DOI QR코드

DOI QR Code

섬유로프 계류시스템의 크리프 효과가 부유체의 운동응답 및 계류선의 장력 변화에 미치는 영향에 관한 연구

A Study on Creep Effect of Synthetic Fiber Rope Mooring System on Motion Response of Vessel and Tension of Mooring Line

  • 박성민 (한국해양대학교 조선해양시스템공학부) ;
  • 이승재 (한국해양대학교 조선해양시스템공학부) ;
  • 강수원 (한국해양대학교 조선해양시스템공학부)
  • Park, Sung Min (Division of Naval Architecture and Ocean Systems Engineering, Korea Maritime and Ocean University) ;
  • Lee, Seung Jae (Division of Naval Architecture and Ocean Systems Engineering, Korea Maritime and Ocean University) ;
  • Kang, Soo Won (Division of Naval Architecture and Ocean Systems Engineering, Korea Maritime and Ocean University)
  • 투고 : 2016.10.11
  • 심사 : 2017.03.22
  • 발행 : 2017.04.20

초록

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

키워드

참고문헌

  1. ABS, 2010. Polyester rope stiffness modeling, testing, and analysis. Joint industry project phase 1 report no. TR-2010-03. ABS Plaza, Houston.
  2. ABS, 2011. The application of fiber rope for offshore mooring. ABS Plaza, Houston.
  3. API, 2007. Recommended practice 2SM. American Petroleum Institute(API): USA.
  4. Banfield, S.J., 2006. Durability of polyester ropes used as deepwater mooring lines. OCEANS 2006, IEEE, Singapore, 16-19 May 2006, pp.1-5.
  5. Del Vecchio, C.J.M., 1992. Light weight materials for deep water moorings. PhD Thesis. University of Reading.
  6. Francois, M. & Davies, P., 2000. Fiber rope deep water mooring: a practical model for the analysis of polyester mooring system. Rio Oil and Gas Conference, IBP24700, Rio de Janeiro, Brazil, 16-19 October 2000, pp.1-10
  7. Leite, S. & Boesten, J., 2011. HMPE mooring lines for deepwater MODUs. Offshore Technology Conference, Rio de Janeiro, Brazil, 4-6 October 2011, pp.1-9.
  8. NDE & TTI, 1999. Engineers design guide for deepwater fibre moorings. Joint industry study report No L17739-Rev.F/DNE/RWPS. London: Oilfield Publication.
  9. Park, S.B., 2015. Study on spread mooring layout under ocean environmental loads for FPSO. Master's degree thesis, Pusan National University.
  10. Vlasblom, M.P. & Bosman, R.L.M., 2006. Predicting the creep lifetime of HMPE mooring rope applications. OCEANS 2006, IEEE, Singapore, 16-19 May 2006, pp.1-10.
  11. Vlasblom, M.P. Boesten, J. Leite, S. & Davies, P., 2012. Development of HMPE fiber for permanent deepwater offshore mooring. Offshore Technology Conference, Houston, Texas, USA, 30 April-3 May 2012, pp.1-15
  12. Yongjun, C. Yan, Q. & Tianyu, Z., 2013. Polyester mooring stiffness modeling for deepwater floating system. Engineering Sciences, 4, pp.1-7.
  13. Zhang, W. Jeong, C. & Spreeken, A. V., 2013. Float-over feasibility in brazilian sea water. Offshore Technology Conference, Rio de Janeiro, Brazil, 29-31 October 2013, pp.1-10.