DOI QR코드

DOI QR Code

Nonlinear stability of non-axisymmetric functionally graded reinforced nano composite microplates

  • Loghman, Abbas (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Arani, Ali Ghorbanpour (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Barzoki, Ali Akbar Mosallaie (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan)
  • 투고 : 2016.10.22
  • 심사 : 2017.02.17
  • 발행 : 2017.06.25

초록

The nonlinear buckling response of nano composite anti-symmetric functionally graded polymeric microplate reinforced by single-walled carbon nanotubes (SWCNTs) rested on orthotropic elastomeric foundation with temperature dependent properties is investigated. For the carbon-nanotube reinforced composite (CNTRC) microplate, a uniform distribution (UD) and four types of functionally graded (FG) distribution are considered. Based on orthotropic Mindlin plate theory, von Karman geometric nonlinearity and Hamilton's principle, the governing equations are derived. Generalized differential quadrature method (GDQM) is employed to calculate the non-linear buckling response of the plate. Effects of FG distribution type, elastomeric foundation, aspect ratio (thickness to width ratio), boundary condition, orientation of foundation orthotropy and temperature are considered. The results are validated. It is found that the critical buckling load without elastic medium is significantly lower than considering Winkler and Pasternak medium.

키워드

참고문헌

  1. Akhavan, H., Hosseini Hashemi, S., Rokni Damavandi Taher, H., Alibeigloo, A. and Vahabi, S. (2009), "Exact solutions for rectangular mindlin plates under in-plane loads resting on Pasternak elastic foundation, part II: Frequency analysis", Comput. Mater. Sci., 44(3), 951-961. https://doi.org/10.1016/j.commatsci.2008.07.001
  2. Baltacioglu, A.K., Civalek, O., Akgoz, B. and Demir, F. (2011), "Large deflection analysis of laminated composite plates resting on nonlinear elastic foundations by the method of discrete singular convolution", J. Press. Vessel. Pip., 88(8), 290-300. https://doi.org/10.1016/j.ijpvp.2011.06.004
  3. Esawi, A.M.K. and Farag, M.M. (2007), "Carbon nanotube reinforced composites: Potential and current challenges", Mater. Des., 28(9), 2394-2401. https://doi.org/10.1016/j.matdes.2006.09.022
  4. Ferreira, A.J.M., Roque, C.M.C. and Martins, P.A.L.S. (2003), "Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method", Compos. Part B, 34(7), 627-636. https://doi.org/10.1016/S1359-8368(03)00083-0
  5. Fiedler, B., Gojny, F.H., Wichmann, M.H.G., Nolte, M.C.M. and Schulte, K. (2006), "Fundamental aspects of nano-reinforced composites", Compos. Sci. Technol., 66(16), 3115-3125. https://doi.org/10.1016/j.compscitech.2005.01.014
  6. Fiorenzo, A.F. (2015), "Natural frequencies and critical temperatures of functionally graded sandwich plates subjected to uniform and non-uniform temperature distributions", Compos. Struct., 121, 197-210. https://doi.org/10.1016/j.compstruct.2014.10.039
  7. Ghorbanpour Arani, A., Kolahchi, R. and Mosallaie Barzoki, A.A. (2011), "Effect of material in-homogeneity on electro-thermo-mechanical behaviors of functionally graded piezoelectric rotating shaft", Appl. Math. Model., 35(6), 2771-2789. https://doi.org/10.1016/j.apm.2010.11.076
  8. Ghorbanpour Arani, A., Kolahchi, R., Mosallaie Barzoki, A.A. and Loghman, A. (2012a), "Electro-thermo-mechanical behaviors of FGPM spheres using analytical method and ANSYS software", Appl. Math. Model., 36(1), 139-157. https://doi.org/10.1016/j.apm.2011.05.031
  9. Ghorbanpour Arani, A., Kolahchi, R., Mosallaie Barzoki, A.A., Mozdianfard, M.R. and Noudeh Farahani, M. (2012b), "Elastic foundation effect on nonlinear thermo-vibration of embedded double-layered orthotropic grapheme sheets using differential quadrature method", J. Mech. Eng. Sci., 227(4), 862-879.
  10. Ghorbanpour Arani, A., Mosallaie Barzoki, A.A. and Kolahchi, R. (2014), "Nonlinear dynamic buckling of viscous-fluid-conveying PNC cylindrical shells with core resting on visco-Pasternak medium", J. Sol. Mech., 6(3), 265-277.
  11. Groh, R.M.J. and Weaver, P.M. (2014), "Buckling analysis of variable angle tow variable thickness panels with transverse shear effects", Compos. Struct., 107, 482-493. https://doi.org/10.1016/j.compstruct.2013.08.025
  12. Huu-Tai, T. and Thuc, P.V. (2013), "A new sinusoidal shear deformation theory for bending, buckling and vibration of functionally graded plates", Appl. Math. Model., 37(5), 3269-3281. https://doi.org/10.1016/j.apm.2012.08.008
  13. Jafari Mehrabadi, S., Sobhani Aragh, B., Khoshkhahesh, V. and Taherpour, A. (2012), "Mechanical buckling of nanocomposite rectangular plate reinforced by aligned and straight single-walled carbon nanotubes", Compos. Part B: Eng., 43(4), 2031-2040. https://doi.org/10.1016/j.compositesb.2012.01.067
  14. Kiani, Y. and Eslami, M.R. (2013), "An exact solution for thermal buckling of annular FGM plates on an elastic medium", Compos. Part B, 45(1), 101-110. https://doi.org/10.1016/j.compositesb.2012.09.034
  15. Kutlu, A. and Omurtag, M.H. (2012), "Large deflection bending analysis of elliptic plates on orthotropic elastic foundation with mixed finite element method", J. Mech. Sci., 65(1), 64-74. https://doi.org/10.1016/j.ijmecsci.2012.09.004
  16. Lee, Y.Y., Zhao, X. and Reddy, J.N. (2010), "Postbuckling analysis of functionally graded plates subject to compressive and thermal loads", Comput. Meth. Appl. Mech. Eng., 199(25), 1645-1653. https://doi.org/10.1016/j.cma.2010.01.008
  17. Lei, Z.X., Liew, K.M. and Yu, J.L. (2013), "Buckling analysis of functionally graded carbon nanotube-reinforced composite plates using the element-free kp-ritz method", Compos. Struct., 98, 160-168. https://doi.org/10.1016/j.compstruct.2012.11.006
  18. Morozov, N.F. and Tovstik, P.E. (2010), "On modes of buckling for a plate on an elastic foundation", Mech. Sol., 45(4), 519-528. https://doi.org/10.3103/S0025654410040035
  19. Mosallaie Barzoki, A.A., Ghorbanpour Arani, A., Kolahchi, R. and Mozdianfard, M.R. (2012), "Electro-thermo-mechanical torsional buckling of a piezoelectric polymeric cylindrical shell reinforced by DWBNNTs with an elastic core", Appl. Math. Model., 36(7), 2983-2995. https://doi.org/10.1016/j.apm.2011.09.093
  20. Mosallaie Barzoki, A.A., Ghorbanpour Arani, A., Kolahchi, R., Mozdianfard, M.R. and Loghman, A. (2013), "Nonlinear buckling response of embedded piezoelectric cylindrical shell reinforced with BNNT under electro-thermo-mechanical loadings using HDQM", Compos. Part B, 44(1), 722-727. https://doi.org/10.1016/j.compositesb.2012.01.052
  21. Mosallaie Barzoki, A.A., Loghman, A. and Ghorbanpour Arani, A. (2015), "Temperature-dependent nonlocal nonlinear buckling analysis of functionally graded SWCNT-reinforced microplates embedded in an orthotropic elastomeric medium", Struct. Eng. Mech., 53(3), 497-517. https://doi.org/10.12989/sem.2015.53.3.497
  22. Ovesy, H.R., Totounferoush, A. and Ghannadpour, S.A.M. (2015), "Dynamic buckling analysis of delaminated composite plates using semi-analytical finite strip method", J. Sound Vibr., 343(12), 131-143. https://doi.org/10.1016/j.jsv.2015.01.003
  23. Piovan, M.T., Domini, S. and Ramirez, J.M. (2012), "In-plane and out-of-plane dynamics and buckling of functionally graded circular curved beams", Compos. Struct., 94(11), 3194-3206. https://doi.org/10.1016/j.compstruct.2012.04.032
  24. Reddy, J.N. (1984), "A simple higher order theory for laminated composite plates", J. Appl. Mech., 51(4), 745-752. https://doi.org/10.1115/1.3167719
  25. Salvetat-Delmotte, J.P. and Rubio, A. (2002), "Mechanical properties of carbon nanotubes: A fiber digest for beginners", Carbon, 40(10), 1729-1734. https://doi.org/10.1016/S0008-6223(02)00012-X
  26. Sepahi, O., Forouzan, M.R. and Malekzadeh, P. (2010), "Large deflection analysis of thermo-mechanical loaded annular FGM plates on nonlinear elastic foundation via DQM", Compos. Struct., 92(10), 2369-2378. https://doi.org/10.1016/j.compstruct.2010.03.011
  27. Shen, H.S. (2009), "Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments", Compos. Struct., 91(1), 9-19. https://doi.org/10.1016/j.compstruct.2009.04.026
  28. Shen, H.S. and Zhang, C.L. (2011), "Nonlocal beam model for nonlinear analysis of carbon nanotubes on elastomeric substrates", Comput. Mater. Sci., 50(3), 1022-1029. https://doi.org/10.1016/j.commatsci.2010.10.042
  29. Shu, C. (1999), Differential Quadrature and Its Application in Engineering, Springer.
  30. Swaminathan, K. and Ragounadin, D. (2004), "Analytical solutions using a higher-order refined theory for the static analysis of antisymmetric angle-ply composite and sandwich plates", Compos. Struct., 64(3), 405-417. https://doi.org/10.1016/j.compstruct.2003.09.042

피인용 문헌

  1. Non-local orthotropic elastic shell model for vibration analysis of protein microtubules vol.25, pp.3, 2017, https://doi.org/10.12989/cac.2020.25.3.245
  2. Strength performance with buckling analysis of Intermediate filaments by consideration nonlocal parameters vol.28, pp.1, 2021, https://doi.org/10.12989/cac.2021.28.1.069