Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

HCP Evaluation Considering Property of Cement Mortar and Steel Corrosion

건조 상태의 시멘트 모르타르 특성과 철근 부식량을 고려한 HCP 평가

  • Ryu, Hwa-Sung (Hanyang Experiment and Consulting, Hanyang University ERICA) ;
  • Yoon, Yong-Sik (Department of Civil Engineering, Hannam University) ;
  • Kwon, Seung-Jun (Department of Civil Engineering, Hannam University)
  • 류화성 ((주)한양E&C) ;
  • 윤용식 (한남대학교 건설시스템공학과) ;
  • 권성준 (한남대학교 건설시스템공학과)
  • Received : 2017.01.09
  • Accepted : 2017.03.21
  • Published : 2017.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

HCP(Half Cell Potential) method has been widely used since it is recognized as a efficient NDT(Non Destructive Technique) for corrosion detection. This work is for an evaluation of relation between corrosion amount and measured HCP in dried condition through ICM(Impressed Current Method) for accelerating corrosion. For the work, cement mortar specimens with three w/c ratios and four cover depths are prepared, and corrosion test based on ICM is performed for 6 hours, 18 hour, and 42 hours with constant 20V of electrical charge, respectively. From the test, corrosion amount increases with reduced cover depth, increasing w/c ratio, and extended corrosion period, where corrosion amount is evaluated to linearly increases with measured HCP in dried condition. In order to evaluate corrosion amount through measured HCP, the measured HCP level is firstly determined and then corrosion amount is to be compared with measured HCP, which is evaluated to be more reasonable with higher C.O.V.

HCP 측정법은 철근부식을 판단하는 비파괴 시험으로 현장에서 효과적으로 사용되고 있다. 본 연구는 실내실험을 통하여 촉진부식실험을 수행하고 건조 상태에서 측정된 HCP 측정값과 부식량의 상관성을 분석하는 연구이다. 이를 위해 4가지 피복두께와 3가지 물-시멘트비를 가진 시멘트 모르타르 시편을 제조하여 6시간, 18시간, 42시간동안 20V의 전압을 가하여 ICM에 의한 촉진실험을 수행하였다. 분석결과 피복두께의 감소, 물-시멘트비의 증가, 촉진부식시간의 증가에 따라 부식량이 증가하였으며, 측정된 HCP 값과는 선형적인 관계를 나타내었다. HCP를 사용하여 부식량을 평가하기 위해서는 전체 부식량을 비교하는 것보다, 일정수준의 HCP 값을 선정하고 이에 따라 부식량을 평가하는 것이 높은 결정계수를 얻는 합리적인 방법으로 평가되었다.

Keywords

References

  1. Alonso, C., Andrade, C., Gonzalez, J.A. (1988). Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement types, Cement and Concrete Research, 18(5), 687-698. https://doi.org/10.1016/0008-8846(88)90091-9
  2. ASTM C876-09. (2009). Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete, 1-6.
  3. Baek, S.H., Xue, W., Feng, M.Q., Kwon, S.J. (2012). Nondestructive corrosion detection in RC through integrated heat enduction and IR thermography, Journal of Non Destructive Evaluation, 31(2), 181-190.
  4. Broomfield, J.P. (1997). Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London, 1-15.
  5. Elsener, B. (2005). Corrosion rate of steel in concrete-measurements beyond the tafel law, Corrosion Science, 47(12), 3019-3033. https://doi.org/10.1016/j.corsci.2005.06.021
  6. Elsener, B., Andrade, C., Gulikers, J., Polder, R., Raupach, M. (2003). Hall-cell potential measurements-potential mapping on reinforced concrete structures, Materials and Structures, 36(7), 461-471. https://doi.org/10.1007/BF02481526
  7. Kim, K.B. (2002). A study on allowable crack width of reinforced concrete flexural beam subjected to corrosive environment, Master's Thesis, Yonsei University, Korea, 35 [in Korean].
  8. Kim, Y.Y., Kim, J.M., Bang, J.W., Kwon, S.J. (2014). Effect of cover depth, w/c ratio, and crack width on half cell potential in cracked concrete exposed to salt sprayed condition, Construction and Building Materials, 54(15), 636-645. https://doi.org/10.1016/j.conbuildmat.2014.01.009
  9. Kwon, S.J., Na, U.J., Park, S.S., Jung, S.H. (2009). Service life prediction of concrete wharves with early-aged crack: probabilistic approach for chloride diffusion, Structural Safety, 31(1), 75-83. https://doi.org/10.1016/j.strusafe.2008.03.004
  10. Kwon, S.J., Park, S.S. (2012). Non destructive technique for steel corrosion detection using heat induction and IR thermography, Journal of the Korea Institute for Structural Maintenance and Inspection, 16(2), 40-48 [in Korean]. https://doi.org/10.11112/jksmi.2012.16.2.040
  11. Lim, Y.C. (2012). A study on the estimation of moisture condition of concrete by resistivity method, Journal of Korea Architecture Institute, 28(12), 69-76 [in Korean].
  12. Liu, T., Weyers, R.W. (1998). Modeling the dynamic corrosion process in chloride contaminated concrete structures, Cement and Concrete Research, 28(3), 365-379. https://doi.org/10.1016/S0008-8846(98)00259-2
  13. Maierhofer, C.H., Arndt, R.,Röllig, M., Rieck, C., Walther, A., Scheel, H., Hillemeier, B. (2006). Application of impulse-thermography for nondestructive assessment of concrete structures, Cement and Concrete Composites, 28(4), 393-401. https://doi.org/10.1016/j.cemconcomp.2006.02.011
  14. RILEM. (1994). Durability Design of Concrete Structures, Report of RILEM Technical Committee 130-CSL, E&FN, London, 28-52.130-CSL, E&FN, London, 28-52.
  15. Sakurada, S., Irie, H., Yoshida, Y. (2008). "Development of reinforced concrete corrosion amount presumption method by ultrasonic method," 17th World Conference on Nondestructive Testing, Shanghai, China, 1-6.
  16. Saraswathy, V., Muralidharan, S., Thangavel, K., Srinivasan, S. (2003a). Influence of activated fly ash on corrosion resistance and strength of concrete, Cement and Concrete Composites, 25(7), 673-680. https://doi.org/10.1016/S0958-9465(02)00068-9
  17. Saraswathy, V., Muralidharan, S., Srinivasan, S. (2003b). Electrochemical studies on the corrosion performance of activated fly ash blended cements, Materials Engineering, 14(3), 261-283.
  18. So, H.S. (2006). Environmental influences and assessment of corrosion rate of reinforcing bars using the linear polarization resistance technique, Journal of Korea Architecture Institute, 22(2), 107-114 [in Korean].
  19. Song, H.W., Lee, C.H., Lee, K.C. (2009). A study on corrosion potential of cracked concrete beam according to corrosion resistance assessment, Journal of the Korea Institute for Structural Maintenance and Inspection, 13(1), 97-105 [in Korean].
  20. Song, H.W., Saraswathy, V. (2006). Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag-an overview, Journal of Hazardous Materials, 138(2), 226-233. https://doi.org/10.1016/j.jhazmat.2006.07.022