DOI QR코드

DOI QR Code

PSCAD/EMTDC를 이용한 MW급 ESS용 성능평가설비 모델링 방안에 관한 연구

A Study on the Modeling Method of Performance Evaluation System for MW Scaled Energy Storage System Using the PSCAD/EMTDC

  • Kang, Min-Kwan (Dept. of Electrical Engineering, Korea University of Technology and Education) ;
  • Choi, Sung-Sik (Dept. of Electrical Engineering, Korea University of Technology and Education) ;
  • Park, Jae-Beom (Dept. of Electrical Engineering, Korea University of Technology and Education) ;
  • Nam, Yang-Hyeon (Dept. of Electrical Engineering, Korea University of Technology and Education) ;
  • Kim, Eung-Sang ;
  • Rho, Dae-Seok (Dept. of Electrical and Engineering, Korea University of Technology and Education)
  • 투고 : 2017.02.10
  • 심사 : 2017.05.31
  • 발행 : 2017.06.01

초록

The energy storage system(ESS) is a core component for exchanging the power system structure of the unidirectional power flow into a bidirectional structure. Its important role has been increasing because it has multiple functions such as output stabilization of new renewable energy, demand management, frequency regulation, etc. However, the performance evaluation technology of ESS in korea is lower than one of advanced countries and the recognition of standardization is also lack compared to advanced countries. Furthermore, in order to more accurately and reliably validate the performance of the ESS in advanced countries, it has been required to perform not only performance testing by H/W devices but also performance verification by S/W tool. Therefore, in order to verify the performance testing of ESS by S/W tool, this paper proposes the modeling method of performance testing devices for MW scaled ESS by using the PSCAD/EMTDC S/W, based on real testing devices in domestic institute. From the simulation results of proposed modeling method, it is confirmed that the proposed modeling method is a useful tool for performance validation of ESS.

키워드

참고문헌

  1. Eungsang Kim, "Standardization and technical standards for new renewable energy and ESS power converters", Fall Conference for Society A of KIEE(Korean Institute of Electrical Engineers), Journal of Power Electronics, pp. 31-35, April, 201
  2. IEEE 1547.1, "IEEE Standard conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power System", June, 2005
  3. IEEE 1547. 6, "IEEE Standard conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power System", June, 2009
  4. IEC 61000-4-11, "Voltage dips, short interruptions and voltage variation immunity test", 2014
  5. Korea Electrotechnology Research Institute (KERI), 2013, "Construction of Test Facilities for MW Class Energy Storage system and Power Converter".
  6. Jeong-Ik Jang, Dong-Choon Lee, Seoung-Young Koo "Nonlinear Control of Output Voltage of PWM Inverters for Stand-Alone WIND Power Generation", The Korean Institute of Power Electronics, Vol. 12, No. 2, pp. 131-138, April, 2007.
  7. So-Hee Kim, Byung-Ki Kim and Dae-Seok Rho "A study on Fault Characteristics of Wind Power in Distribution System" Journal of the Korea Academia-Industrial cooperation Society, Vol. 13, No. 3, pp. 1288-1295, March 2012. https://doi.org/10.5762/KAIS.2012.13.3.1288
  8. JAE-EON KIM, "Modeling & Operating Algorithm of Islanding Microgrid with Wind Turbine, Diesel Generator and BESS", Journal of the Korea Academia-Industrial cooperation Society, Vol. 15, No. 9, pp. 5893-5898, 2014. https://doi.org/10.5762/KAIS.2014.15.9.5893
  9. ByungKi Kim, "A Study on the Voltage Stabilization Method of Distribution System Using Step Voltage Regulator and Energy Storage System", August, 2015.
  10. Sungsik Choi, "Modeling of Performance Test Devices for MW Class Energy Storage System Using the PSCAD/EMTDC", Conference of the korea academia-industrial cooperation society, Dec. 2016.
  11. Daeseok Rho, "Modeling of ESS Performance Test Devices Using the PSCAD/EMTDC", Fall Conference for Society A of KIEE(Korean Institute of Electrical Engineers), Nov, 2016