참고문헌
- Byon, S. M., Na, D. H. and Lee, Y., "Effect of Roll Gap Adjustment on Exit Cross Sectional Shape in Groove Rolling-Experimental and FE Analysis," Journal of Materials Processing Technology, Vol. 209, No. 9, pp. 4465-4470, 2009. https://doi.org/10.1016/j.jmatprotec.2008.10.045
- Kabo, E., "Material Defects in Rolling Contact Fatigue-Influence of Overloads and Defect Clusters," International Journal of Fatigue, Vol. 24, No. 8, pp. 887-894, 2002. https://doi.org/10.1016/S0142-1123(01)00193-1
- Hua, L., Deng, S., Han, X. and Huang, S., "Effect of Material Defects on Crack Initiation under Rolling Contact Fatigue in a Bearing Ring," Tribology International, Vol. 66, pp. 315-323, 2013. https://doi.org/10.1016/j.triboint.2013.06.008
- Deng, S., Qin, X. and Huang, S., "A Study on the Effect of Subsurface Crack Propagation on Rolling Contact Fatigue in a Bearing Ring," Journal of Mechanical Science and Technology, Vol. 29, No. 3, pp. 1029-1038, 2015. https://doi.org/10.1007/s12206-014-1114-2
- Tabacaru, L., Pruteanu, O., Carausu, C. and Gramescu, T., "Influence of the Driving Roll Speed on the Roughness and Shape Deviations of the Running Tracks of Cold Worked Bearing Rings," Metalurgia International, Vol. 14, pp. 18-22, 2009.
- Brusa, E., Lemma, L. and Benasciutti, D., "Vibration Analysis of a Sendzimir Cold Rolling Mill and Bearing Fault Detection," Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, Vol. 224, No. 8, pp. 1645-1654, 2010. https://doi.org/10.1243/09544062JMES1540
- Kappaganthu, K. and Nataraj, C., "Modeling and Analysis of Outer Race Defects in Rolling Element Bearings," Advances in Vibration Engineering, Vol. 11, No. 4, pp. 371-384, 2012.
- Farina, M., Osto, E., Perizzato, A., Piroddi, L. and Scattolini, R., "Fault Detection and Isolation of Bearings in a Drive Reducer of a Hot Steel Rolling Mill," Control Engineering Practice, Vol. 39, pp. 35-44, 2015. https://doi.org/10.1016/j.conengprac.2015.02.001
- Byon, S. M., "A Study on the Dynamic Setup of a Side Guide to Reduce Bar Camber at the Roughing Train in a Hot Strip Rolling Mill," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 34-41, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.034
- Shida, S., "Empirical Formula of Flow Stress of Carbon Steels - Resistance to Deformation of Carbon Steels at Elevated Temperature," J. the Japan Society for Technology of Plasticity, Vol. 10, pp. 610-617, 1969. (in Japanese)
- Han, M. and Cho, J., "Structural Durability Analysis of Bike Hub Bearing," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 99-104, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.099