DOI QR코드

DOI QR Code

Design of a 2kW Bidirectional Synchronous DC-DC Converter for Battery Energy Storage System

배터리 에너지 저장장치용 고효율 2kW급 양방향 DC-DC 컨버터 설계

  • Received : 2017.02.13
  • Accepted : 2017.04.17
  • Published : 2017.08.20

Abstract

This paper introduces the bidirectional dc-dc converter design case study, which employs silicon-carbide (SiC) MOSFETs for battery energy storage system (BESS). This converter topology is selected as bidirectional synchronous buck converter, which is composed of a half bridge converter, an inductor, and a capacitor, where the converter has less conduction loss than that of a unidirectional buck and boost converter, and to improve the converter efficiency, both the power stage design and power conversion architecture are described in detail. The conduction and switching losses are compared among three different SiC devices in this paper. In addition, the thermal analysis using Maxwell software of each switching device supports the loss analyses, in which both the 2 kW prototype analyses and experimental results show very good agreement.

Keywords

Acknowledgement

Supported by : (주)LS산전, 한국에너지기술평가원(KETEP)

References

  1. K. Tytelmaier, O. Husev, O. Veligorskyi, and R. Yershov, "A review of non-isolated bidirectional dc-dc converters for energy storage systems," 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF), Kharkiv, pp. 22-28, 2016.
  2. S. W. Kuo, Y. K. Lo, H. J. Chiu, S. J. Cheng, C. Y. Lin, and C. Yang, "A high-performance bidirectional DC-DC converter for DC micro-grid system application," 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA), Hiroshima, pp. 3185-3189, 2014.
  3. D. P. Urciuoli and C. W. Tipton, "Development of a 90 kW bi-directional DC-DC converter for power dense applications," Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, APEC '06., Dallas, TX, pp. 1375-1378, 2006.
  4. M. Jabbari, H. Farzanehfard, and G. Shahgholian, "Isolated topologies of switched-resonator converters," Journal of Power Electronics, Vol. 10, No. 2, pp. 125-131, Mar. 2010. https://doi.org/10.6113/JPE.2010.10.2.125
  5. M. Feng, K. Qu, J. Zhao, and M. Sun, "Non-isolated DC-DC converter with high voltage gain," 2016 IEEE Innovative Smart Grid Technologies - Asia (ISGT-Asia), Melbourne, VIC, pp. 730-734, 2016.
  6. L. Chen, H. Wu, Y. Xing, and X. Xiao, "Performance evaluation of a 1kW non-isolated high step-up/step-down bidirectional converter for distributed battery storage system," 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC), Taipei, pp. 1-5, 2015.
  7. J. Klein, "Synchronous buck MOSFET loss calculations with Excel model," Texas Instruments Inc., 2014.
  8. S. Musumeci, "Gate charge control of high-voltage Silicon-Carbide (SiC) MOSFET in power converter applications," 2015 International Conference on Clean Electrical Power (ICCEP), Taormina, pp. 709-715, 2015.
  9. D. Jauregui, B. Wang, and R. Chen, "Power loss calculation with common source inductance consideration for synchronous buck converters," Texas Instruments Inc., 2011.
  10. J. Kindmark and F. Rosen, "Powder material for inductor cores," Chalmers University of Technology, 2013.
  11. Ferromagnetic Material Properties, https://en.wikipedia.org/wiki/Ferromagnetic_material_properties
  12. "LC selection guide for the DC-DC synchronous buck converter," Application note, on Semiconductor, 2013.
  13. E. Kreyszig, "Advanced engineering mathematics," 9th edition, 2011.
  14. Y. H. Cho, H. S. Mok, J. K. Ji, and J. S. Lai, "Digital control strategy for single-phase voltage-doubler boost rectifiers," Journal of Power Electronics, Vol. 12, No. 4, pp. 623-631, Jul. 2012. https://doi.org/10.6113/JPE.2012.12.4.623