DOI QR코드

DOI QR Code

Pinching Analysis of RC Walls by Fiber Model

파이버모델을 이용한 RC벽체의 핀칭해석

  • Yoo, Seok-Hyung (Department of Architectural Engineering, Gyeongnam National University of Science and Technology)
  • 유석형 (경남과학기술대학교 건축공학과)
  • Received : 2017.02.01
  • Accepted : 2017.06.07
  • Published : 2017.06.30

Abstract

It is important to estimate directly the pinching of RC members subjected to cyclic loading. However, in practice the energy dissipation factor is adopted, which is indirect and empirical method. It was reported that the delay of compressive stress development of concrete is the main cause of pinching. In this study the compressive stress delay of concrete is considered in the nonlinear analysis of RC walls subjected to cyclic loading and the effect of the compressive stress delay of concrete on pinching is observed at the hysteresis loop of lateral load-drift ratio graph. Multiple pushover analysis on the RC walls with various vertical end bar ratios were performed by Perform 3D. As results the plastic hinge rotation of RC walls considering the delay of compressive stress development of concrete is evaluated larger than that of walls non-considering stress delay and as the end bar ratio increases the RC walls considering the compressive stress delay of concrete were evaluated differently comparing to the RC walls non-considering compressive stress delay of concrete.

Keywords

Acknowledgement

Supported by : 경남과학기술대학교

References

  1. American Society of Civil Engineers (2000). Prestandard and commentary for the seismic rehabilitation of buildings. FEMA 356, Federal Emergency Management Agency, Washington, D. C.
  2. Applied Technology Council (1996). Seismic Evaluation and Retrofit of Concrete Buildings. ATC-40, Redwood City, California.
  3. Architectural Institute of Korea (2015). Guidelines for performance-Based Seismic Design of Residential Buildings. AIK.
  4. Architectural Institute of Korea (2016). Korean Building Code. AIK.
  5. Computers & Structures INC. (2011). Components and Elements for PERFORM-3D and PERFORM-COLLAPSE. Ver. 5, CSI.
  6. Eom, T., & Park, H. (2002). Simplified Method for Estimating Energy-Dissipation Capacity of Flexure-Dominant RC Members. Journal of the Korea Concrete Institute, 14(4), 566-577. https://doi.org/10.4334/JKCI.2002.14.4.566
  7. Eom, T., & Park, H. (2002). Equations for Estimating Energy Dissipation Capacity of Flexure-dominated RC Members. Journal of the Korea Concrete Institute, 14(6), 989-1000. https://doi.org/10.4334/JKCI.2002.14.6.989
  8. Eom, T., & Park, H. (2003). Pinching and Energy Dissipation Capacity of Flexure-Dominated RC Members. Journal of the Korea Concrete Institute, 15(4), 594-605. https://doi.org/10.4334/JKCI.2003.15.4.594
  9. Jiangtao Y., Kequan Y., Xingyan S., & Zhoudao L. (2016). New Extended Finite Element Method for Pinching Effect in Reinforced Concrete Columns. ACI Structural journal, 113(4), 689-699.
  10. R. Park & T. Paulay (1974). Reinforced Concrete Structures. John Wiley & Sons, 263.