DOI QR코드

DOI QR Code

Refining of Vacuum Residues by Aquathermolysis Reaction

Aquathermolysis 반응에 의한 감압잔사유의 개질

  • Ko, Jin Young (Department Chemical Engineering, Hoseo University) ;
  • Park, Dong Ho (Department Chemical Engineering, Hoseo University) ;
  • Park, Seung-Kyu (Department Chemical Engineering, Hoseo University)
  • 고진영 (호서대학교 화학공학과) ;
  • 박동호 (호서대학교 화학공학과) ;
  • 박승규 (호서대학교 화학공학과)
  • Received : 2017.05.15
  • Accepted : 2017.05.31
  • Published : 2017.08.10

Abstract

In this study, the reforming reaction of vacuum residue (VR) was carried out using aquathermolysis reaction. VR showed a prone to decrease the amount of resins and asphaltenes in the constituents, and to increase saturates and aromatics when reacting with steam at 30 bar and above $300^{\circ}C$ for 24 h. This tendency became more evident when the amount of steam used was excessive than the amount of VR. When the aquathermolysis reaction was performed at $300^{\circ}C$ and 30 bar for 48 h, the VR composition was changed from the initial state (S/A/R/A = 7.3%/43.7%/25.6%/23.5%) to final state (S/A/R/A = 6.8%/57%/12.2%/24.0%), and the contents of the resins decreased by 13% and the aromatic compounds increased by 13%. The viscosity decreased from 880,000 cp to 290,000 cp by 68%. When 10% of decalin, which is easy to provide hydrogen, was added, the viscosity decreased by 68% in 24 h. The VR composition showed a reduction in the contents of resins and asphaltenes from 49% to 17% from the initial state (S/A/R/A = 7.3%/43.7%/25.6%/23.5%) to the final state (S/A/R/A = 4.5%/63.5%/12.5%/20.0%), and the content of aromatics was maximized to 63.5%. The gas layer formed by the aquathermolysis reaction in the reactor chamber was collected and analyzed by GC-MS spectroscopy. As a result, various hydrocarbon compounds such as ethylbenzene, octane and dimethylbenzene were detected.

본 연구에서는 aquathermolysis 반응을 이용하여 감압잔사유(VR)의 개질 반응을 실시하였다. 감압잔사유는 30 bar, $300^{\circ}C$ 이상에서 24 h 동안 수증기(steam)와 반응하면, 구성성분 중에서 레진류와 아스팔텐류가 감소하고, 포화탄화수소류(saturates)나 방향족탄화수소류(aromatics)가 증가하는 경향을 보였다. 이러한 경향은 수증기(steam)량이 감압잔사유와 동일 중량부 이상으로 과량 사용 시 더 확연하였다. $300^{\circ}C$, 30 bar 이상에서 48 h 반응하는 경우 VR 조성물은 초기상태(S/A/R/A = 7.3%/43.7%/25.6%/23.5%)에서 최종상태(S/A/R/A = 6.8%/57%/12.2%/24.0%)로 레진류의 함량이 전체에서 13% 정도 감소하고 방향족화합물들은 13% 정도 증가하였다. 이때 점도는 880,000 cp에서 290,000 cp로 68% 정도 감소하였다. 수소를 제공하기 쉬운 데칼린(decalin)을 10% 첨가하는 경우 24 h에 점도가 68% 정도 감소하였고, VR 조성물은 초기상태(S/A/R/A = 7.3%/43.7%/25.6%/23.5%)에서 최종상태(S/A/R/A = 4.5%/63.5%/12.5%/20.0%)로 레진류 및 아스팔텐의 함량이 49%에서 17%가 감소하였고, 방향족 화합물의 함량이 63.5%로 극대화되었다. Aquathermolysis 반응으로 형성된 기체층을 포집하여 GC-MS spectroscopy로 분석한 결과 에틸벤젠, 옥탄, 디메틸벤젠 등 다양한 탄화수소 화합물들이 검출됨을 확인하였다.

Keywords

References

  1. R. F. Meyer, E. D. Attanasi, and P. A. Freeman, Heavy Oil and Natural Bitumen Resources in Geological Basins of the World, U.S. Department of Interior & U.S. Geological Survey Open File-Report 2007-1084 (2007).
  2. O. Muraza, Hydrous pyrolysis of heavy oil using solid acid minerals for viscosity reduction, J. Anal. Appl. Pyrolysis, 114, 1-10 (2015). https://doi.org/10.1016/j.jaap.2015.04.005
  3. P. R. Kapadia, M. S. Kallos, and I. D. Gates, A review of pyrolysis, aquathermolysis, and oxidation of Athabasca bitumen, Fuel Process. Technol., 131, 270-289 (2015). https://doi.org/10.1016/j.fuproc.2014.11.027
  4. O. Muraza and A. Galadima, Aquathermolysis of heavy oil: A review and perspective on catalyst development, Fuel, 157, 219-231 (2015). https://doi.org/10.1016/j.fuel.2015.04.065
  5. H. C. Lee and S. K. Park, Upgrading of heavy oil or vacuum residual oil: Aquathermolysis and demetallization, Appl. Chem. Eng., 27, 343-352 (2016). https://doi.org/10.14478/ace.2016.1069
  6. J. B. Hyne, Aquathermolysis of heavy oils In: R. F. Meyer, J. C. Wynn, and J. C. Olson (eds.), The Future of Heavy Crude and Tar Sands: 2nd International Conference, Caracas, Venezuela, 7-17 February 1982, pp. 404-411, McGraw Hill, New York (1984).
  7. A. Bera and T. Babadagli, Status of electromagnetic heating for enhanced heavy oil/bitumen recovery and future prospects: A review, Appl. Energy, 151, 206-226 (2015). https://doi.org/10.1016/j.apenergy.2015.04.031
  8. F. R. Ahmadun, A. Pendashteh, L. C. Abdullah, D. R. A. Biak, S. S. Madaeni, and Z. Z. Abidin, Review of technologies for oil and gas produced water treatment, J. Hazard. Mater., 170, 530-551 (2009). https://doi.org/10.1016/j.jhazmat.2009.05.044
  9. J. Peng, G. Q. Tang, and A. R. Kovscek, Oil chemistry and its impact on heavy oil solution gas drive, J. Pet. Sci. Eng., 66, 47-59 (2009). https://doi.org/10.1016/j.petrol.2009.01.005
  10. F. Zhao, X. Wang, Y. Wang, and Y. Shi, The catalytic aquathermolysis of heavy oil in the presence of a hydrogen donor under reservoirs conditions, J. Chem. Pharm. Res., 6(5), 2037-2041 (2014).
  11. S. K. Maity, J. Ancheyta, and G. Marroquin, Catalytic aquathermolysis used for viscosity reduction of heavy crude oils: A review, Energy Fuels, 24, 2809-2816 (2010). https://doi.org/10.1021/ef100230k
  12. R. C. K. Wong and B. B. Maini, Gas bubble growth in heavy oil-filled sand packs under undrained unloading, J. Pet. Sci. Eng., 55, 259-270 (2007). https://doi.org/10.1016/j.petrol.2006.08.006
  13. J. Wang, Y. Z. Yuan, L. Zhang, and R. Wang, The influence of viscosity on stability of foamy oil in the process of heavy oil solution gas drive, J. Pet. Sci. Eng., 66, 69-74 (2009). https://doi.org/10.1016/j.petrol.2009.01.007
  14. C. Wu, G. L. Lei, C. J. Yao, K, J. Sun, P. Y. Gai, and Y. B. Cao, Mechanism for reducing the viscosity of extra-heavy oil by aquathermolysis with an amphiphilic catalyst, J. Fuel Chem. Technol., 38, 684-690 (2010). https://doi.org/10.1016/S1872-5813(11)60004-2
  15. H. X. Xu and C. S. Pu, Experimental study of heavy oil underground aquathermolysis using catalyst and ultrasonic, J. Fuel. Chem. Technol., 39, 606-610 (2011). https://doi.org/10.1016/S1872-5813(11)60037-6
  16. P. Jing, Q. Li, M. Han, D. Sun, L. Jia, and W. Fang, Effect of $Ni^{2+}$ and $Sn^{2+}$ modified $SO{_4}^{2-}/ZrO_2$ solid super-acid catalysts on visbreaking of heavy petroleum oil, Shiyou Huagong / Petrochem. Technol., 36, 237-241 (2007).
  17. C. Ovalles, P. Rengel-Unda, J. Bruzual, and A. Salazar, Upgrading of extra-heavy crude using hydrogen donor under steam injection conditions. Characterization by pyrolysis GC-MS of the asphaltenes and effects of a radical initiator, Fuel Chem., 48, 59-60 (2003).
  18. C. Ovalles, C. Vallejos, T. Vasquez, I. Rojas, U. Ehrman, J. L. Benitez, and R. Martinez, Downhole upgrading of extra-heavy crude oil using hydrogen donors and methane under steam injection conditions, Pet. Sci. Technol., 21, 255-274 (2003). https://doi.org/10.1081/LFT-120016947
  19. Y. Liu and H. Fan, The effect of hydrogen donor additive on the viscosity of heavy oil during steam stimulation, Energy Fuels, 16, 842-846 (2002). https://doi.org/10.1021/ef010247x
  20. C. Ovalles, P. R. Unda, J. Bruzual, and A. Salazar, Upgrading of extra-heavy crude using hydrogen donor under steam injection conditions: Characterization by pyrolysis GC-MS of the asphaltenes and effects of a radical initiator, Am. Chem. Soc. Div. Fuel. Chem., 48, 59-60 (2003).
  21. J. Li, Y. Chen, H. Liu, P. Wang, and F. Liu, Influences on the aquathermolysis of heavy oil catalyzed by two different catalytic ions: $Cu^{2+}$ and $Fe^{3+}$, Energy Fuels, 27, 2555-2562 (2013). https://doi.org/10.1021/ef400328s
  22. H. Wang, Y. Wu, L. He, and Z. Liu, Supporting tungsten oxide on zirconia by hydrothermal and impregnation methods and its use as a catalyst to reduce the viscosity of heavy crude oil, Energy Fuels, 26, 6518-6527 (2012). https://doi.org/10.1021/ef301064b