참고문헌
- K. L. Leu, H. Huang, Y. Y. Chen, L. R. Huang and K. M. Ji, "An Intelligent Brake-By-Wire System Design and Analysis in Accordance with ISO-26262 Functional Safety Standard." International Conference on Connected Vehicles and Expo (ICCVE). IEEE, 2015.
- S. H. Jeon, J. H. Cho, Y. J. Jung, S. C. Park and T. M. Han, "Automotive Hardware Development According to ISO 26262.", International Conference on Advanced Communication Technology (ICACT), IEEE, 2011.
- C. Tao, "Functional Safety Concept Design of Hybrid Electric Vehicle following ISO 26262." Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), IEEE Conference and Expo. IEEE, 2014.
- H. Schubotz, "Hazard Analysis and Risk Assessment for Complex EE-Architecture," SAE Technical Paper 2010-01-0029, 2010.
- S. M. Mahmud and S. Alles, "In-Vehicle Network Architecture for the Next-Generation Vehicles," SAE Technical Paper 2005-01-1531, 2005.
- S. M. Yang, S. Y. Kim, Y. H. Ki and H. S. Ahn, "ECU-In-the-Loop Simulation for ESC Performance Analysis on the Selection of in-Vehicle Networks." Transactions of the Korean Society of Automotive Engineers, Vol. 21, No. 5, pp. 87-96, 2013. https://doi.org/10.7467/KSAE.2013.21.5.087
- A. D. G. Reddy and B. Ramkumar, "Simulation Studies on ZigBee Network for in-Vehicle Wireless Communications.", International Conference on Computer Communication and Informatics (ICCCI), IEEE, pp. 1-6, 2014.
- AC. Ai, F. Zhang and R. Liu, "Research on Wireless Backup for CAN in Process Control System.", 1st Annual RFID Eurasia, pp. 1-6, 2007.
- Y. Ying, L. Weiguo and I. S. Tukur, "Performance Analysis and Simulation of Vehicle Electronic Stability Control System.", Computing and Applications for Business Engineering and Science (DCABES), 14th International Symposium on IEEE, pp. 415-418, 2015.
- P. Srivastava, M. Karle, U. S. Karle, and A. A. Deshpande, "Development of Electrical Power Assisted Steering (EPAS) Considering Safety and Reliability Aspects as per ISO 26262.", SAE Technical Paper 2015-26-0086, 2015.
- ISO 26262 Road vehicles - Functional safety - Part 3: Concept phase, 2011.
- ISO 26262 Road vehicles - Functional safety - Part 4: Product development at the system level, 2011.
- ISO 26262 Road vehicles - Functional safety - Part 5: Product development at the hardware level, 2011.
- M. Hillenbrand, M. Heinz, N. Adler, J. Matheis and K. D. Müller-Glaser, "Failure Mode and Effect Analysis based on Electric and Electronic Architectures of Vehicles to Support the Safety Lifecycle ISO/DIS 26262.", Proceedings of 21st IEEE International Symposium on Rapid System Protyping. IEEE, 2010.
- N. Adler, S. Otten, P. Cuenot and K. Adler, N., Otten, S., Cuenot, P., & Muller-Glaser, "Performing Safety Evaluation on Detailed Hardware Level According to ISO 26262.", SAE Technical Paper 2013-01-0182, 2013.
- Y. C. Chang, L. R. Huang, H. C. Liu, C. J. Yang and C. T. Chiu, "Assessing Automotive Functional Safety Microprocessor with ISO 26262 Hardware Requirements.", International Symposium on VLSI Design, Automation and Test (VLSI-DAT), IEEE, pp. 1-4, 2014.