of the weir, and the inflatable rubber sheet serves to support the steel gate. The steel clamping plate is typically in direct continuous contact with water, but this leads to corrosion issues that can reduce the life of the entire movable weir. In this study, a panel-type glass-fiber-reinforced polymer (GFRP) clamping plate was designed and fabricated. The test results showed that the flexural load of the panel-type GFRP composite clamping plate was over twice that of the wings type GFRP clamping plate. The lowest moisture absorption value was obtained upon exposure to tap water, and exposure to other solutions showed similar values. Additionally, flexural load testing after exposure to an accelerated environment found the lowest residual loads of 80.51 % and 78.50 % at 50 and 100 days, respectively, for exposure to a $CaCl_2$ solution, while exposure to other environments showed residual failure loads of over 80 % at both 50 and 100 days.

키워드

참고문헌

  1. ACI 440H, 2000. Guide for the design and construction of concrete reinforced with FRP bars. American concrete institute committee 440, MI, USA. 2000.
  2. Choi, J. W., H. J. Joo, J. M. Kim, K. S. Lee, and S. J. Yoon, 2013. An Analytical Study on the Structural Performance Evaluation of the Multistage Overturing Movable Gate. Journal of KSSC. 25: 613-622.
  3. Choi, G. W., S. J. Byeon, Y. K. Kim, and S. U. Choi, 2008. The Flow Characteristic Variation by Installing a Movable Weir having Water Drainage. Journal of KSHM 8: 117-122.
  4. Choi, B. J., 2011. A Study on the Effect of Weir on Stream Flow and Ground Water. MS thesis. Seoul National University of Science and Technology, Seoul, Korea.
  5. Kim, P. S., S. J. Kim, J. H. Shim, and H. J. Park, 2010. The study of Flood Hazard Mitigation Effect for Movable Weir. Proceedings of the Korea Water Resources Association Conference, KWRA: 808-812 (in Korean).
  6. Dejke, V., 2001. Durability of FRP Reinforcement in Concrete. PhD Thesis, Chalmers University of Technology, Ettenberg, Sweden. 2001.
  7. Hwang, T. G. and J. G. Kim, 2008. Analysis of fluid-structure interaction for development of korean inflatable improved movable weirs for small hydropower. Journal of KSME 32: 1221-1230 (in Korean).
  8. Hugo C. Biscaia, Manuel A. G. Silva, Carlos Chastre, 2014. An experimental study of GFRP-to-concrete interfaces submitted to humidity cycles. Composites Structures 110: 354-368. https://doi.org/10.1016/j.compstruct.2013.12.014
  9. Jikai Zhou, Xudong Chen, Shixue Chen, 2011. Durability and service life prediction of GFRP bars embedded in concrete under acid environment. Nuclear Engineer and Design. 241: 4095-4102. https://doi.org/10.1016/j.nucengdes.2011.08.038
  10. Joao M. Sousa, Joao R. Correia, Susana Cabral-Fonseca, Antonio C. Diogo, 2014. Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications. Composites Structures 116: 720-731. https://doi.org/10.1016/j.compstruct.2014.06.008
  11. Kim, J. K., 2006. The Variation of Flow Characteristics by Installing Improved Movable Weir in a River. MS thesis. Inchon University, Inchon, Korea (in Korean).
  12. Kim, K. W., H. J. Kwon, P. S. Kim, and C. G. Park, 2015. Flexural and Interfacial Bond Properties of Hybrid Steel/Glass Fiber Reinforced Polymer Composites Panel Gate with Steel Gate Surface Deformation for Improved Movable Weir. Journal of KSAE 57: 57-66 (in Korean).
  13. Kim, H. H., T. G. Hwang, 2008. Analysis of fluid-structure interaction for development of inflatable improved movable weirs for small hydropower. Journal of Fluid Machin 11: 86-92 (in Korean). https://doi.org/10.5293/KFMA.2008.11.4.086
  14. Lee, J. W., C. G. Park, J. O. Kim, and S. K. Lee, 2010. Durability Characteristics of Glass Fiber Reinforced Polymer Composite Clamping Plates for Application of Rubber Dam. Journal of KSAE. 2012 53: 17-23 (in Korean).
  15. Lee, K. S., C. L. Jang, N. J. Lee, S. J. An, 2014. Analysis of Flow Characteristics of the Improved-Pneumatic-Movable Weir through the Laboratory Experiments. Journal of KWRA 47: 1007-1015 (in Korean).
  16. Micelli, F. and A. Nanni, 2001. Mechanical properties and durability of FRP rod. Report of CIES 00-22, Department of civil engineering, University of Missouri-Rolla, Missouri, U.S.A. 2001.
  17. Park, H. J., 2010. Study on the Effect of Weir on Stream Flow. MS thesis. Konkuk University, Seoul, Korea, 2010 (in Korean).
  18. Peng Feng, Jie Wang, Yi Wang, David Loughery, and Ditao Niu, 2014. Effects of corrosive environments on properties of pultruded GFRP plates. Composites Part B: Engineering 67: 427-433. https://doi.org/10.1016/j.compositesb.2014.08.021
  19. Park, C. G., S. Y. Yoo, J. C. Jeon, H. Kim, and J. W. Han, 2017. Performance evaluation of a glas fiber reinforced polymer composties clamping plate application of improved moveable weir for irrigation water, Proceedings of Academics World 71st International Conference, Phnom Penh, Combodia, 3rd-4th July 2017.
  20. Park, C. G. and J. P. Won, 2005. Effect of accelerated aging on the tensile and bond properties of FRP rebar for concrete. Journal of KSAE 47: 73-84 (in Korean).
  21. Park, C. G., J. P. Won, J. K. Yoo, 2003. Long-term effect of chemical environments on FRP reinforcing bar for concrete reinforcement. Journal of KSAE 15: 811-819 (in Korean).
  22. Rami Haj-Ali and Hakan Kilic, 2002. Nonlinear behavior of pultruded FRP composites, Composites Part B: Engineering 33: 173-191. https://doi.org/10.1016/S1359-8368(02)00011-2
  23. Saud Aldajah, Ghydaa Alawsi, and Safaa Abdul Rahmaan, 2009. Impact of sea and tap water exposure on the durability of GFRP laminates. Materials and Design 30: 1835-1840. https://doi.org/10.1016/j.matdes.2008.07.044
  24. Scalici, T., V. Fiore, G. Orlando, and A. Valenza, 2015. A DIC-based study of flexural behaviour of roving/mat/roving pultruded composites, Composites structures 131: 82-89. https://doi.org/10.1016/j.compstruct.2015.04.058
  25. Vijay, P. V., 1999. Aging and design of concrete members reinforced with GFRP bars, PhD Thesis, West Virginia University, Morgantown, West Virginia, USA, 1999.
  26. Yeo, C. G., Y. H. Kim, G. S. Seo, and J. W. Song, 2009. The study for Hydraulic Influence by installing Movable Weir. Conference of the Korean Society of Civil Engineers in 2009: 1452-1455 9 (in Korean).
  27. Yasushi Miyano, Masayuki Nakada, and Naoyuki Sekine, 2004. Accelerated testing for long-term durability of GFRP laminates for marine use. Composites Part B: Engineering 35: 497-503. https://doi.org/10.1016/j.compositesb.2003.11.006