Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

The Analysis on Properties of Epoxy/MWCNT for Bonding CFRP to Steel Plates

CFRP와 금속 재료의 접합을 위한 epoxy/MWCNT의 특성 분석

  • Received : 2017.03.07
  • Accepted : 2017.06.30
  • Published : 2017.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of a multi walled carbon nanotubes (MWNCT) on the adhesive properties and thermal properties of epoxy were studied by double lap-shear tests. Epoxy/MWCNT resins were prepared from a different amount of the MWCNT incorporated into the epoxy resins (araldite 2011). Steel plates and carbon fiber reinforced plastics (CFRP) were chosen as materials. Mechanical tests were performed by a universal testing machine (UTM). The analysis of thermal properties were conducted by a thermogravimetric analyzer (TGA) and a differential scanning calorimetry (DSC). The fracture surface morphology was examined using a scanning electron microscopy (SEM) and optical microscope. Compared to neat epoxy, it was found that the mechanical properties of epoxy/MWCNT resins are increased.

에폭시 수지의 열적 특성과 접합 특성에 대해 다중벽 탄소 나노 튜브 (MWCNT)의 효과가 이중 중첩 전단시험에 의해 연구되었다. Epoxy/MWCNT 복합 수지는 에폭시 수지(araldite 2011)에 다양한 질량 분율로 MWCNT를 분산하여 제조되었다. MWCNT의 효과를 확인하기 위해 접합강도 시험이 열특성 변형 만능재료시험기에 의해 진행되었고 충격강도 시험이 ASTM D256에 따라 진행되었다. 금속 판재와 탄소섬유강화복합재료가 실험 재료로써 사용되었으며, 열적 안정성 분석은 열 중량 분석기와 시차 주사 열량기에 의해 진행되었다. 또한 접합강도 시험 후 시편의 형태학적 특성은 주사전자현미경에 의해 관찰되었고 파괴거동을 알아보기 위하여 광학현미경을 사용하였다. 에폭시 수지와 비교하였을 때 epoxy/MWCNT 복합 수지가 물리적 특성이 향상되는 것을 나타내었다.

Keywords

References

  1. Lee, J., Kong, C., and Soutis, C., "Experiment Investigation on the Behaviour of CFRP Laminated Composites under Impact and Compression After Impact(CAI)", Composites Research, Vol. 16, No. 4, 2003, pp. 66-73.
  2. Lee, M.S., Kim, H.H., and Kang, C.G., "Effect of Surface Roughness of AL5052/CRP Composites on the Adhesion and Mechanical Properties", Composites research, Vol. 26, No. 5, 2013, pp. 295-302. https://doi.org/10.7234/composres.2013.26.5.295
  3. Sato, C., and Takano, A., "NEDO Project "Automotive Light Weight Structural Elements of CFRP Composites": Joining Technology for Dissimilar Materials", Journal of the Society of Automotive Engineers of Japan, Vol. 61, No. 10, 2007, pp. 40-42.
  4. Dandy, A., "Joining & Fastening: An Overview of Mechanical Joining and Fastening Methods", Sheet Metal Industries, Vol. 75, No. 6, 1998, pp. 12-14.
  5. Budde, L., "Mechanical Joining of Sheet Metal", Eurojoin-conference, Vol. 2, 1994, pp. 903-912.
  6. Neugebauer, R., Mauermann, R., Dietrich, S., and Kraus, C., "Mechanical Joining of Magnesium Alloys with a Heated Anvil as Counter Tool", Magnesium International Conference, Vol. 8, 2010, pp. 1295-1301.
  7. Neugebauer, R., Jesche, F., Kraus, C., and Hensel, S., "Mechanical Joining with Self Piercing Solid-rivets at Elevated Tool Velocities", AIP Conference Proceedings Series, Vol. 1353, No. 2, 2011, pp. 1278-1283.
  8. Ghosh, S.N., and Maiti, S., "An Epoxy-Terminated Structural Adhesive. II. Curing, Adhesive Strength, and Flammability Characteristics", Journal of Applied Polymer Science, Vol. 63, No. 6, 1997, pp. 683-691. https://doi.org/10.1002/(SICI)1097-4628(19970207)63:6<683::AID-APP1>3.0.CO;2-J
  9. Bhuniya, S.P., and Maiti, S., "Heterocyclic Based Epoxy Terminated Structural Adhesive II. Curing, Adhesive Strength and Thermal Stability", Journal of Polymer Materials, Vol. 19, No. 14, 2002, pp. 395-402.
  10. Kim, M., Okoli, O.I., Jack, D., Park, Y.B., and Liang, Z.Y., "Characterisation and Modelling of CNT-epoxy and CNTFibre-epoxy Composites", Plastics, Rubber and Composites, Vol. 40, No. 10, 2011, pp. 481-490. https://doi.org/10.1179/1743289811Y.0000000003
  11. Sangermano, M., Pinneri, S., Calza, P., and Paganini, C., "Photocatalytic Activity of Epoxy/CNT Nanocomposite Films", Macromolecular Materials & Engineering, Vol. 297, No. 4, 2012, pp. 353-358. https://doi.org/10.1002/mame.201100187
  12. Grabowski, K., Zbyrad, P., and Uhl, T., "Development of the Strain Sensors Based on CNT/Epoxy Using Screen Printing", Key Engineering Materials, Vol. 588, 2014, pp. 84-90.
  13. Kwon, Y., "Anisotropic Thermal Conductive MWCNT/Polymer Composites Prepared with an Immiscible PS", Journal of Nanoscience and Nanotechnology, Vol. 14, No. 8, 2014, pp. 6146-6149. https://doi.org/10.1166/jnn.2014.8457
  14. Wienecke, M., Bunescu, M.C., Deistung, K., Fedtke, P., and Borchartd, E., "MWCNT Coatings Obtained by Thermal CVD Using Ethanol Decomposition", Carbon, Vol. 44, No. 4, 2006, pp. 718-723. https://doi.org/10.1016/j.carbon.2005.09.020
  15. Seyhan, A.T., de la Vega, A., Tanoglu, M., and Schulte, K., "Thermal Curing Behavior of MWCNT Modified Vinyl Esterpolyester Resin Suspensions Prepared with 3-roll Milling Technique", Journal of Polymer Science. Part B, Polymer Physics, Vol. 47, No. 15, 2009, pp. 1511-1522. https://doi.org/10.1002/polb.21755
  16. Chen, X., He, G., Du, J., Pei, S., and Guo, J., "Investigation on the Thermal Conductivity of HDPE/MWCNT Composites by Laser Pulse Method", Science China Technological Sciences, Vol. 52, No. 9, 2009, pp. 2767-2772. https://doi.org/10.1007/s11431-009-0133-1
  17. Schaeffer, S.L., Johnson, R.L., and Lewis, W.B., "Impact Force Comparison of Polymers: Molded-Notch Versus Cut-Notch Using the ASTM D 256 Izod Impact Test Method", Journal of Testing and Evaluation, Vol. 26, No. 2, 1998, pp. 151-156. https://doi.org/10.1520/JTE11986J
  18. Das, V., Pandey, A.K., and Krishna, B., "Low Temperature Izod Impact Studies of Blends Based on Impact Grade Polypropylene and Ethylene-alpha-Octene Copolymer", Journal of Rein-forced Plastics and Composites, Vol. 28, No. 23, 2009, pp. 2879-2888. https://doi.org/10.1177/0731684408094058
  19. Park, Y., Lyu, M.Y., and Paul, D.R., "Computer Simulation of Izod Impact Test for Impact Modifier Reinforced Nylon6", Elastomers and Composites, Vol. 48, No. 2, 2013, pp. 172-179. https://doi.org/10.7473/EC.2013.48.2.172
  20. Margem, J., Margem, F., Margem, M., Gomes, V., and Monteiro, S., "Izod Impact Tests in Polyester Matrix Composites Reinforced with Malva Fibers", TMS Annual Meeting and Exhibition Supplemental Proceedings, Vol. 143, 2014, pp. 417-424.
  21. Mustata, F.R., Tudorachi, N., and Bicu, I., "Epoxy Resins Cross- Linked with Bisphenol A/Methylenedianiline Novolac Resin Type: Curing and Thermal Behavior Study", Industrial & Engineering Chemistry Research, Vol. 51, No. 25, 2012, pp. 8415-8424. https://doi.org/10.1021/ie202909s
  22. Mustata, F.R., and Tudorachi, N., "Epoxy Resins Cross-Linked with Rosin Adduct Derivatives. Cross-Linking and Thermal Behaviors", Industrial & Engineering Chemistry Research, Vol. 49, No. 24, 2010, pp. 12414-12422. https://doi.org/10.1021/ie101746v