한국수소및신에너지학회논문집 (Journal of Hydrogen and New Energy)

  • 제28권2호
  • /
  • Pages.212-219
  • /
  • 2017
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

수치 해석 및 모형실험을 이용한 수중 일점 계류식 조류발전 장치의 운동 성능 고찰

Investigation of Motion of Single Point Moored Duct-type TCP System by Both Numerical and Experimental Method

  • 조철희 (인하대학교 조선해양공학과) ;
  • 박홍재 (인하대학교 조선해양공학과) ;
  • 조봉근 (인하대학교 조선해양공학과) ;
  • 김명주 (인하대학교 조선해양공학과)
  • JO, CHUL HEE (Department of Naval Architecture and Ocean Engineering, Inha University) ;
  • PARK, HONG JAE (Department of Naval Architecture and Ocean Engineering, Inha University) ;
  • CHO, BONG KUN (Department of Naval Architecture and Ocean Engineering, Inha University) ;
  • KIM, MYEONG JOO (Department of Naval Architecture and Ocean Engineering, Inha University)
  • 투고 : 2017.03.30
  • 심사 : 2017.04.30
  • 발행 : 2017.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

As an environmental pollution and global warming due to an excessive carbon emission are intensified, the importance of renewable energy is in rise today. TCP (Tidal Current Power), one of the renewable energy sources, generates electricity by converting kinetic energy of current into rotational energy of turbine. Also the TCP has a great advantages of predictability and reliability. Because the generating power is proportional to cubic of stream velocity, amplifying current speed by applying duct is highly effective to increase the generating power. SPM (Single Point Mooring) can be applied for the weather vane with various current direction and also augments generating power of the system. In addition, simple installation and retrieval could be a merit of SPM system. By combining duct and SPM, TCP system for relatively low-speed-current and shallow water region can be feasible and economical. In this study, single point moored duct-type TCP system was designed and the motion of submerged structure was investigated in both numerical and experimental method. DNV wadam V4.8-1 and OrcaFlex 10.0a were used for the frequency and time domain motion analysis of system respectively. Duct model scaled by 0.05 of Froude conformity ratio and CWC (Circulate Water Channel) are used for experiment.

키워드

참고문헌

  1. D. S. Byun, E. H. Deirdre, and W. J. Jeong, "Tidal Current Energy Resources off the South and West Coasts of Korea: Preliminary Observation-Derived Estimates", Energies, Vol. 6, No. 2, 2013, pp. 566-578. https://doi.org/10.3390/en6020566
  2. C. H. Jo, K. H. Lee, J. Y. Yim, and K. S. Che, "Performance Evaluation of TCP Device with Upstream Duct Installation", Proceeding of the Korean Association of Ocean Science and Technology Societies Conference, 2009, pp. 77-80.
  3. P. Khunthongjan and A. Janyalertadun, "A study of Diffuser Angle Effect on Ducted Water Current Turbine Performance Using CFD", Songklanakarin Journal of Science and Technology, Vol. 34, No. 1, 2012, pp. 61-67.
  4. H. C. Roger, "A sleeper awakes : tidal current power", Renewable and Sustainable Energy Reviews, Vol. 7, 2003, pp. 515-529. https://doi.org/10.1016/S1364-0321(03)00079-0
  5. C. H. Jo, K. H. Lee, S. J. Cho, and C. H. Goo, "Performance of the Duct Implemented in Single Point Moored TCP System with Various Diffuser Angles", Proceeding of Korean Association of Ecean Science and Technology Societies Conference, 2015.
  6. C. L. Cunff, S. Ryu, J. M. Heurtier, and A. S. Duggal, "Frequency-domain Calculations of Moored Vessel Motion Including Low Frequency Effect", Proceeding of the 27th International Conference on Offshore Mechanics and Arctic Engineering, 2008, pp. 689-696.
  7. W. S. Yang, "Hydrodynamic Analysis of Mooring Lines Based on Optical Tracking Experiments", Texas A&M University, Ph.D. thesis, 2007.
  8. K. Sachithanathamoorthy, "Design and analysis of tension leg anchor systems for floating windmills", Norwegian University of Science and Technology, Master's thesis, 2012.
  9. C. H. Jo, Y. H. Rho, D. Y. Kim, and M. J. Kim, "Dynamic Response of Single Point Mooring Tidal Energy Converter with Various Duct Configurations", Proc. of The Korean Society for New and Renewable Energy, 2015.
  10. K. O. Ko, K. H. Lee, C. B. Park, and C. H. Jo, "Design of Supporting Structure for Tidal Current Power Generation Using Tidal Bladed", Journal of Costal Disaster Prevention, Vol. 3, No. 3, 2016, pp. 107-121.