Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Empirical Equations Predicting Major Parameters for Simulating Cyclic Behavior of Rectangular HSS Braces

장방형 각형강관 가새부재 이력거동 예측을 위한 주요변수의 경험식 제안

  • Han, Sang Whan (Department of Architecture, Hanyang University) ;
  • Sung, Min Soo (Department of Civil and Environmental Engineering, Univ. of Illinois at Urbana-Champaign) ;
  • Mah, Dongjun (Department of Architecture, Hanyang University)
  • 한상환 (한양대학교 건축공학과) ;
  • 성민수 (일리노이 공과대학교 토목공학과) ;
  • 마동준 (한양대학교 건축공학과)
  • Received : 2017.02.24
  • Accepted : 2017.04.20
  • Published : 2017.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The cyclic behavior of braces is complex due to their asymmetric properties in tension and compression. For accurately simulating the cyclic curves of braces, it is important to predict the major parameters such as cyclic brace growth, cyclic buckling load, incidence local buckling and fracture with good precision. For a given brace, the most accurate values of these parameters can be estimated throughout experiments. However, it is almost impossible to conduct experiments whenever an analytical model has to be established for many braces in building structures due to enormous cost and time. For avoid such difficulties, empirical equations for predicting constituent parameters are proposed from regression analyses based on test results of various braces. This study focuses on rectangular hollow structural section(HSS) steel braces, which have been popularly used in construction practice owing to its sectional efficiency.

Keywords

References

  1. Archambault MH. Etude du Comportement Seismique Des Contreventements Ductiles en X A vee Profiles Tubularies en Acier. Report EPM/GCS-1995-09, Dept. of Civil Engineering, Ecole Polytechnique, Montereal, Que. c1995.
  2. Black GR, Wenger BA, Popov EP. Inelastic Buckling of Steel Strut under Cyclic Load Reversals. UCB/EERC-80/40, Earthquake Engineering Research Center, Berkeley, CA. c1980.
  3. Bonneville D, Bartoletti S. Case Study 2.3: Concentric Braced Frame, Lankershim Boulevard, North Hollywood, 1994 Northridge Earthquake; Building Case Studies Project; Proposition 122: Product 3.2, SSC 94-06, Seismic Safety Commission State of California, 305-324. c1996.
  4. Bruneau M, Uang CM, Sabelli SR. Ductile design of steel structures. McGraw Hill Professional. c2011.
  5. Dicleli M, Calik EE. Physical theory hysteretic model for steel braces. Journal of structural engineering. 2008;134(7):1215-1228. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1215)
  6. Fell BV, Kanvinde AM, Deierlein GG, Myers AT. Experimental investigation of inelastic cyclic buckling and fracture of steel braces. Journal of Structural Engineering. 2009;135(1):19-32. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:1(19)
  7. Gugerli H, Goel SC. Inelastic cyclic behavior of steel bracing members. Rep. No. UMEE 82R1, Dept. of Civil Engineering, Univ. of Michigan, Ann Arbor, Michigan. c1982.
  8. Han SW, Kim WT, Foutch DA. Seismic Behavior of HSS Bracing Members according to Width-Thickness Ratio under Symmetric Cyclic Loading. Journal of Structural Engineering, 2007;133(2): 264-273. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2(264)
  9. Hassan OF, Goel SC. Modeling of Bracing Members and Seismic Concentrically Braced Frames. UMCE 91-1, Univ. of Michigan, College of Engineering, Ann Arbor, MI 48109-2125. c1991.
  10. Ikeda K, Mahin SA, Dermitzakis SN. Phenomenological Modeling of Steel Braces Under Cyclic Loading. UCB/EERC-84/09, Earthquake Engineering Research Center, Berkeley, CA. c1984.
  11. Jin J, El-Tawil S. Inelastic cyclic model for steel braces. Journal of Engineering Mechanics. 2003;129(5):548-557. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:5(548)
  12. Lee S, Goel SC. Seismic Behavior of Hollow and Concrete Filled Square Tubular Bracing Members. UMCE87-11, Univ. of Michigan, College of Engineering, Ann Arbor, MI 48109-2125. c1987.
  13. Liu YK, Goel VK. Mathematical models of the spine and their experimental validation. The Lumbar Spine and Back Pain/Ed. Jayson MIV.-3rd ed.-New York: Churchill Livingstone, 1987: 177-190.
  14. Nonaka T. Formulation of inelastic bar under repeated axial and thermal loadings. Journal of engineering mechanics. 1987;113(11): 1647-1664. https://doi.org/10.1061/(ASCE)0733-9399(1987)113:11(1647)
  15. Nonaka T. Elastic-plastic bar under changes in temperature and axial load. Journal of Structural Engineering. 1989;115(12):3059-3075. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:12(3059)
  16. Popov EP, Black RG. Steel struts under severe cyclic loadings. Journal of the Structural Divisiosn. 1981;107(9):1857-1881.
  17. Shaback JB. Behavior of square HSS braces with end connections under reversed cyclic axial loading. Univ. of Calgary. c2001.
  18. Shaback B, Brown T. Behaviour of square hollow structural steel braces with end connections under reversed cyclic axial loading. Canadian Journal of Civil Engineering. 2003;30:745-753. https://doi.org/10.1139/l03-028
  19. Soroushian P, Alawa MS. Hysteretic modeling of steel struts: Refined physical theory approach. Journal of Structural Engineering. 1990;116(11):2903-2916. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:11(2903)
  20. Tang X, Goel SC. Seismic analysis and design considerations of concentrically braced steel structures. In Report n. UMCE 87‐4. Univ. of Michigan. c1987.
  21. Tremblay R. Inelastic seismic response of steel bracing members. Journal of Constructional Steel Research, 58. c2002.
  22. Tremblay R, Archambault MH, Filiatrault A. Seismic Response of Concentrically Braced Steel Frames Made with Rectangular Hollow Bracing Members. American Society of Civil Engineers: Journal of Structural Engineering. 2003;129(12):1626-1636.
  23. Uang CM, Bertero VV. Earthquake simulation tests and associated studies of a 0.3-scale model of a six-story concentrically braced structure. Technical Rep. No. UCB/EERC-86, 10. c1986
  24. Zayas AZ, Shing PB, Mahin SA, Popov EP. Inelastic Structural Modeling of Braced Offshore Platforms for Seismic Loading. Report No. UCB/EERC-81/04. Berkeley: Earthquake Engineering Research Center, Univ. of California. c1981.