DOI QR코드

DOI QR Code

Determination of earthquake safety of RC frame structures using an energy-based approach

  • Merter, Onur (Department of Civil Engineering, Dokuz Eylul University) ;
  • Ucar, Taner (Department of Architecture, Dokuz Eylul University) ;
  • Duzgun, Mustafa (Department of Civil Engineering, Dokuz Eylul University)
  • 투고 : 2016.01.06
  • 심사 : 2017.02.25
  • 발행 : 2017.06.25

초록

An energy-based approach for determining earthquake safety of reinforced concrete frame structures is presented. The developed approach is based on comparison of plastic energy capacities of the structures with plastic energy demands obtained for selected earthquake records. Plastic energy capacities of the selected reinforced concrete frames are determined graphically by analyzing plastic hinge regions with the developed equations. Seven earthquake records are chosen to perform the nonlinear time history analyses. Earthquake plastic energy demands are determined from nonlinear time history analyses and hysteretic behavior of earthquakes is converted to monotonic behavior by using nonlinear moment-rotation relations of plastic hinges and plastic axial deformations in columns. Earthquake safety of selected reinforced concrete frames is assessed by using plastic energy capacity graphs and earthquake plastic energy demands. The plastic energy dissipation capacities of the frame structures are examined whether these capacities can withstand the plastic energy demands for selected earthquakes or not. The displacements correspond to the mean plastic energy demands are obtained quite close to the displacements determined by using the procedures given in different seismic design codes.

키워드

참고문헌

  1. Acun, B. (2010), "Energy based seismic performance assessment of reinforced concrete columns", Ph.D. Dissertation, Middle East Technical University, Ankara, Turkey.
  2. Acun, B. and Sucuoglu, H. (2012), "Energy dissipation capacity of reinforced concrete columns under cyclic displacements", ACI Struct. J., 109(4), 531-540.
  3. Akbas, B. and Shen, J. (2003), "Earthquake resistant design and energy concepts", Tech. J.-Digest, 14(2), 865-888.
  4. Akbas, B., Shen, J. and Hao, A.H. (2001), "Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective", Struct. Des. Tall Build., 10(3), 193-217. https://doi.org/10.1002/tal.172
  5. Akkar, S.D. and Miranda, E. (2005), "Statistical evaluation of approximate methods for estimating maximum deformation demands on existing structures", J. Struct. Eng., 131(1), 160-172. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:1(160)
  6. ASCE (2007), ASCE/SEI 41-06: Seismic Rehabilitation of Existing Buildings, American Society of Civil Engineers, Reston, Virginia, U.S.A.
  7. ATC 40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, Washington, U.S.A.
  8. Aydinoglu, M.N. (2003), "An incremental response spectrum analysis procedure based on inelastic spectral displacements for multi-mode seismic performance evaluation", Bull. Earthq. Eng., 1(1), 3-36. https://doi.org/10.1023/A:1024853326383
  9. Bertero, V.V. and Gilmore, A.T. (1994), Use of Energy Concepts in Earthquake Resistant Analysis and Design: Issues and Future Directions, Advances in Earthquake Engineering Practice, Short Course in Structural Engineering, Architectural and Economic Issues, University of California, Berkeley, U.S.A.
  10. Cao, V.V., Ronagh, H.R. and Baji, H. (2014), "Seismic risk assessment of deficient reinforced concrete frames in near-fault regions", Adv. Concrete Constr., 2(4), 261-280. https://doi.org/10.12989/acc.2014.2.4.261
  11. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
  12. Clough, R.W. (1996), Effects of Stiffness Degradation on Earthquake Ductility Requirement, University of California, Berkeley, U.S.A.
  13. Computers and Structures Inc (2011), SAP2000: Integrated Structural Analysis and Design Software, CSI, Version 15.1.0, Berkeley, U.S.A.
  14. EC 8 (2004), Eurocode 8: Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  15. ElAssaly, M. (2013), "Towards seismic vulnerability assessment of the building stock in Egypt", Arab. J. Sci. Eng., 38(11), 2953-2969. https://doi.org/10.1007/s13369-012-0467-z
  16. Eom, T.S. and Park, H.G. (2010), "Evaluation of energy dissipation of slender reinforced concrete members and its applications", Eng. Struct., 32(9), 2884-2893. https://doi.org/10.1016/j.engstruct.2010.05.007
  17. Eom, T.S., Park, H.G. and Kang, S.M. (2009), "Energy based cyclic force displacement relationship for reinforced concrete short coupling beams", Eng. Struct., 31(9), 2020-2031. https://doi.org/10.1016/j.engstruct.2009.03.008
  18. Fajfar, P. (2000), "A nonlinear analysis method for performance-based seismic design", Earthq. Spec., 16(3), 573-592. https://doi.org/10.1193/1.1586128
  19. Fajfar, P. and Fischinger, M. (1988), "N2-A method for non-linear seismic analysis of regular buildings", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, Kyoto, Japan, August.
  20. Fajfar, P. and Gaspersic, P. (1996), "The N2 method for seismic damage analysis of RC buildings", Earthq. Eng. Struct. Dyn., 25(1), 31-46. https://doi.org/10.1002/(SICI)1096-9845(199601)25:1<31::AID-EQE534>3.0.CO;2-V
  21. Fajfar, P., Marusic, D. and Perus, I. (2005), "Torsional effects in the pushover-based seismic analysis of buildings", J. Earthq. Eng., 9(6), 831-854. https://doi.org/10.1080/13632460509350568
  22. FEMA 273 (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, U.S.A.
  23. FEMA 356 (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, U.S.A.
  24. FEMA 440 (2005), Improvement of Nonlinear Static Seismic Analysis Procedures, Federal Emergency Management Agency, Washington, U.S.A.
  25. Freeman, S.A. (1998), "Development and use of capacity spectrum method", Proceedings of the 6th U.S. National Conference on Earthquake Engineering, Seattle, Washington, U.S.A., May.
  26. Freeman, S.A., Nicoletti, J.P. and Tyrell, J.V. (1975), "Evaluations of existing buildings for seismic risk-a case study of puget sound naval shipyard, Bremerton, Washington", Proceedings of the U.S. National Conference on Earthquake Engineering, Ann Arbor, Michigan, U.S.A., June.
  27. Goel, R.K. (2008), "Evaluation of current nonlinear static procedures for reinforced concrete buildings", Proceedings of the 14th World Conference on Earthquake Engineering, Bejing, China, October.
  28. Gupta, B. and Kunnath, S.K. (2000), "Adaptive spectra-based pushover procedure for seismic evaluation of structures", Earthq. Spec., 16(2), 367-391. https://doi.org/10.1193/1.1586117
  29. Habibi, A., Chan, W.K. and Albermani, F. (2013), "Energy-based design method for seismic retrofitting with passive energy dissipation systems", Eng. Struct., 46, 77-86. https://doi.org/10.1016/j.engstruct.2012.07.011
  30. Hakim, R.A., Alama, M.S. and Ashour, S.A. (2014), "Seismic assessment of RC building according to ATC 40, FEMA 356 and FEMA 440", Arab. J. Sci. Eng., 39(11), 7691-7699. https://doi.org/10.1007/s13369-014-1395-x
  31. Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference on Earthquake Engineering, Berkeley, California, U.S.A., June.
  32. Lee, S.S. and Goel, S.C. (2001), Performance Based Design of Steel Moment Frames Using Target Drift and Yield Mechanism, Research Report UMCEE 01-17, Department of Civil and Environmental Engineering, University of Michigan, U.S.A.
  33. Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energy based seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1046)
  34. Leelataviwat, S., Saewon, W. and Goel, S.C. (2008), "An energy based method for seismic evaluation of structures", Proceedings of the 14th World Conference on Earthquake Engineering, Bejing, China, October.
  35. Liao, W.C. and Ve Goel, S.C. (2012), "Performance-based plastic design and energy based evaluation of seismic resistant RC moment frame", J. Mar. Sci. Technol., 20(3), 304-310.
  36. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Div., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  37. Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. Dyn., 30(4), 485-499. https://doi.org/10.1002/eqe.17
  38. Neville, A. (1996), Properties of Concrete, John Wiley & Sons, New York, U.S.A.
  39. Park, H.G. and Eom, T.S. (2006), "A simplified method for estimating the amount of energy dissipated by flexure dominated reinforced concrete members for moderate cyclic deformations", Earthq. Spec., 22(3), 459-490. https://doi.org/10.1193/1.2197547
  40. PEER Strong Ground Motion Database (2015), http://ngawest2.berkeley.edu/
  41. Shen, J. and Akbas, B. (1999), "Seismic energy demand in steel moment frames", J. Earthq. Eng., 3(4), 519-559. https://doi.org/10.1080/13632469909350358
  42. Sucuoglu, H. and Erberik, A. (2004), "Energy-based hysteresis and damage models for deteriorating systems", Earthq. Eng. Struct. Dyn., 33(1), 69-88. https://doi.org/10.1002/eqe.338
  43. Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970), "Reinforced concrete response to simulated earthquakes", J. Struct. Div., 96(12), 2557-2573.
  44. Terapathana, S. (2012), "An energy method for earthquake resistant design of RC structures", Ph.D. Dissertation, University of Southern California, Los Angeles, U.S.A.
  45. TSDC (2007), Turkish Seismic Design Code, Ministry of Public Works and Settlement, Ankara, Turkey.
  46. Uang, C.M. and Bertero, V.V. (1988), Use of Energy as a Design Criterion in Earthquake Resistant Design, Report No. UCB/EERC-88/18, Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
  47. Vision 2000 (1995), Performance Based Seismic Engineering of Buildings, Structural Engineers Association of California, Sacramento, California, U.S.A.
  48. Yang, Y., Liu, R., Xue, Y. and Li, H. (2017), "Experimental study on seismic performance of reinforced concrete frames retrofitted with eccentric buckling-restrained braces (BRBs)", Earthq. Struct., 12(1), 79-89. https://doi.org/10.12989/eas.2017.12.1.079

피인용 문헌

  1. Artificial Ground Motions and Nonlinear Response of RC Structures vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/8849623