Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Feature Analysis based on Genetic Algorithm for Diagnosis of Misalignment

정렬불량 진단을 위한 유전알고리듬 기반 특징분석

  • Received : 2016.12.07
  • Accepted : 2017.02.23
  • Published : 2017.04.20
Download PDF
⟨ Previous Next ⟩

Abstract

An compressor that is combined with the rotor and pneumatic technology has been researching for the performance of pressure. However, the control of operations, an accurate diagnosis and the maintenance of compressor system are limited though the simple structure of compressor and compression are advantaged to reduce the energy. In this paper, the characteristic of the compressor operating under the normal or abnormal condition is realized. and the efficient diagnosis method is proposed through feature based analysis. Also, by using the GA (genetic algorithm) and SVM (support vector machine) of machine learning, the performance of feature analysis is conducted. Different misalignment mode of learning data for compressor is evaluated using the fault simulator. Therefore, feature based analysis is conducted considering misalignment mode of the compressor and the possibility of a diagnosis of misalignment is evaluated.

Keywords

References

  1. Kim, Y. K., Lee, D. S., Lee, B. C. and Lee, H., 2000, Noise and Vibration Characteristics of an A/C Compressor Base, Proceedings of the KSNVE Annual Spring Conference, pp. 1423-1428.
  2. Muszynska, A., 1984, Partial Lateral Rotor to Stator Rubs, ImechEC281/84, pp. 327-335.
  3. Choi, Y. S., 2000, Experimental Investigation of Partial Rotor Rub, KSME International Journal, Vol. 14, No. 11, pp. 1250-1256.
  4. Heo, J. W., Chung, J. T. and Choi, K. Y., 2002, Vibration Analysis of a Flexible Spinning Disk Considering the Effect of Misalignment, Transactions of the Korean Society of Mechanical Engineers, Vol. 26, No. 5, pp. 952-959. https://doi.org/10.3795/KSME-A.2002.26.5.952
  5. Ahn, B. H., Kim, Y. H., Lee, J. M., Lee, J. H., Choi, B. K., 2014, Signal Processing Technology for Rotating Machinery Fault Signal Diagnosis, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 24, No. 7, pp. 555-561. https://doi.org/10.5050/KSNVE.2014.24.7.555
  6. Huang, C. L. and Wang, C. J., 2006, A GA-based Feature Selection and Parameters Optimization for Support Vector Machines, Expert Systems with Applications, Vol. 31, No. 2, pp. 231-240. https://doi.org/10.1016/j.eswa.2005.09.024
  7. Widodo, A. and Yang, B. S., 2007, Support Vector Machine in Machine Condition Monitoring and Fault Diagnosis, Mechanical Systems and Signal Processing, Vol. 21, No. 6, pp. 2560-2574. https://doi.org/10.1016/j.ymssp.2006.12.007