DOI QR코드

DOI QR Code

A New Design for Cascaded Multilevel Inverters with Reduced Part Counts

  • Received : 2016.05.11
  • Accepted : 2017.03.30
  • Published : 2017.08.25

Abstract

This paper deals with the design and implementation of an efficient topology for cascaded multilevel inverters with reduced part counts. In the proposed design, a well-established basic unit is first developed. The series extension of this unit results in the formation of the proposed multilevel inverter. The proposed design minimizes the number of power electronic components including insulated-gate bipolar transistors and gate driver circuits, which in turn cuts down the size of the inverter assembly and reduces the operating power losses. An explicit control strategy with enhanced device efficiency is also acquired. Thus, the part count reductions enhance not only the economical merits but also the technical features of the entire system. In order to accomplish the desired operational aspects, three algorithms are considered to determine the magnitudes of the dc voltage sources effectively. The proposed topology is compared with the conventional cascaded H-bridge multilevel inverter topology, to reflect the merits of the presented structure. In continue, both the analytical and experimental results of a cascaded 31-level structure are analyzed. The obtained results are discussed in depth, and the exemplary performance of the proposed structure is corroborated.

Keywords

References

  1. J. H. Kim, S. K. Sul, and P. N. Enjeti, IEEE Trans. Ind. Appl., 44, 4 (2008). [DOI: http://dx.doi.org/10.1109/TIA.2008.926201]
  2. O. Lopez, J. Alvarez, J. Doval-Gandoy, F. D. Freijedo, A. Nogueiras, A. Lago, and C. M. Penalver, IEEE Trans. Ind. Electron., 55, 4 (2008). [DOI: http://dx.doi.org/10.1109/TIE. 2008.917159]
  3. M. F. Kangarlu and E. Babaei, IEEE Trans. Power Electron., 28, 2 (2013). [DOI: http://dx.doi.org/10.1109/TPEL.2012.2203339]
  4. A. Ajami, M.R.J. Oskuee, M. T. Khosroshahi, and A. Mokhberdoran, IET Power Electron., 7, 3 (2014). [DOI: http://dx.doi.org/10.1049/iet-pel.2013.0261]
  5. J. Rodriguez, S. Bernet, P. K. Steimer, and I. E. Lizama, IEEE Trans. Ind. Electron., 57, 7 (2010). [DOI: http://dx.doi.org/10.1109/TIE.2009.2032430]
  6. A. Nabae, I. Takahashi, and H. Akagi, IEEE Trans. Ind. Appl., IA-17, 5 (1981). [DOI: http://dx.doi.org/10.1109/TIA.1981.4503992]
  7. B. P. McGrath and D. G. Holmes, IEEE Trans. Power Electron., 24, 6 (2009). [DOI: http://dx.doi.org/10.1109/TPEL.2009.2016567]
  8. M. Khazraei, H. Sepahvand, K. A. Corzine, and M. Ferdowsi, IEEE Trans. Ind. Electron., 59, 2 (2012). [DOI: http://dx.doi.org/10.1109/TIE.2011.2157290]
  9. Z. Du, L. M. Tolbert, B. Ozpineci, and J. N. Chiasson, IEEE Trans. Power Electron., 24, 1 (2009). [DOI: http://dx.doi.org/10.1109/TPEL.2008.2006678]
  10. N. Farokhnia, S. H. Fathi, N. Yousefpoor, and M. K. Bakhshizadeh, IET Power Electron., 5, 1 (2012). [DOI: http://dx.doi.org/10.1049/iet-pel.2011.0092]
  11. M. F. Kangarlu, E. Babaei, and M. Sabahi, IET Power Electron., 6, 6 (2013). [DOI: http://dx.doi.org/10.1049/iet-pel.2012.0563]
  12. I. Colak, E. Kabalci, and R. Bayindir, Energy Convers. Manage., 52, 2 (2011). [DOI: http://dx.doi.org/10.1016/j.enconman.2010.09.006]
  13. K. K. Gupta, A. Ranjan, P. Bhatnagar, L. K. Sahu, and S. Jain, IEEE Trans. Power Electron., 31, 135 (2016). [DOI: http://dx.doi.org/10.1109/TPEL.2015.2405012]
  14. S. Ramkumar, V. Kamaraj, S. Thamizharasan, and S. Jeevananthan, Int. J. Elec. Power, 36, 93 (2012). [DOI: http://dx.doi.org/10.1016/j.ijepes.2011.10.028]
  15. S. N. Rao, D.V.A. Kumar, and C. S. Babu, Proc. 2013 International Conference on Power, Energy and Control (ICPEC) (IEEE, Sri Rangalatchum Dindigul, India, 2013) p. 693-699. [DOI: http://dx.doi.org/10.1109/ICPEC.2013.6527745]
  16. E. Babaei, S. Alilu, and S. Laali, IEEE Trans. Ind. Electron., 61, 3932 (2014). [DOI: http://dx.doi.org/10.1109/TIE.2013.2286561]
  17. A. Mokhberdoran and A. Ajami, IEEE Trans. Power Electron., 29, 6712 (2014). [DOI: http://dx.doi.org/10.1109/TPEL.2014.2302873]
  18. S. Thamizharasan, J. Baskaran, and S. Ramkumar, J. Electr. Eng. Technol., 10, 1552 (2015). [DOI: http://dx.doi.org/10.5370/JEET.2015.10.4.1552]
  19. M. Carpita and S. Teconi, Proc. 4th European Conference on Power Electronics and Applications, Centro Congressi di Firenze (Litografia GEDA, Firenze, Italy, 1991) p. 90-94.
  20. Y. S. Lai and F. S. Shyu, IEE Proceedings - Electric Power Applications, 149, 449 (2002). [DOI: http://dx.doi.org/10.1049/ip-epa:20020480]
  21. D. C. Ludois, J. K. Reed, and G. Venkataramanan, IEEE Trans. Ind. Electron., 57, 2679 (2010). [DOI: http://dx.doi.org/10.1109/TIE.2009.2030205]
  22. E. Babaei, S. H. Hosseini, G. B. Gharehpetian, M. T. Haque, and M. Sabahi, Electr. Power Syst. Res., 77, 1073 (2007). [DOI: http://dx.doi.org/10.1016/j.epsr.2006.09.012]