DOI QR코드

DOI QR Code

Preparation of Self-repairing Polymer-modified Waterproofing Asphalt-montmorillonite Composite: 1. Silylation Characteristics of Montmorillonite (K-10) Using 3-aminopropyltriethoxysilane and its Optimal Condition According to a Criterion by XRD Analysis

자가치유성을 갖는 고분자개질 방수아스팔트-몬모릴로나이트 composite 제조: 1. 3-aminopropyltriethoxysilane에 의한 몬모릴로나이트(K-10)의 실란화 특성 및 XRD 분석의 기준에 따른 최적화

  • Received : 2017.04.21
  • Accepted : 2017.05.22
  • Published : 2017.06.01

Abstract

In preparation of self-repairing polymer-modified waterproofing asphalt-montmorillonite (MMT) composite, silylation-modification characteristics of cation ($Na^+$) exchanged K-10 (Na-MMT-K) using 3-aminopropyltriethoxysilane (APS) were studied and the optimal conditions of its silylation-modification process were proposed by use of the results of XRD analysis on silylation-modified Na-MMT-K (S-Na-MMT-K) under various conditions. According to XRD results, it was confirmed that peaks of Na-MMT-K were simultaneously consistent with those of K-10 and natural or Ca-MMT modified Na-MMT. Similarly, S-Na-MMT-K was observed to have two basal spacings ($d_{001}$), among which the area-ratio of a secondary (001) peak ($2{\theta}=3.9{\sim}4.2^{\circ}$) to a primary (001) peak ($2{\theta}{\sim}8.838^{\circ}$) was suggested to be a criterion to represent a degree of APS silylation-modification. Then, the optimal conditions on APS-stirring period prior to APS-MMT reaction, APS-MMT reaction period, APS concentration and reaction temperature at the highest area-ratio were turned out to be 20 min, 2~3 hr, 7.5 w/v% and $50^{\circ}C$, respectively.

자가치유성을 갖는 고분자개질 빙수아스팔트-몬모릴로나이트(MMT) composite 제조를 위하여 양이온($Na^+$)교환 처리된 K-10 (Na-MMT-K)에 대한 3-aminopropyltriethoxysilane (APS) 개질의 특성을 규명하고 적정개질조건을 XRD 분석을 통하여 제시하였다. APS 개질된 Na-MMT-K (S-Na-MMT-K)에 대한 XRD 분석결과로서, Na-MMT-K는 K-10과 자연유래 또는 Ca-MMT에서 개질된 Na-MMT의 피크 특성들을 동시에 가지는 것이 확인되었다. 또한 S-Na-MMT-K도 동시에 두 개의 저면간격($d_{001}$) 특성들을 가짐이 관찰되었고, 그 중에서 부(001) 피크($2{\theta}=3.9{\sim}4.2^{\circ}$)와 주(001)피크($2{\theta}=8.838^{\circ}$ 근처)의 면적비(%)를 APS개질도에 대한 기준(criterion)으로 제시하였다. Na-MMT-K의 APS개질에 대한 반응전 APS 적정용해시간, 적정반응시간, 적정 APS농도 및 적정반응온도는 각각 20 min, 2~3시간, 7.5 w/v% 및 $50^{\circ}C$가 도출되었다.

Keywords

References

  1. Alexandre, M. and Dubois, P., "Polymer-layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials," Mater. Sci. Eng., 28, 1-63(2000). https://doi.org/10.1016/S0927-796X(00)00012-7
  2. Paul, D. R. and Robeson, L. M., "Polymer Nanotechnology: Nanocomposites," Polymer., 49, 3187-3204(2008). https://doi.org/10.1016/j.polymer.2008.04.017
  3. Pavlidou, S. and Papaspyrides, C. D., "A Review on Polymerlayered Silicate Nanocomposites," Prog. Polym. Sci., 33, 1119- 1198(2008). https://doi.org/10.1016/j.progpolymsci.2008.07.008
  4. Ray, S. S. and Okamoto, M., "Polymer/layered Silicate Nanocomposites: a Review from Preparation to Processing," Prog. Polym. Sci., 28, 1539-1641(2003). https://doi.org/10.1016/j.progpolymsci.2003.08.002
  5. Bertuoli, P. T., Piazza, D., Scienza, L. C. and Zattera, A. J., "Preparation and Characterization of Montmorillonite Modified with 3- aminoporpyltriethoxysilane," Applied Clay Science, 87, 46-51(2014). https://doi.org/10.1016/j.clay.2013.11.020
  6. Piscitelli, F., Posocco, P., Toth, R., Fermeglia, M., Pricl, S., Mensitieri, G. and Lavorgna, M., "Sodium Montmorillonite Silylation: Unexpected Effect of the Aminosilane Chain Length," Journal of Colloid and Interface Science, 351, 108-115(2010). https://doi.org/10.1016/j.jcis.2010.07.059
  7. Shanmugharaj, A., Rhee, K. Y. and Ryu, S. H., "Influence of Dispersing Medium on Grafting of Aminopropyltriethoxysilane in Swelling Clay Materials," Journal of Colloid and Interface Science, 298, 854-859(2006). https://doi.org/10.1016/j.jcis.2005.12.049
  8. Yi, J. and Kim, S. J., "Comparison of Properties of Natural Camontmorillonite and its Al-pillared Montmorillonites," J. Miner. Soc. Korea, 15, 273-282(2002).
  9. Reshimi, R. and Sugunan, S., "Superior Activities of Lipase Immobilized On Pure and Hydrophobic Clay Supports: Characterization and Catalytic Activity Studies," Journal of Molecular Catalysis B: Enzymatic, 97, 36-44(2013). https://doi.org/10.1016/j.molcatb.2013.04.003
  10. Husin, N. F. D. C., Harun, F. W., Jumal, J. and Othman, S. S., "Preparation and Physicochemical Properties of Metal Complexes Immobilized on Montmorillonite K10(MMT K10)," Journal of Industrial Engineering Research, 1(5), 8-13(2015).
  11. Frias, M., Martinelli, M. and Rolim, G. K., "Immobilized Molybdenum Acetylacetonate Complex on Montmorillonite K-10 as Catalyst for Epoxidation of Vegetable Oils," Applied Catalysis A: General, 403, 119-127(2011). https://doi.org/10.1016/j.apcata.2011.06.021
  12. Su, L., Tao, Q., He, H., Zhu, J. and Yuan, P., "Locking Effect: a Novel Insight in the Silylation of Montmorillonite Surfaces," Materials Chemistry and Physics, 136, 292-295(2012). https://doi.org/10.1016/j.matchemphys.2012.07.010
  13. Yoo, T., Cho, C., Cho, U., Lee, J. R. and Kim, S., "Preparation and Characterization of Epoxy Nanocomposites Incorporated with Aminosilanized Montmorillonite," Biomaterials Research, 15(2), 60-65(2011).
  14. Fiayyaz, M., Zia, K. M., Zuber, M., Jamil, T., Khosa, M. K. and Jamal, M. A., "Synthesis and Characterization of Polyurethane/ bentonite Nanoclay Based Nanocomposites Using Toluene Diisocyanate," Korean J. Chem. Eng., 31(4), 644-649(2014). https://doi.org/10.1007/s11814-013-0288-0
  15. Zeng, X., Xu, G., Gao, Y. and An, Y., "Surface Wettability of (3-aminopropyl)triethoxysilane Self-assembled Monolayers," J. Phys. Chem. B., 115(3), 450-454(2011). https://doi.org/10.1021/jp109259b
  16. Lee, E. J., Lee, J. H. and Lim, K.-H., "Preparation of Self-repairing Polymer-modified Waterproofing Asphalt-montmorillonite Composite: 2. Validation of Optimized Silylation of Montmorillonite (K-10) Using 3-aminopropyltriethoxysilane," Korean Chem. Eng. Res., 55(3), 409-418(2017). https://doi.org/10.9713/kcer.2017.55.3.409
  17. He H., Duchet, J., Galy, J. and Gerard, J. F., "Grafting of Swelling Clay Materials with 3-aminopropyltriethoxysilane," Journal of Colloid and Interface Science, 288, 171-176(2005). https://doi.org/10.1016/j.jcis.2005.02.092
  18. Uddin, F., "Clays, Nanoclays and Montmorillonite Minerals," Metallurgical and Materials Transactions A, 39A, 2804-2814 (2008).
  19. Zhang, Y., Jiang, T., Chen, L. and Li, G., "Study on Sodium Modification of Inferior Ca-based Bentonite by Suspension Method," ISRN Materials Science, Volume 2011, Article ID 953132, 6 pages, doi:10.5402/2011/953132(2011).
  20. Shen, W., He, H., Zhu, J., Yuan, P. and Frost, R. L., "Grafting of Montmorillonite with Different Functional Silanes via two Different Reaction Systems," Journal of Colloid and Interface Science, 313(1), 268-273(2007). https://doi.org/10.1016/j.jcis.2007.04.029