References
- ANGELI MARIZ URBANO GAMEZ(2011), IMPACT OF CURING TIME ON WARM MIX ASPHALT SHORT-TERM PERFORMANCE, Submitted in partial fulfillment of the requirements for the degree of Master of Science in Civil Engineering in the Graduate College of the University of Illinois at Urbana-Champaign.
- British Standard Institution(2012), Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen.
- Hibbitt, ABAQUS Theory manual and users manual, Karlsson & Sorensen, Inc.
- Jun Zhang(2010), Effects of Warm-mix Asphalt Additives on Asphalt Mixture Characteristics and Pavement Performance, University of Nebraska - Lincoln.
- Kgs.Lyngby(2012), CALCULATION OF ASPHALT PRODUCTION ENERGY FLOW TO COMPARE WARM AND HOT MIX ASPHALT, 5TH Eurasphalt & Eurobitume Congress, 13-15TH June 2012, Istanbul.
- Korean Standards Service Network(2006), KS F 2490, "Standard test method for asphalt content of hot-mix asphalt by ignition method".
- Korean Standards Service Network(2007), KS F 2511, "Testing method for amount of material finer than 0.08 mm sieve in aggregate".
- Korean Standards Service Network(2007), KS F 2507," Method of test for soundness of aggregates by use of sodium sulfate".
- Korean Standards Service Network(2007), KS F 2508," Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine".
- Korean Standards Service Network(2014), KS F 2541, "Testing method for determination of aggregates crushing value".
- Korean Standards Service Network(2014), KS F 2575, "Standard test method for flat or elongated particles in coarse aggregate".
-
Korean Standards Service Network(2014), KS F 2580, "Test method of the immersion expansion in
$80^{\circ}C$ water of the iron and steel slag". - Korean Standards Service Network(2014), KS F 2446, "Standard test method of test for bulk specific gravity and density of compacted bituminous mixtures using saturated surface dry specimens".
- Korean Standards Service Network(2014), KS F 2364, "Standard test method for percent air voids in compacted dense and open asphalt mixtures".
- Korean Standards Service Network(2014), KS F 2376, "Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode".
- Kwang W. Kim, Young S. Do, Ki H. Lee, Mun J. Cho, Seung J. Kwon, (2004) "A Mechanistic Consideration of Deformation Strength by Kim test,"Korean Society of Road Engineers.
- Mr.Lou Politana(2012), Warm Mix Asphalt - A greener Alternative to Hot Mix Asphalt, Ministry of Transportation of Ontario.
- Namkoong, Youn, Han Jong Min, Lee Suck Hong, Suh Soon Il(2006), "A Study for Asphalt Concrete Mixture using EAF Steel Slag", Korean Society of Road Engineers.
- NCHRP(2004), Guide for Mechanistic-Empirical Design.
-
Ning Lee.hai-Pei CHOU.Kuan-Yu CHEN(2011), Benefits in Energy Savings and
$CO_2$ Reduction by Using Reclaimed Asphalt Pavement, Department of Civil Engineering (National Taiwan University). - Seong H. Lee, Kwang W. Kim, Ji Y. Park, Jae B. Yang, Il-Ho Na(2014), "An analysis of resilient modulus for different types of asphalt mixtures", The Korean Society for Railway.
- Yang H. Huang(1993), Pavement Analysis and Design, University of Kentucky.
Cited by
- A Study on a Steel Slag Asphalt Concrete Design Method Considering Density and Absorption vol.20, pp.1, 2018, https://doi.org/10.7855/IJHE.2018.20.1.059