DOI QR코드

DOI QR Code

Mechanical Properties of TiN and DLC coated Rod for Pedicle Screw System

TiN 및 DLC 코팅된 척추용 나사못 시스템 Rod의 기계적 특성 분석

  • Kang, Kwan-Su (Medical Device Development Center, OSONG Medical Innovation Foundation) ;
  • Jung, Tae-Gon (Medical Device Development Center, OSONG Medical Innovation Foundation) ;
  • Yang, Jae-Woong (Medical Device Development Center, OSONG Medical Innovation Foundation) ;
  • Woo, Su-Heon (R&D Center, Medyseey Co.) ;
  • Park, Tea-Hyun (R&D Center, Medyseey Co.) ;
  • Jeong, Yong-Hoon (Medical Device Development Center, OSONG Medical Innovation Foundation)
  • 강관수 (오송첨단의료산업진흥재단 첨단의료기기개발지원센터) ;
  • 정태곤 (오송첨단의료산업진흥재단 첨단의료기기개발지원센터) ;
  • 양재웅 (오송첨단의료산업진흥재단 첨단의료기기개발지원센터) ;
  • 우수헌 ((주)메디쎄이 기술연구소) ;
  • 박태현 ((주)메디쎄이 기술연구소) ;
  • 정용훈 (오송첨단의료산업진흥재단 첨단의료기기개발지원센터)
  • Received : 2017.06.26
  • Accepted : 2017.06.28
  • Published : 2017.06.30

Abstract

In this study, surface morphology and mechanical property of TiN and DLC coated pedicle screw have been investigated by field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, vickers hardness test, axial gripping, and axial torsional gripping capacity test. From the EDS and XRD results, the composition and crystal structure of TiN and DLC coated surface were verified. The hardness value was increased by TIN and DLC coating, and the DLC coating surface has the highest value. The gripping capacity also showed higher value for TiN and DLC coated specimen than that of non-coated (Ti alloy) surface. The surface morphology of gripping tested specimen showed rougher scratched surface from Ti alloy than TiN and DLC coated layer.

Keywords

References

  1. S. H. Han, S. J. Hyun, K. J. Kim, Tae-Ahn Jahng, Hyun-Jib Kim, Comparative Study Between Cobalt Chrome and Titanium Alloy Rods for Multilevel Spinal Fusion: Proximal Junctional Kyphosis More Frequently Occurred in Patients Having Cobalt Chrome Rods, world neurosurgery, 103 (2017) 404-409. https://doi.org/10.1016/j.wneu.2017.04.031
  2. J. S. Smith, C. I, Shaffrey, C. P. Ames, J. Demakakos, K. M. Fu, S. Keshavarzi, L. I. CM, V. Deviren, F. J. Schwab, V. Lafage, S. Bess, Assessment of symptomatic rod fracture after posterior instrumented fusion for adult spinal deformity, Neurosurgery, 71 (2012) 862-867. https://doi.org/10.1227/NEU.0b013e3182672aab
  3. K. Holmberg, H. Ronkainen, A. Matthews, Tribology of thin coatings, Ceram. Int., 26 (2000) 787. https://doi.org/10.1016/S0272-8842(00)00015-8
  4. R. Hauert, K. Thorwarth, G. Thorwarth, An overview on diamond-like carbon coatings in medical applications, Surf. Coat. Technol., 233 (2013) 119-130. https://doi.org/10.1016/j.surfcoat.2013.04.015
  5. J. M. KiM, O. W Kwon, K. H. Kim, The physical properties of TiN ion-plated Co-Cr (elgiloy) orthodontic wires, Korea. J. Orthod., 28 (1988) 371-337.
  6. “Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants” ASTM F1798-08
  7. Y. H. Jeong, C. H. Lee, C. H. Chung, M. K. Son, H. C. Choe, Effects of TiN and WC coating on the fatigue characteristics of dental implant, Surf. Coat. Technol., 234 (2014) 71-81.
  8. H. C. Choe, S. Y. Park, M. S. Kim, Porcelain bending strength and mechanical peroperties of sintered Ni-Cr-Ti alloy for dental prosthodontics, J. Korean Inst. Surf. Eng., 49 (2016) 560-566. https://doi.org/10.5695/JKISE.2016.49.6.560
  9. Joint Committee on Powder Diffraction Standard (JCPDS) and International Center for Diffraction Data (ICDD, 44-1294)
  10. Joint Committee on Powder Diffraction Standard (JCPDS) and International Center for Diffraction Data (ICDD, 17-0299)
  11. S. Zhang, H. Xie, X. Zeng, P. Hing, Residual stress characterization of diamond-like carbone coatings by an X-ray diffraction method, Surf. Coat. Technol., 122 (1999) 219-224. https://doi.org/10.1016/S0257-8972(99)00298-4
  12. H. J. Lee, H. S. Choi, M. H. Ahn, J. I. Song, Mechanical characterization of the pedicle screw system for thoracolumbar spine, J. Biomed. Eng. Res., 23 (2002) 17-26.
  13. S. Y. Yoon, Y. B. Lee, K. H. Kim, A comparative study on mechanical properties of TiN and TiAlN films prepared by Arc Ion Plating Technique, J. Kor. Inst. Surf. Eng., 35 (2002) 199-205.
  14. J. C. Jang, S. H. Kim, Characterization of DLC Coated Surface of Fe-3.0%Ni-0.7%Cr-1.4%Mn-X Steel, J. Kor. Inst. Surf. Eng., 47 (2014) 13-19. https://doi.org/10.5695/JKISE.2014.47.1.013
  15. M. Lepicka, M. Gradzka-Dahlke, D. Pieniak, K. Pasierbiewicz, A. Niewczas, Effect of mechanical properties of substrate and coating on wear performance of TiN- or DLC-coated 316LVM stainless steel, Wear, 382-383 (2017) 62-70. https://doi.org/10.1016/j.wear.2017.04.017
  16. P. B. Voleti, F. H. Shen, V. Arlet, Failure of monoaxial pedicle screws at the distal end of scoliosis constructs: a case series, Spine Deform., 2 (2014) 110-121. https://doi.org/10.1016/j.jspd.2013.11.004