References
- R. Ramanauskas, et al., PCB failure analysis related to the ENIG black pad problem, J. circuit world, 39-3 (2013) 124-132.
- P. Snugovsky, et al., Electroless Ni/Immersion Au interconnects: Investigation of black pad in wire bonds and solder joints, J. Electron. Mater. 30 (2001) 1262-1270. https://doi.org/10.1007/s11664-001-0159-z
- Jin Yu, et al., A corrosion couple experiment reproducing the black pad phenomenon found after the electroless nickel immersion gold process, Scripta Mater. 63 (2010) 508-511. https://doi.org/10.1016/j.scriptamat.2010.05.015
- Y.S. Won, et al., The pH effect on black spots in surface finish: Electroless nickel immersion gold, Appl. Surf. Sci. 257 (2010) 56-61. https://doi.org/10.1016/j.apsusc.2010.06.033
- J.W. Yoon, et al., Flip-chip bonding technology and reliability of electronic packaging, J. KWJS, 25-2 (2007) 108-117.
- K.S. Choi, et al., Recent trends of flip chip bonding technology, Electronics and telecommunications trends, 28-5 (2013) 100-110
- R. Beica, Flip chip market and technology trends, EMPC, (2013) 1-4
- J. H. Lee, et al., TSV Interconnection Technology Using Solder Nanoparticles, J. KWJS, 29-3 (2011) 283.
- M. S. Kim, et al., Precise Joining Technology on Flexible Substrate by Using Micro-bumps, J. KWJS, 30-5 (2012) 395.
- C.K. Chung, et al., The critical oxide thickness for Pb-free reflow soldering on Cu substrate, Thin Solid Films 520 (2012) 5346-5352. https://doi.org/10.1016/j.tsf.2012.03.034
- K. Hannigan, et al., Corrosion of RoHS-Compliant surface finishes in corrosive mixed flowing gas environments, J. Electron. Mater. 41 (2012) 611-623. https://doi.org/10.1007/s11664-011-1799-2
- Y. Oda, et al, Study of suitable palladium and gold thickness in ENEPIG deposites for lead free soldering and gold wire bonding, 41st International Symposium microelectronics (2008).
- W.K. Choi, et al, Effect of Ni layer thickness and soldering time on intermetallic compound formation at the interface between molten Sn-3.5Ag and Ni/Cu substrate, J. Electron. Mater. 28 (1999) 1251-1255. https://doi.org/10.1007/s11664-999-0164-1
- M. Ozkok, Direct EP and Direct EPAG - Novel surface finishes for gold-, copper wire bonding and soldering applications, in Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT), 7th International (2012) 178-182.
- Y. Kikukawa, Electroless Pd/Au plating directly on copper, J-STAGE, 66-11 (2015) 511-513.
- C.E. Ho et al, Surface & Coatings Technology, 303, (2016) 103-111. https://doi.org/10.1016/j.surfcoat.2016.03.070
- C.E. Ho, et al., Development and evaluation of direct deposition of Au/Pd(P) bilayers over Cu pads in soldering applications, J. Electron. Mater. 41 (2012) 3276-3283. https://doi.org/10.1007/s11664-012-2200-9
- C.E. Ho, et al., Interfacial reaction and mechanical characterization of Sn-Ag-Cu/Au/Pd(P)/Cu solder joints: thick Pd(P) deposition, J. Electron. Mater. 44 (2015) 568-580. https://doi.org/10.1007/s11664-014-3513-7
- K.H. Lee, Identification and prevention of Black Pad, SMTnet, (2013) 1-13.
- M. Oezkoek, et al., Benefits of pure palladium for ENEP and ENEPIG surface finishes, 3rd ESTC (2010) 1-6.
- C.R. Kao, et al., Amorphous Pd layer as a highly effective oxidation barrier for surface finish of electronic terminals, Corrosion Science, 83, (2014) 419-422. https://doi.org/10.1016/j.corsci.2014.02.006