References
- P. S. Jang, W. H. Jung, J. S. Hyun, “Effect of Abstraction and Realism on Uncanny Valley In 3D Character Model,” Journal of Digital Convergence, Vol. 14, No. 10, pp. 277-285, 2016. https://doi.org/10.14400/JDC.2016.14.10.277
- M. J. Kim, “Research trends in rehabilitation program for disabled applying virtual reality technology in Korea,” The Journal of Digital Convergence, Vol. 13, No. 2, pp. 381-391, 2015. https://doi.org/10.14400/JDC.2015.13.2.381
- Ju-Yang Lee & Phil-Sik Jang, “Effects of Message Polarity and Type on Word of Mouth through SNS (Social Network Service),” The Journal of Digital Policy & Management, Vol. 11, No. 6, pp. 129-135, 2013.
- Y. S. Jeong, Y. T. Kim, G. C. Park, “A Three-dimensional Numerical Weather Model using Power Output Predict of Distributed Power Source,” Journal of Convergence Soceity for SMB, Vol. 6, No. 4, pp. 93-98, 2016. https://doi.org/10.22156/CS4SMB.2016.6.4.093
- H. J. Lee, J. S. Han, Y. K. Jeong, I. W. Lee and S. H. Lee, “A Technology of Context-aware based Building Management for Energy Efficiency,” Journal of Convergence Soceity for SMB, Vol. 2, No. 1, pp. 69-75, 2016.
- C. H. Jin, X. Li, K. I. Kim, M. Y. Hwang, S. Y. Kim, K. D. Kim, K. H. Ryu, “Filtering Method for Analyzing Renewable Energy Stream Data,” Journal of Convergence Soceity for SMB, Vol. 1, No. 1, pp. 39-44, 2011.
- J. H. Lee, J. U. Cho, “Convergence Technique Study of Model Tie Rod End by Configuration through Simulation Analysis,” Journal of the Korea Convergence Society, Vol. 7, No. 1, pp. 161-166, 2016. https://doi.org/10.15207/JKCS.2016.7.1.161
- J. H. Lee, J. U. Cho, “Convergence Technique Study through CAE due to the Shape of Lift for Car,” Journal of the Korea Convergence Society, Vol. 6, No. 5, pp. 49-54, 2015. https://doi.org/10.15207/JKCS.2015.6.5.049
- E. Shellshear, R. Berlin, and J. S. Carlson, “Maximizing Smart Factory Systems by Incrementally Updating Point Clouds,” IEEE Computer Graphics and Applications, Vol. 35, No. 2, pp. 62-69, 2015. https://doi.org/10.1109/MCG.2015.38
- T. S. Jeong, "The Suggestion for Successful Factory Converging Automation by Reviewing Smart Factories In German," Journal of the Korea Convergence Society Vol. 7, No. 1, pp. 189-196, 2016. https://doi.org/10.15207/JKCS.2016.7.1.189
- http://navercast.naver.com/magazine_contents.nhn?rid=1697&contents_id=30687
- http://it.donga.com/20408
- Chuck Hull, Apparatus for Production of Three-Dimensional Objects by Stereolithography, 1986(Pat. No. : US4575330A)
- J. J. Kim, D. H. Won, J. S. Gook. "Manufacture of Clad Titanium Alloy Artificial Hip Joint by Explosive Welding," Jou. of Korean Soc. of Mechanical Technology, Vol. 16, No. 1, pp. 1075-1082, 2014. https://doi.org/10.17958/ksmt.16.1.201402.1075
- S. M. Hong, J. H.H wang, J. W. Sim, W. J. Chung, M. S. Joun, "Causes of Fracture Occuring in Plate Forging of Clad Plate," Proceedings of the Korean Society for Technology of Plasticity, Vol. 2015, No. 5, pp. 165-168, 2015.
- J. K Mun, "A Study on the explosive Cladding of Heterogeneous Materials," Hongik University, Ph. D. thesis, 1993.
- M. G. Kim, “Impact pressure range and explosion pressure,” Journal of Basic Sciences, Vol. 9, No. 1, pp. 41-65, 1999.
- J. J. Kim, D. H. Won, J. S. Gook, “Manufacture of Clad Titanium Alloy Artificial Hip Joint by Explosive Welding,” Jou. of Korean Soc. of Mechanical Technology, Vol. 16, No. 1, pp. 1075-1082, 2014. https://doi.org/10.17958/ksmt.16.1.201402.1075
- S. B. Cho, "A Study on The Parameters For Stress Intensity Factors of An Interface Crack in Anisotropic Dissimilar Materials," Symposium, Vol. 11, No. 1, pp. 33-39, 1999.
- J. B. Lee, D. H. Yang, S. Y. Kim and K. S. Kim, “A Study on Flow Analysis of the Blast Valve for Anti-aircraft Shelter,” J. Korean Soc. Mech. Technol, Vol. 17, No. 5, pp. 1107-1115, 2015. https://doi.org/10.17958/ksmt.17.5.201510.1107
- W. D. Callister. Jr, "Materials science and engineering an introduction 6th edition," John and Wiley & Sons, pp. 781-785, 2004.
- P. Incropera, D. P. Dewiti, "Introduction To Heat Transfer," John Wiley & Sons, Inc. 1993.