참고문헌
- Wang, H. and Tsukamoto, H., 2001, "Fundamental Analysis on Rotor-Stator Interaction in a Diffuser Pump by Vortex Method," Journal of Fluids Engineering, Vol. 123(4), 737-747. https://doi.org/10.1115/1.1413242
- Dauherty, R.L., 1926, "A further investigation of performance of centrifugal pump when pumping oils," Bulletin 130. Gould Pumps.
- Stepanoff, A.J., 1964, Pumping viscous oils which centrifugal pumps. 2nd Edition, John Wiley and Sons inc., New York.
- Stoffel, B. 1980, Tests on centrifugal pumps for handling viscous liquids. Institute of Chemical Engineering's; paper no. 3.
- Li W.G, Hu Z.M., 1997, "An experimental study on performance of centrifugal oil pump," Fluids Mach., 25(2):3-7.
- Li WG, Deng D.L., 1999, "Reynolds number of centrifugal oil pumps and its effects on the performance," Pump Technol. (3):10-3.
- Li W.G. 2000., "Effects of viscosity of fluids on centrifugal pump performance and flow pattern in the impeller," Int. J. Heat Fluid Flow, (21):207-12.
- Bellary, S.A.I and Samad, A., 2015, "Numerical Analysis of Centrifugal Impeller for Different Viscous Liquids," International Journal of Fluid Machinery and Systems, Vol. 8, No. 1. 36-45. https://doi.org/10.5293/IJFMS.2015.8.1.036
- Anagnostopoulos, J.S. 2009, "A fast numerical method for flow analysis and blade design in centrifugal pump impellers," Comput Fluids; 38:284-9. https://doi.org/10.1016/j.compfluid.2008.02.010
- Singh, G. and Mitchell, J.W., 1998, "Energy savings from pump impeller trimming," ASHRAE Journal, 40 (4) 60-63.
- Kergourlay, G., Younsi, M., Bakir, F., Rey, R., 2007., "Influence of splitter blades on the flow field of a centrifugal pump: test-analysis comparison," International Journal of Rotating Machinery, Issue 1, Special section p1.
- Shigemitsu, T., Fukutomi, J., Kaji, K., 2011, "Influence of Blade Outlet Angle and Blade Thickness on Performance and Internal Flow Conditions of Mini Centrifugal Pump," International Journal of Fluid Machinery and Systems. Vol. 4, No. 3, 317-323. https://doi.org/10.5293/IJFMS.2011.4.3.317
- Shojaeefard, M.H., Tahani, M., Ehghaghi, M.B., Fallahian, M.A., Beglari, M., 2012, "Numerical study of the effects of some geometric characteristics of a centrifugal pump impeller that pumps a viscous fluid," Computers & Fluids. 60, 61-70. https://doi.org/10.1016/j.compfluid.2012.02.028
- Kim, S., Choi, Y.S., Lee, K.Y., Yoon, J.Y., 2009, "Design optimization of centrifugal pump impellers in a fixed meridional geometry using DOF," International Journal of Fluid Machinery and Systems, Vol. 2, No. 2, 172-178. https://doi.org/10.5293/IJFMS.2009.2.2.172
- Song, P., Zhang, Y., Xu, C., Zhou, X., Zhang, J., 2015, "Numerical studies on cavitation behavior in impeller of centrifugal pump with different blade profiles," International Journal of Fluid Machinery and Systems, Vol. 8, No. 2, 94-101. https://doi.org/10.5293/IJFMS.2015.8.2.094
- Pagalthivarthi, K.V., Gupta, P.K., Tyagi, V., Ravi, M.R., 2011, "CFD Predictions of Dense Slurry Flow in Centrifugal Pump Casings," International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol:5, No:3.
- Kelder J.D.H., Dijkers R.J.H., Esch B.P.M., Kruyt N.P., 2001., "Experimental and theoretical study of the flow in the volute of a low specific-speed pump," Fluid Dynamics Research, Vol. 28(4), 267-280. https://doi.org/10.1016/S0169-5983(00)00032-0
- Sato, S. and Furukawa, A., 2010., "Air-Water Two-Phase Flow Performances of Centrifugal Pump with Movable Bladed Impeller and Effects of Installing Diffuser Vanes," International Journal of Fluid Machinery and Systems, Vol. 3, No. 3, 245-252. https://doi.org/10.5293/IJFMS.2010.3.3.245
- Barrio, R., Fernandez, J., Blanco, E., Parrondo, J., 2011, "Estimation of radial load in centrifugal pumps using computational fluid dynamics," European Journal of Mechanics B/Fluids 30 316-324. https://doi.org/10.1016/j.euromechflu.2011.01.002
- Nishi, Y., Fukutomi, J., Fujiwara, R., 2011, "Radial Thrust of Single-Blade Centrifugal Pump," International Journal of Fluid Machinery and Systems, Vol. 4, No. 4, 239-247.
- Zhang, M., and Tsukamoto, H., 2005, "Unsteady Hydrodynamic Forces due to Rotor-Stator Interaction on a Diffuser Pump with Identical Number of Vanes on the Impeller and Diffuser," ASME Transactions, Journal of Fluids Engineering, Vol. 127, 743-751. https://doi.org/10.1115/1.1949640
- Gonzalez, J., Fernandez, E., Blanco, E., Santolaria, C., 2002, "Numerical simulation of the dynamic effects due to impeller- volute interaction in a centrifugal pump," ASME Journal of Fluids Engineering, Vol. 124(2), 348-355. https://doi.org/10.1115/1.1457452
- Wang, Y., Liu, H., Liu, D., Yuan, S., Wang, J., Jiang, L., 2016, "Application of the two-phase three-component computational model to predict cavitating flow in a centrifugal pump and its validation," Computers & Fluids, Vol. 131, Pages 142-150 https://doi.org/10.1016/j.compfluid.2016.03.022
- Liu, H. L., Liu, D. X., Wang, Y., Wu, X. F., Wang, J., Du, H., 2013, "Experimental investigation and numerical analysis of unsteady attached sheet cavitating flows in a centrifugal pump," Journal of Hydrodynamics, Ser. B, Vol. 25, Issue 3, 370-378 https://doi.org/10.1016/S1001-6058(11)60375-3
- Kobayashi, K. and Chiba, Y., 2010, "Computational fluid dynamics of cavitating flow in mixed flow pump with closed type impeller," International Journal of Fluid Machinery and Systems, Vol. 3, No. 2, 113-121. https://doi.org/10.5293/IJFMS.2010.3.2.113
- Yamamoto, K. and Tsujimoto, Y., 2009, "A Backflow Vortex Cavitation and Its Effects on Cavitation Instabilities," International Journal of Fluid Machinery and Systems, Vol. 2, No. 1, 40-54. https://doi.org/10.5293/IJFMS.2009.2.1.040
- Kang, D., Yonezawa, K., Horiguchi, H., Kawata, Y., Tsujimoto, Y., 2009, "Cause of cavitation instabilities in three dimensional inducer," International Journal of Fluid Machinery and Systems, Vol. 2, No. 3, 206-214. https://doi.org/10.5293/IJFMS.2009.2.3.206
- Kang, D., Watanabe, T., Yonezawa, K., Horiguchi, H., 2009, Yutaka Kawata, Yoshinobu Tsujimoto, "Inducer design to avoid cavitation instabilities," International Journal of Fluid Machinery and Systems, Vol. 2, No. 4, 439-448. https://doi.org/10.5293/IJFMS.2009.2.4.439
- Kim, J. H, Ishzaka, K., Watanabe, S., Furukawa, A., 2010, "Cavitation surge suppression of pump inducer with axi-asymmetrical inlet plate," International Journal of Fluid Machinery and Systems, Vol. 3, No. 1, 50-57. https://doi.org/10.5293/IJFMS.2010.3.1.050
- Lobanoff, V.S., Ross, R.R., 1992., "Centrifugal pumps: design and application," Gulf Professional Publishing, Huston.
- Karassik, I.J., Messina, J.P., Cooper, P., Heald, C.C., 2004., "Pump Handbook," McGraw.
- API standard 610, 2004., "Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries," 10th ed.
- ISO recommendation R 781, 1968., "measurement of fluid flow by means tubes," 1st ed.
- Moffat, R.J., 1982, "Contributions to the theory of single-sample uncertainty," ASME Journal of Fluids and Engineering; 104:250e60. https://doi.org/10.1115/1.3241818
- Menter, F.R., 1994, Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J; 32:1598-605. https://doi.org/10.2514/3.12149
- American National Standard for Centrifugal Pumps for Design and Application, ANSI/HI 1.3-2000, Section 1.3.4.1.11.
피인용 문헌
- Flow characteristics of a centrifugal pump with different impeller trimming methods vol.46, pp.4, 2018, https://doi.org/10.5937/fmet1804463K
- Improvement of Centrifugal Pump Performance by Using Different Impeller Diffuser Angles With and Without Vanes pp.1811-8216, 2018, https://doi.org/10.1017/jmech.2018.39
- The optimum position of impeller splitter blades of a centrifugal pump equipped with vaned diffuser vol.46, pp.3, 2018, https://doi.org/10.5937/fmet1802205K