References
- Zhang, L., Bai, Y., Chen, W., Ding, F., and Fang, H., "Thermal Performance of Modular GFRP Multicellular Structures Assembled with Fire Resistant Panels," Composite Structures, Vol. 172, 2017, pp. 22-33. https://doi.org/10.1016/j.compstruct.2017.03.076
- Ascione, F., Lamberti, M., Razaqpur, A.G., and Spadea, S., "Strength and Stiffness of Adhesively Bonded GFRP Beam-column Moment Resisting Connections," Composite Structures, Vol. 160, 2017, pp. 1248-1257. https://doi.org/10.1016/j.compstruct.2016.11.021
- Yun, Y.M., Seo, M.W., Koo, G.H., Ra, H.W., Yoon, S.J., and Kim, Y.K., "Pyrolysis Characteristics of GFRP (Glass Fiber Reinforced Plastic) under Non-isothermal Conditions," Fuel, vol. 137, 2014, pp. 321-327. https://doi.org/10.1016/j.fuel.2014.08.001
- Davima, J.P., Reisa, P., and Antonio, C.C., "Experimental Study of Drilling Glass Fiber Reinforced Plastics (GFRP) Manufactured by Hand Lay-up," Composites Science and Technology, Vol. 64, 2004, pp. 289-297. https://doi.org/10.1016/S0266-3538(03)00253-7
- Chang, W., and Kikuchi, N., "Analysis of Non-isothermal Mold Filling Molding (RTM) and Structural Reaction," Computational Mechanics, Vol. 16, 1995, pp. 22-35. https://doi.org/10.1007/BF00369882
- Bayldon, J.M., and Daniel, I.M., "Flow Modeling of the VARTM Process Including Progressive Saturation Effects," Composites: Part A, Vol. 40, 2009, pp. 1044-1052. https://doi.org/10.1016/j.compositesa.2009.04.008
- Naik, N.K., Sirisha, M., and Inani, A., "Permeability Characterization of Polymer Matrices Composites by RTM/VARTM," Progress in Aerospace Sciences, Vol. 65, 2014, pp. 22-40. https://doi.org/10.1016/j.paerosci.2013.09.002
- Poodts, E., Minak, G., Mazzocchetti, L., and Giorgini, L., "Fabrication, Process Simulation and Testing of a Thick CFRP Component using the RTM Process," Composites: Part B, Vol. 56, 2014, pp. 673-680. https://doi.org/10.1016/j.compositesb.2013.08.088
- Grujicic, M., Chittajallu, K.M., and Walsh, S., "Non-isothermal Preform Infiltration during the Vacuum-assisted Resin Transfer Molding (VARTM) Process," Applied Surface Science, Vol. 245, 2005, pp. 51-64. https://doi.org/10.1016/j.apsusc.2004.09.123
- Bender, D., Schuster, J., and Heider, D., "Flow Rate Control during Vacuum-assisted Resin Transfer Molding (VARTM) Processing," Composites Science and Technology, Vol. 66, 2006, pp. 2265-2271. https://doi.org/10.1016/j.compscitech.2005.12.008
- Kim, P.J., and Lee, D.G., "Surface Quality and Shrinkage of the Composite Bus Housing Panel Manufactured by RTM," Composite Structures, Vol. 57, 2002, pp. 211-220. https://doi.org/10.1016/S0263-8223(02)00068-5
- Kwon, D.-J., Shin, P.-S., Kim, J.-H., Wang, Z.-J., DeVries, K.L., and Park, J.-M., "Detection of Damage in Cylindrical Parts of Carbon Fiber/epoxy Composites Using Electrical Resistance (ER) Measurements," Composites Part B, Vol. 99, 2016, pp. 528-532. https://doi.org/10.1016/j.compositesb.2016.06.050
- Shin, P.-S., Wang, Z.-J., Kwon, D.-J., Choi, J.-Y., Sung, I., Jin, D.-S., Kang, S.-W., Kim, J.-C., DeVries, K.L., and Park, J.-M., "Optimum Mixing Ratio of Epoxy for Glass Fiber Reinforced Composites with High Thermal Stability," Composites Part B, Vol. 79, 2015, pp. 132-137. https://doi.org/10.1016/j.compositesb.2015.04.032
- Wang, Z.-J., Kwon, D.-J., Choi, J.-Y., Shin, P.-S., Yi, J.-W., Byun, J.-H., Lee, H.-I., Park, J.-K., DeVries, K.L., and Park, J.-M., "Inherent and Interfacial Evaluations of Carbon Nanotubes/epoxy Composites and Single Carbon Fiber at Different Temperatures," Composites Part B, Vol. 91, 2016, pp. 111-118. https://doi.org/10.1016/j.compositesb.2015.12.036
- Ravey, C., Ruiz, E., and Trochu, F., "Determination of the Optimal Impregnation Velocity in Resin Transfer Molding by Capillary Rise Experiments and Infrared Thermography," Composites Science and Technology, Vol. 99, 2014, pp. 96-102. https://doi.org/10.1016/j.compscitech.2014.05.019