The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

The Estimation of Torque Ripple According to Parameters Considered Time-varying in Voltage Equation

전압방정식에서 시변성이 고려된 파라미터에 의한 토크 리플 산정

  • Gim, Gyu-Hwa (Dept. of Electrical Engineering, Changwon National University) ;
  • Cho, Gyu-Won (Motor R&D Center, S&T Motiv) ;
  • Kim, Gyu-Tak (Dept. of Electrical Engineering, Changwon National University)
  • Received : 2017.01.10
  • Accepted : 2017.06.27
  • Published : 2017.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the calculation torque using the d-q axis has advantage like faster execution time. However, the torque ripple can't be considered in the torque calculation using d-q axis equivalent circuit because the time-dependent component is removed. When d-q transformation was performed, it was founded that some parameters has some characteristics. These characteristics were considered for representing torque ripple. The calculation with d-q axis transformation and Finite Element Analysis(FEA) were performed, and the results were compared. As a result, it was validated that the calculated torque can be expressed with ripple.

Keywords

References

  1. C. C. Chan, K. T. Chau, "Novel Permanent Magnet Motor Drives for Electric Vehicles", IEEE Trans on Industrial Elctronics, Vol. 43, No. 2, 1996.
  2. Ishii S, Hasegawa Y, Nakamura K, Ichinokura O, "Characteristics of novel flux barrier type outer rotor IPM motor with rare-earth and ferrite magnets", 2012 International Conference on Renewable Energy Research and Applications (ICRERA), pp. 1-4, 2012.
  3. M. Z. Ahmad, E. Sulaiman, Z. A. Haron, T. Kosaka, "Design Improvement of a New Outer-Rotor Hybrid Excitation Flux Switching Motor for In-Wheel Drive EV", 2013 IEEE 7th International Power Engineering and Optimization Conference (PEOCO), pp. 298-303, 2013.
  4. S. Morimoto, M. Sanada and Y. Taketa, "Wide-Speed Operation of interior Permanent Magnet Synchronous Motors with High-Performance Current Regulator," IEEE Trans. Ind. Appl., vol. IA-30, no. 4, July/Aug., pp. 920-926, 1994.
  5. Jong-Bin Im, Wonho Kim, Chang-Sung Jin, Jae-Hak Choi, and Ju Lee "Inductance Calculation Method of Synchronous Reluctance Motor Including Iron Loss and Cross Magnetic Saturation," IEEE Trans On Magn., vol. 45, no. 6, pp. 2803-2806, 2009. https://doi.org/10.1109/TMAG.2009.2018663
  6. A. Kioumarsi, M. Moallem, B. Fahimi, "Mitigation of Torque Ripple in Interior Permanent Magnet Motors by Optimal Shape Design", IEEE Transactions on Magnetics, vol. 42, No. 11, pp. 3706-3711, 2006. https://doi.org/10.1109/TMAG.2006.881093
  7. Paul C. Krause, et al., Analysis of electric machinery and drive system, 2nd ed, Wiley-interscience. 2002.
  8. R. A. Sosseh and K. M. Lee, "Finite element torque modeling for the design of a spherical motor," 7th International Conference on Control Automation Robotics and Vision, Singapore, pp. 390-395, December 2002.