References
- Saji, G., 2014, "Safety goals for seismic and tsunami risks: Lessons learned from the Fukushima Daiichi disaster," Nucl. Eng. Des., Vol. 280, pp. 449-463. https://doi.org/10.1016/j.nucengdes.2014.09.013
- Stevenson, J.D., 2014, "Summary of the historical development of seismic design of nuclear power plants in Japan and the U.S.", Nucl. Eng. Des., Vol. 269, pp. 160-164. https://doi.org/10.1016/j.nucengdes.2013.08.023
- Nakamura, I. and Kasahara, N., 2015, "Excitation tests on elbow pipe specimens to investigate failure behavior under excessive seismic loads," Proc. of PVP Conf., PVP2015-45711.
- Donavin, P.R., 2016, "Technical Basis for Proposed ASME Section XI Code Case on Beyond Design Bases Earthquake," Proc. of PVP Conf., PVP2016-63827.
- ASME, ASME B&PV Code Sec. III, Nuclear components, 1998 edition.
- Paul, S.K., Sivaprasad, S., Dhar, S., and Tarafder, S., 2011, "Key issues in cyclic plastic deformation: Experimentation," Mech. of Mater., Vol. 43, pp. 705-720. https://doi.org/10.1016/j.mechmat.2011.07.011
- OECD/NEA, 2015, "Interim Report on Metallic Components Margins under High Seismic Loads," NEA/CSNI/R(2015)8.
- ASTM, 1998, Standard Practice for Strain-Controlled Fatigue Testing, ASTM E606-92 (Reapproved 1998).
- Kim, I.S. and Kang, S.S., 1995, "Dynamic strain aging in SA508-class 3 pressure vessel steel," Int. J. Pres, Ves. & Piping, Vol. 62, pp.123-129. https://doi.org/10.1016/0308-0161(95)93969-C
- Dieter, G.E., Mechanical Metallugy 3rd Edition, McGraw-Hill (2011).
- Murty, K.L. and Charit, I., An Introduction to Nuclear Materials, Wiley-VCH (2013).
- USNRC, 1999, "Effects of LWR Coolant Environments on Fatigue Design Curves of Austenitic Stainless Steels," NUREG/CR-5704.
- USNRC, 1998, "Effects of LWR Coolant Environments on Fatigue Design Curves of Carbon and Low-Alloy Steels," NUREG/CR-6583.