DOI QR코드

DOI QR Code

Optimized design for perforated plates with quasi-square hole by grey wolf optimizer

  • Chaleshtari, Mohammad H. Bayati (Department of Mechanical Engineering, Shahrood University of Technology) ;
  • Jafari, Mohammad (Department of Mechanical Engineering, Shahrood University of Technology)
  • 투고 : 2016.09.24
  • 심사 : 2017.02.24
  • 발행 : 2017.08.10

초록

One major concern that has occupied the mind of the designers is a structural failure as result of stress concentration in the geometrical discontinuities. Understanding the effective parameters contribute to stress concentration and proper selection of these parameters enables the designer get to a reliable design. In the analysis of perforated isotropic and orthotropic plates, the effective parameters on stress distribution around holes include load angle, curvature radius of the corner of the hole, hole orientation and fiber angle for orthotropic materials. This present paper tries to examine the possible effects of these parameters on stress analysis of infinite perforated plates with central quasi-square hole applying grey wolf optimizer (GWO) inspired by the particular leadership hierarchy and hunting behavior of grey wolves in nature, and also the present study tries to introduce general optimum parameters in order to achieve the minimum amount of stress concentration around this type of hole on isotropic and orthotropic plates. The advantages of grey wolf optimizer are stout, flexible, simple, and easy to be enforced. The used analytical solution is the expansion of Lekhnitskii's solution method. Lekhnitskii applied this method for the stress analysis of anisotropic plates containing circular and elliptical holes. Finite element numerical solution is employed to examine the results of present analytical solution. Results represent that by selecting the aforementioned parameters properly, fewer amounts of stress could be achieved around the hole leading to an increase in load-bearing capacity of the structure.

키워드

참고문헌

  1. Asmar, G.H. and Jabbour, T.G. (2007), "Stress analysis of anisotropic plates containing rectangular holes", Int. J. Mech. Sol., 2, 48-59.
  2. Banerjee, M., Jain, N.K. and Sanyal, S. (2013), "Stress concentration in isotropic and orthotropic composite plates with center circular hole subjected to transverse static loading", Int. J. Mech. Ind. Eng., 3, 109-113.
  3. Batista, M. (2011), "On the stress concentration around a hole in an infinite plate subject to a uniform load at infinity", Int. J. Mech. Sci., 53, 254-261. https://doi.org/10.1016/j.ijmecsci.2011.01.006
  4. Derrac, J., Garci, A.S., Molina, D. and Herrera, F. (2011), "A practical tutorial on the use of nonparametric statistical tests as a methodology for comparing evolutionary and swarm intelligence algorithms", Swarm Evolut Comput., 1, 3-18. https://doi.org/10.1016/j.swevo.2011.02.002
  5. Emary, E., Zawbaa, H.M., Grosan, C. and Hassenian, A.E. (2015), "Feature subset selection approach by gray wolf optimizer", Adv. Intell. System. Comput., 334, 1-13.
  6. Holland, J.H. (1992), Adaptation in Natural and Artificial Systems, MIT Press, Cambridge.
  7. Jafari, M. and Rohani, A. (2016), "Optimization of perforated composite plates under tensile stress using genetic algorithm", J Compos Mater., 50, 2773-2781. https://doi.org/10.1177/0021998315612540
  8. Jafari, M., Hoseynia, S.A. and Bayati, M.H. (2016), "Determination of optimal parameters for perforated plates with quasi-triangular cutout by PSO", Struct. Eng. Mech., 60(5), 795-807. https://doi.org/10.12989/sem.2016.60.5.795
  9. Jong, T.D. (1981), "Stresses around rectangular holes in orthotropic plates", J. Compos. Mater., 15, 311-328. https://doi.org/10.1177/002199838101500402
  10. Kennedy, J. and Eberhart, R. (1995), "Particle swarm optimization", Proc. ICNN'95 - Int. Conf. Neural Networks, 4, 1942-8, doi: 10.1109/ICNN.1995.488968.
  11. Lekhnitskii, S.G. (1968), Anisotropic Plates, Gordon and Breach Science, New York.
  12. Louhghalam, A., Igusa, T., Park, C., Choi, S. and Kim, K. (2011), "Analysis of stress concentrations in plates with rectangular openings by a combined conformal mapping-finite element approach", Int. J. Solid. Struct., 48, 1991-2004. https://doi.org/10.1016/j.ijsolstr.2011.03.005
  13. Mirjalili, S. (2015), "How effective is the Grey Wolf Optimizer in training multi-layer perceptrons", Appl. Intell., 43, 150-161. https://doi.org/10.1007/s10489-014-0645-7
  14. Mirjalili, S., Mirjalili, S.M. and Lewis, A. (2014), "Grey Wolf Optimizer", Adv. Eng. Softw., 69, 46-61. https://doi.org/10.1016/j.advengsoft.2013.12.007
  15. Muskhelishvili, N.I. (1954), Some Basic Problems of the Mathematical Theory of Elasticity, Springer Netherlands, Dordrecht.
  16. Myung, J., Jhung, H.J. and Kyeong, H.J. (2016), "Modal characteristics of partially Perforated rectangular Plate with triangular penetration pattern", Struct. Eng. Mech., 55(3), 583-603. https://doi.org/10.12989/SEM.2015.55.3.583
  17. Nageswara Rao, D.K., Ramesh Babu, M., Raja Narender Reddy, K. and Sunil, D. (2010), "Stress around square and rectangular cutouts in symmetric laminates", Compos. Struct., 92, 2845-2859. https://doi.org/10.1016/j.compstruct.2010.04.010
  18. Ratnaweera, A., Halgamuge, S.K. and Watson, H.C. (2004), "Selforganizing hierarchical particle swarm optimizer with timevarying acceleration coefficients", IEEE Tran. Evol. Comput., 8, 240-55. https://doi.org/10.1109/TEVC.2004.826071
  19. Rezaeepazhand, J. and Jafari, M. (2005), "Stress analysis of perforated composite plates", Compos. Struct., 71, 463-468. https://doi.org/10.1016/j.compstruct.2005.09.017
  20. Rezaeepazhand, J. and Jafari, M. (2010), "Stress concentration in metallic plates with special shaped cutout", Int. J. Mech. Sci., 52, 96-102. https://doi.org/10.1016/j.ijmecsci.2009.10.013
  21. Romeo, G. (2001), "Analytical behavior of laminates with rectangular opening under biaxial tension, compression and shear loads", J. Compos. Mater., 35, 639-664. https://doi.org/10.1177/002199801772662037
  22. Sancho, J. and Miravete, A. (2006), "Design of composite structures including delamination studies", Compos. Struct., 76, 283-290. https://doi.org/10.1016/j.compstruct.2004.11.011
  23. Saremi, S., Mirjalili, S.Z. and Mirjalili, S.M. (2015), "Evolutionary population dynamics and grey wolf optimizer", Neural Comput. Appl., 26, 1257-1263. https://doi.org/10.1007/s00521-014-1806-7
  24. Savin, G.N. (1970), Stress Distribution Around Holes, NASA Technical Translation, Pergamon Press, New York.
  25. Sburlati, R. (2013), "Stress concentration factor due to a functionally graded ring around a hole in an isotropic plate", Int. J. Solid. Struct., 50, 3649-3658. https://doi.org/10.1016/j.ijsolstr.2013.07.007
  26. Sivanandam, S.N. and Deepa, S.N. (2008), Introduction to Genetic Algorithms, Springer Berlin Heidelberg, New York.
  27. Song, H.M., Sulaiman, M.H. and Mohamed, M.R. (2014), "Anapplication of grey wolf optimizer for solving combined economic emission dispatch problems", Int. Rev. Model. Simula., 2, 838-844.
  28. Song, X., Tang, L., Zhao, S., Zhang, X., Li, L., Huang, J. and Cai, W. (2015), "Grey wolf optimizer for parameter estimation in surface waves", Soil Dyn. Earthq. Eng., 75, 147-157. https://doi.org/10.1016/j.soildyn.2015.04.004
  29. Timoshenko, S.P. and Goodier, J.N. (1986), Theory of Elasticity, McGraw-Hill, Book Company, New York.
  30. Ukadgaonker, V.G. and Kakhandki, V. (2005), "Stress analysis for an orthotropic plate with an irregular shaped hole for different in-plane loading conditions", Compos. Struct., 70, 255-274. https://doi.org/10.1016/j.compstruct.2004.08.032
  31. Ukadgaonker, V.G. and Rao, D.K.N. (1999), "Stress distribution around triangular holes in anisotropic plates", Compos. Struct., 45, 171-183. https://doi.org/10.1016/S0263-8223(99)00024-0
  32. Ukadgaonker, V.G. and Rao, D.K.N. (2000), "A general solution for moments around holes in symmetric laminates", Compos. Struct., 49, 41-54. https://doi.org/10.1016/S0263-8223(99)00124-5
  33. Vigdergauz, S. (2001), "The effective properties of a perforated elastic plate Numerical optimization by genetic algorithm", Int. J. Solid. Struct., 38, 8593-8616. https://doi.org/10.1016/S0020-7683(01)00189-5
  34. Yang, X., Yuan, J., Yuan, J. and Mao, H. (2007), "A modified particle swarm optimizer with dynamic adaptation", Appl. Math. Comput., 189, 1205-13. https://doi.org/10.1016/j.amc.2006.12.045

피인용 문헌

  1. Effect of stacking sequence on thermal stresses in laminated plates with a quasi-square cutout using the complex variable method vol.77, pp.2, 2021, https://doi.org/10.12989/sem.2021.77.2.245