참고문헌
- Choi, S. Y., Kwon, D. G., Park, I. S., Wang, D. K., "A study on the optimal conditions for machining accuracy when endmill fillet cutting at the corner," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 101-108, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.101
- Yang, S. H., Lee, Y. M. "Cutting Characteristics Depending on Coolant Level in Turning Process," JOURNAL-KOREAN SOCIETY OF PRECISION ENGINEERING, Vol. 21, No. 1, pp. 80-86, 2004.
- Park, K. B., Cho, Y. T., Chin, D. S., Jung, Y. G., "The Effect of a Sealed Cover and POSS-type Cutting Oil on MQL Drilling," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 77-82, 2016. https://doi.org/10.14775/ksmpe.2016.15.6.077
- Lee, J. M., Yang, Y. J., "Analysis of Cutter and Design of Chip Processing System for Large Scale Machine Tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 147-153, 2012.
- Lee, I. S., Kim, H. J., Kim, D. H., Kim, N. K., "A Study on Simulation of Chip Recycling System for the Management of Cutting Chip in 5-Axis FMS Line," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 6, pp. 175-181, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.175
- Lee, S. H., Kim, J. H., Song, J. Y., "A study on the Antimicrobial Activity of Copper Alloy Metal Fiber on Water Soluble Metal Working Fluids," Journal of The Korean Oil Chemists Society, Vol. 26, No. 1, pp. 69-73, 2009.
- Choe, S. J., "Characteristics of microorganism and variations of the physical properties of waste water-soluble cutting oil by UV-irradiation", A Thesis for master's degree, Kyungpook National University, Republic of Korea, 2005.
- Song, D. E.,"An Experimental Study for the Enhancement of the Performance of a Belt Skimmer," A Thesis for a Doctorate, Dankook University, Republic of Korea, 1997.
- Hwang, J. R., "Machining characteristics of the machining-difficult materials according to cooling method," A Thesis for master's degree, Korea Polytechnic University, Republic of Korea, 2004.
- Kwon, H. H., Cho, D. H., Park, Y. I. "Oil Cooler Design Automation on the Cooling of Machine Tool Cutting Oil," Jorunal of the Korean Society of Machien Tool Engineers, Vol. 8, No. 1, pp. 89-99, 1999.
피인용 문헌
- Inflow Nozzle Conditions for Improving Vortex Tube Performance vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.068
- Structural Safety Evaluation of Heat Exchanger Filter for Cutting Oil Supplying Device of Machine Tool vol.20, pp.4, 2018, https://doi.org/10.17958/ksmt.20.4.201808.427
- A Study on the Cooling Characteristics of Heat Exchanger Filter for Cutting Oil Supplying Device vol.20, pp.4, 2017, https://doi.org/10.17958/ksmt.20.4.201808.439
- A Basic Study on Structural Analysis and Improvement of Pressurized DC (Dust Cake) Filter System Using Hydraulic Cylinder vol.36, pp.2, 2017, https://doi.org/10.7736/kspe.2019.36.2.135