참고문헌
- B. J. Shim, Y. Choi, and J. S. Yi, "Improvement of COF Bending-induced Lead Broken Failure in LCD Module", J. KIEEME 21, 265 (2008).
- B. J. Kim, M. H. Jeong, S. H. Hwang, H. Y. Lee, S. W. Lee, K. D. Chun, Y. B. Park, and Y. C. Joo, "Relationship between Tensile Characteristics and Failure by Folding or Bending in Cu Foil on Flexible Substrate", J. Microelectron. Packag. Soc., 18(1), 55 (2011).
- S. J. Krumbein, "Metallic electromigration phenomena", IEEE Trans. Compon. Hybrids, Manufact. Tecnol, 11, 5 (1988). https://doi.org/10.1109/33.2957
- S. B. Lee, Y. R. Yoo, J. Y. Jung, Y. B. Park, Y. S. Kim and Y. C. Joo, "Electrochemical Migration Characteristics of Eutectic SnPb Solder alloy in Printed Circuit Board", Thin Solid Films, 504, 294 (2006). https://doi.org/10.1016/j.tsf.2005.09.022
- J. Y. Jung, S. B. Lee, Y. R. Yoo, Y. S. Kim, Y. C. Joo, Y. B. Park, "Dominant Migration Element in Electrochemical Migration of Eutectic SnPb Solder Alloy in D. I. Water and NaCl Solutions", J. Microelectron. Packag. Soc., 13(3), 1. (2006).
- H. Tanaka, and K. S. Kim, "Introduction of Reliability Test Technology for Electronics Package", J. Microelectron. Packag. Soc., 19(1), 1. (2012). https://doi.org/10.6117/kmeps.2012.19.1.001
- Y. Kimura, S. Isawa, and M, Chino, "Ionic Migration Behavior in Fine Pitched Wiring on Flexible Substrate for Flat Panel Displays", 14th KGD Packaging and Test Workshop 2007, California, Die Products Consortium (DPC) (2007).
- D. Y. Shin, D. Y. Park, and B. K. Koo, "Effect of Current Density and Solution pH on Properties of Electrodeposited Cu Thin Films from Sulfate Baths for FCCL Applications", J. Kor. Inst. Surf. Eng., 42, 145 (2009). https://doi.org/10.5695/JKISE.2009.42.4.145
- B. S. Min, K. H. Seo, W. S. Chung, I. S. Lee, and S. C. Park, "Application of Plasma Cleaning for Plating Pretreatment", J. Kor. Inst. Met. & Mater., 40, 886 (2002).
- A. Ebe, E Takahashi, Y. Iwamoto, N. Kuratani, S. Nishiyama, O. Imai K. Ogata, Y. Setsuhara, and S. Miyake, "Improvement of the adhesion to polyimide substrates of copper films prepared by an ion beam and vapor deposition method", Thin Solid Films, 281, 356, (1996).
- S. H. Kim, "Ammonia Treatment of Polyimide Film", J. Kor. Fiber Soc., 31, 57 (1994).
- K. J. Min, S. C. Park, K. H. Lee, Y. S. Jeong, and Y. B. Park, "Effect of Wet Chemical Pretreatment Conditions on the Interfacial Adhesion Energy between Electroless-Plated Ni and Polyimide Films", Jpn. J. Appl. Phys., 49, 08JK01 (2010).
- H. J. Kim, Y. J. Park, J. H. Choi, H. S. Han, and Y. T. Hong, "Surface modification of polyimide film by coupling reaction for copper metallization", J. Industr. Engin. Chemi., 15, 23 (2009). https://doi.org/10.1016/j.jiec.2008.08.016
- H. K. Yun, K. Cho, J. K. Kim, C. E. Park, S. M. Sim, S. Y. Oh, and M. Park, "Adhesion improvement of epoxy resin/ polyimide joints by amine treatment of polyimide surface", Polymer, 38, 827 (1997). https://doi.org/10.1016/S0032-3861(96)00592-7
- S. R. Kim, and H. Y. Lee, "Measurement of Adhesion", Journal of Adhesion and Interface., 4, 21 (2003).
- S. C. Park, K. J. Min, K. H. Lee, Y. S. Jeong, and Y. B. Park, "Effect of Annealing on the Interfacial Adhesion Energy between Electroless-Plated Ni and Polyimide", Met. Mater. Int., 17, 111 (2011). https://doi.org/10.1007/s12540-011-0215-z
- S. C. Park, J. W. Kim, K. H. Kim, S. H. Park, Y. M. Lee, and Y. B. Park, "Interfacial Adhesion between Screen-Printed Ag and Epoxy Resin-Coated Polyimide", J. Microelectron. Packag. Soc., 17(1), 41. (2010).
- C. D. Wagner, W. M. Riggs, L. E. Davis and J. F. Moulder, "Handbook of X-ray Photoelectron Spectroscopy", pp.56, 84, Perkin-Elmer, U.S.A (1978).
- K. J. Min, M. H. Jeong, K. H. Lee, Y. S. Jeong, and Y. B. Park, "Effect of Temperature/Humidity Treatment Conditions on Interfacial Adhesion of Electroless-plated Ni on Polyimide", J. Kor. Inst. Met. & Mater., 47, 10 (2009).