References
- Alonso, C., Andrade, C., Gonzalez, J.A. (1988). Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement types, Cement and Concrete Research, 18(5), 687-698. https://doi.org/10.1016/0008-8846(88)90091-9
- ASTM C876-09. (2009). Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete, 1-6.
- Baek, S.H., Xue, W., Feng, M.Q., Kwon, S.J. (2012). Nondestructive corrosion detection in RC through integrated heat enduction and IR thermography, Journal of Non Destructive Evaluation, 31(2), 181-190.
- Broomfield, J.P. (1997). Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London, 1-15.
- Elsener, B. (2005). Corrosion rate of steel in concrete-measurements beyond the tafel law, Corrosion Science, 47(12), 3019-3033. https://doi.org/10.1016/j.corsci.2005.06.021
- Elsener, B., Andrade, C., Gulikers, J., Polder, R., Raupach, M. (2003). Hall-cell potential measurements-potential mapping on reinforced concrete structures, Materials and Structures, 36(7), 461-471. https://doi.org/10.1007/BF02481526
- Kim, K.B. (2002). A study on allowable crack width of reinforced concrete flexural beam subjected to corrosive environment, Master's Thesis, Yonsei University, Korea, 35 [in Korean].
- Kim, Y.Y., Kim, J.M., Bang, J.W., Kwon, S.J. (2014). Effect of cover depth, w/c ratio, and crack width on half cell potential in cracked concrete exposed to salt sprayed condition, Construction and Building Materials, 54(15), 636-645. https://doi.org/10.1016/j.conbuildmat.2014.01.009
- Kwon, S.J., Na, U.J., Park, S.S., Jung, S.H. (2009). Service life prediction of concrete wharves with early-aged crack: probabilistic approach for chloride diffusion, Structural Safety, 31(1), 75-83. https://doi.org/10.1016/j.strusafe.2008.03.004
- Kwon, S.J., Park, S.S. (2012). Non destructive technique for steel corrosion detection using heat induction and IR thermography, Journal of the Korea Institute for Structural Maintenance and Inspection, 16(2), 40-48 [in Korean]. https://doi.org/10.11112/jksmi.2012.16.2.040
- Lim, Y.C. (2012). A study on the estimation of moisture condition of concrete by resistivity method, Journal of Korea Architecture Institute, 28(12), 69-76 [in Korean].
- Liu, T., Weyers, R.W. (1998). Modeling the dynamic corrosion process in chloride contaminated concrete structures, Cement and Concrete Research, 28(3), 365-379. https://doi.org/10.1016/S0008-8846(98)00259-2
- Maierhofer, C.H., Arndt, R.,Röllig, M., Rieck, C., Walther, A., Scheel, H., Hillemeier, B. (2006). Application of impulse-thermography for nondestructive assessment of concrete structures, Cement and Concrete Composites, 28(4), 393-401. https://doi.org/10.1016/j.cemconcomp.2006.02.011
- RILEM. (1994). Durability Design of Concrete Structures, Report of RILEM Technical Committee 130-CSL, E&FN, London, 28-52.130-CSL, E&FN, London, 28-52.
- Sakurada, S., Irie, H., Yoshida, Y. (2008). "Development of reinforced concrete corrosion amount presumption method by ultrasonic method," 17th World Conference on Nondestructive Testing, Shanghai, China, 1-6.
- Saraswathy, V., Muralidharan, S., Thangavel, K., Srinivasan, S. (2003a). Influence of activated fly ash on corrosion resistance and strength of concrete, Cement and Concrete Composites, 25(7), 673-680. https://doi.org/10.1016/S0958-9465(02)00068-9
- Saraswathy, V., Muralidharan, S., Srinivasan, S. (2003b). Electrochemical studies on the corrosion performance of activated fly ash blended cements, Materials Engineering, 14(3), 261-283.
- So, H.S. (2006). Environmental influences and assessment of corrosion rate of reinforcing bars using the linear polarization resistance technique, Journal of Korea Architecture Institute, 22(2), 107-114 [in Korean].
- Song, H.W., Lee, C.H., Lee, K.C. (2009). A study on corrosion potential of cracked concrete beam according to corrosion resistance assessment, Journal of the Korea Institute for Structural Maintenance and Inspection, 13(1), 97-105 [in Korean].
- Song, H.W., Saraswathy, V. (2006). Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag-an overview, Journal of Hazardous Materials, 138(2), 226-233. https://doi.org/10.1016/j.jhazmat.2006.07.022