References
- Turns, S. R., 2000, An Introduction to Combustion, McGraw Hill.
- Lieuwen, T. C. and Yang, V., 2005, Combustion Instabilities in Gas Turbine Engines : Operational Experience, Fundamental Mechanisms and Modeling, American Institute of Aeronautics and Astronautics, USA.
- Angello, L., 2005, Tuning Approaches for DLN Combustor Performance and Reliability, EPRI, Palo Alto, CA, USA.
- Gotoda, H., Nikimoto, H., Miyano, T., and Tachibana, S., 2011, Dynamic properties of combustion instability in a lean premixed gas-turbine combustor, Chaos, Vol. 21, No. 1, 013124. https://doi.org/10.1063/1.3563577
- Song, W. J. and Cha, D. J., 2016, Temporal kurtosis of dynamic pressure signal as a quantitative measure of combustion instability, Applied Thermal Engineering, Vol. 104, pp. 577-586. https://doi.org/10.1016/j.applthermaleng.2016.05.094
- DeCarlo, L. T., 1997, On the meaning and use of kurtosis, Psychological Methods, Vol. 2, No. 3, pp. 292-307. https://doi.org/10.1037/1082-989X.2.3.292
- Jemielniak, K. and Otman, O., 1998, Tool failure detection based on analysis of acoustic emission signals, Journal of Materials Processing Technology, Vol. 76, No. 1-3, pp. 192-197. https://doi.org/10.1016/S0924-0136(97)00379-8
- Hadjileontiadis, L. J., Douka, E., and Trochidis, A., 2005, Crack detection in beams using kurtosis, Computers & Structures, Vol. 83, No. 12-13, pp. 909-919. https://doi.org/10.1016/j.compstruc.2004.11.010
- Barszcz, T. and Randall, R. B., 2009, Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine, Mechanical Systems and Signal Processing, Vol. 23, No. 4, pp. 1352-1365. https://doi.org/10.1016/j.ymssp.2008.07.019
- Zakrajsek, J. J., Townsend, D. P., and Decker, H. J., 1993, An analysis of gear fault detection methods as applied to pitting fatigue failure data, National Aeronautics and Space Administration, Lewis Research Center, Cleveland, OH, USA, p. 12.
- Williams, T., Ribadeneira, X., Billington, S., and Kurfess, T., 2001, Rolling element bearing diagnostics in runto- failure lifetime testing, Mechanical Systems and Signal Processing, Vol. 15, No. 5, pp. 979-993. https://doi.org/10.1006/mssp.2001.1418
- Lieuwen, T., 2005, Online combustor stability margin assessment using dynamic pressure data, Journal of Engineering for Gas Turbines and Power, Vol. 127, pp. 478-482. https://doi.org/10.1115/1.1850493
- In, B. G., Song, W. J., and Cha, D. J., 2015, Development of LabView-based software for real-time assessment of combustion stability, Proceeding of the SAREK, 2015 Winter Annual Conference.
- Brandt, A., 2011, Noise and Vibration Analysis : Signal Analysis and Experimental Procedures, John Wiley & Sons, Chichester, UK, pp. 63-86.
- Lee, B. J., Lee, J. G., and Santavicca, D. A., 2004, Detection of the onset of unstable combustion in lean premixed combustors, AIAA Paper, 2004-457.
- Seo, S., Kim, S. K., and Choi, H. S., 2010, Combustion dynamics and stability of a fuel-rich gas generator, Journal of Propulsion and Power, Vol. 26, No. 2, pp. 259-266. https://doi.org/10.2514/1.46568