DOI QR코드

DOI QR Code

비등 열전달 시스템의 안정성 향상을 위한 탄소나노튜브 코팅의 열전달 및 내구성에 대한 연구

A Study on the Heat Transfer and Durability of Carbon Nano Coating for the Safety Improvement of a Pool Boiling System

  • 전용한 (상지영서대학교 소방안전과) ;
  • 김영훈 (제주대학교 에너지공학과) ;
  • 김남진 (제주대학교 에너지공학과)
  • Jeon, Yong-Han (Dept. of Fire and Frotection, Sangji-Youngseo college) ;
  • Kim, Young-Hun (Dept. of Nuclear & Energy Engineering, Jeju National univ.) ;
  • Kim, Nam-Jin (Dept. of Nuclear & Energy Engineering, Jeju National univ.)
  • 투고 : 2017.01.20
  • 심사 : 2017.03.01
  • 발행 : 2017.03.31

초록

In this study, we investigated to the heat transfer performance of coating nano-structure with various shapes and patterns on the heat transfer surface. As a result of the measurement of the 3D nano shape, it was confirmed that the roughness generally increases when the adhesive is sprayed on the coating surface and finished durability experiment. In the case of TEOS adhesive, the roughness increased by $0.074{\mu}m$, $0.012{\mu}m$ and $0.015{\mu}m$, and the contact angle decreased $12.64^{\circ}$, $1.31^{\circ}$, $9.84^{\circ}$ at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of PVA adhesive, the roughness increased by $0.069{\mu}m$, $0.056{\mu}m$ and $0.03{\mu}m$, and the contact angle decreased $2.85^{\circ}$, $4.82^{\circ}$, $6.96^{\circ}$ at the coating time of 120 seconds, 180 seconds and 240 seconds, respectively. In the case of DGEBF adhesive, the roughness increased by $0.042{\mu}m$, $0.053{\mu}m$ and $0{\mu}m$, and the contact angle decreased $0.81^{\circ}$ at the coating time of 120 seconds, increased $4.82^{\circ}$, $6.96^{\circ}$ at the coating time of 180 seconds and 240 seconds, respectively. As a result, the durability tends to decrease as more nano-structures are deposited, and 3D nano shapes, contact angles and SEM photographs showed that the performance of the PVA adhesive was superior among the three adhesives.

키워드

참고문헌

  1. Incropera, F.P., DeWitt, D.P., Bergman, T.L., Lavine, A.S., Principles of heat and mass transfer, 7th edition, Wiley.
  2. Kim, J.M., Kim, T.J., Kim, J.Y., Kim, M.H., Ahn, H.S.(2014), "Effect of a graphene oxide coating layer on critical heat flux enhancement under pool boiling." International Journal of Heat and Mass Transfer. Vol. 77. June: 919-927. https://doi.org/10.1016/j.ijheatmasstransfer.2014.06.017
  3. Lee, S.H., Seo, G.H., Lee, S.H., Jeong, U.J. Lee, S.J., Kim, S.J., Choi, W.J.(2016), "Layer-by-Layer carbon nanotube coatings for enhanced pool boiling heat transfer on metal surfaces." Carbon. Vol. 107. October: 607-618. https://doi.org/10.1016/j.carbon.2016.06.039
  4. Sujith Kumar C.S., Suresh, S., Yang, L., Aravind, S.(2014), "Flow boiling heat transfer enhancement using carbon nanotube coatings." Applied Thermal Engineering. Vol. 65. April: 166-175 https://doi.org/10.1016/j.applthermaleng.2013.12.053
  5. Jun, S.C., Kim, J.S., Son, D.G., Kim, H.Y., You, S.S.(2016), "Enhancement of Pool Boiling Heat Transfer in Water Using Sintered Copper Microporous Coatings." Nuclear Engineering and Technology. Vol. 48. No. 4. August: 932-940. https://doi.org/10.1016/j.net.2016.02.018