References
- J. E. Dec, "Advanced Compression-ignition Engines Understanding the In-cylinder Processes," Proc. of the Combustion Institute, Vol.32, Issue 2, pp.2727-2742, 2009. https://doi.org/10.1016/j.proci.2008.08.008
- K. Kim and C. Bae, "Operating Characteristics of Dual-fuel Combustion with DME and Gasoline in a Compression Ignition Engine," Transactions of KSAE, Vol.22, No.1, pp.157-164, 2014.
- J. B. Hewood, International Combustion Engine Fundamentals, McGraw-hills, New York, pp.25-37, 1988.
- Y. Kong, T. Kozakiewicz, R. Johnson, C. Huffmeyer, J. Huckaby, J. Abel, J. Baurly and K. Duffield, "Active DPF Regeneration for 2007 Diesel Engines," SAE 2005-01-3509, 2005.
- P. Tennison, C. Lambert and M. Levin, "NOx Control Development with Urea SCR on a Diesel Passenger Car," SAE 2004-01-1291, 2004.
- D. Reitz and G. Duraisamy, "Review of High Efficiency and Clean Reactivity Controlled Compression Ignition (RCCI) Combustion in Internal Combustion Engines," Progress in Energy and Combustion Science, Vol.46, No.2, pp.12-71, 2015. https://doi.org/10.1016/j.pecs.2014.05.003
- M. Iida, T. Aroonsrisopon, M. Hayashi, D. Foster and J. Martin, "The Effect of Intake Air Temperature Compression Ratio and Coolant Temperature on the Start of Heat Release in an HCCI Engine," SAE 2001-01-1880/4278, 2001.
- K. Senthil Kumar and R. Raj, "Effect of Fuel Injection Timing and Elevated Intake Air Temperature on the Combustion and Emission Characteristics od Dual Fuel Operated Diesel Engine," Procedia Engineering, Vol.64, No.129, pp.1191-1198, 2013. https://doi.org/10.1016/j.proeng.2013.09.198
- J. H. Son, J. Y. Ko, D. Y. Jin, C. L. Myung and S. W. Park, "Real-time NOx and Particle Emissions Characteristics from a Light-duty Diesel Passenger Vehicle under Low Temperature Driving Conditions," KSAE Annual Conference Proceedings, p.281, 2014.
- H. Kim, H. Lee and C. Oh "Study on the Emission Characteristics of Passenger Diesel Engine in according to Coolant and Intercooler Temperature," KSAE Spring Confernece Proceedings, pp.195-199, 2013.
- A. Ko, W. Jang, D. Jin, S. Baek, C. Myung and S. Park. "The Experimental Study of Environmental Temperature on Combustion and Exhaust Gas Characteristics of Light-duty Diesel Engine," Kosco Symposium, pp.35-36, 2013.
- C. Cinar, A. Uyumaz, H. Solmaz, F. Sahin and E. Yilmaz, "Effects of Intake Air Temperature on Combustion Characteristics of a HCCI Engine Fuel with the Blends of 20% n-heptane and 80% Isooctane Fuels," Fuel Processing Technology, Vol.30, No.34, pp.275-281, 2015.
- C. Woo, S. Kook and R. Hawkes, "Effect of intake Air Temperature and Common-rail Pressure on Ethanol Combustion in a Single-cylinder Light-duty Diesel Engine," Fuel, Vol.180, pp.9-19, 2016. https://doi.org/10.1016/j.fuel.2016.04.005
- S. Han, J. Kim and C. Bae, "Effect of Air-fuel Mixing Quality on Characteristics of Conventional and Low Temperature Diesel Dngine," Applied Energy, Vo1.19, No.43, pp.454-466, 2014.
- Y. Shim, G. Choi and D. Kim, "Experimental and Numerical Study on Behavior of Impinging Spray According to Ambient Temperature," Transactions of KSAE, Vol.15, No.4, pp.124-131, 2007.
- W. Cho, Y. Park, C. Bae, J. Yu and Y. Kim "Influence of Ultra-high Injection Pressure and Nozzle Hole Diameter on Diesel Flow and Spray Characteristics under Evaporating Condition," ILASS-Korea, Vol.20, No.1, pp.43-52, 2015. https://doi.org/10.15435/JILASSKR.2015.20.1.43