DOI QR코드

DOI QR Code

벙커 C유를 사용한 에멀젼 연료유의 배기가스 특성

Emission Evaluation of Emulsion Fuel Prepared from Bunker C Oil

  • 임흥균 (동국대학교-서울 공과대학 화공생물공학과) ;
  • 이명진 (주식회사 위즈켐) ;
  • 지경엽 (대구한의대학교 한방산업대학 바이오산업융합학부) ;
  • 임종주 (동국대학교-서울 공과대학 화공생물공학과)
  • 투고 : 2016.12.19
  • 심사 : 2017.01.20
  • 발행 : 2017.04.10

초록

본 연구에서는 OIMS90과 NP12 계면활성제 혼합물을 사용하여 물/벙커 C 오일 비율, 계면활성제 농도 및 조성, 유화 시간, 교반 속도 및 시간, 온도 등을 변화시키면서 유중수적형(water-in-oil, W/O) 에멀젼 연료를 제조하였다. OIMS90과 NP12 계면활성제 혼합물을 사용하여 제조한 에멀젼 연료는 벙커 C 오일에 비하여 미세먼지, $NO_2$, CO, $CO_2$$SO_2$ 등의 연소배기 가스 중의 대기 오염물 방출을 감소시키는데 효과적이며, 특히 계면활성제 조성 OIMS90/NP12 = 4 : 6, 계면활성제 농도 500 ppm, 수분 함량 10%을 사용하여 $80^{\circ}C$에서 제조한 에멀젼 연료가 배기가스 오염물 저감 효과가 가장 큰 것을 확인하였다. 또한 보일러 효율 측정 시험 결과, 에멀젼 연료가 벙커 C 오일과 비교하여 우수한 디젤 엔진 에너지 효율을 나타내었다.

In this study, water in oil (W/O) emulsion fuel was prepared with surfactant mixture of OIMS90 and NP12 by varying ratio of water to bunker-C oil, surfactant concentration and composition, emulsification time, stirring intensity, temperature and mixing time. Diesel engine performance and exhaust emissions were measured and analyzed with prepared emulsified fuel and compared with those measured using bunker Coil. The results indicated that bunker C emulsion fuel stabilized by surfactant mixture of OIMS90 and NP12 is efficient in reducing emissions of particulate matter, $NO_2$, CO, $CO_2$ and $SO_2$. The biggest reduction in exhaust emission was achieved by using emulsion fuel prepared by OIMS90/NP12 = 4 : 6, 500 ppm of total surfactant concentration and 10% water content at $80^{\circ}C$. Boiler efficiency test measured with emulsion fuel showed excellent energy efficiency compared with bunker C oil.

키워드

참고문헌

  1. C. Y. Lin and L. W. Chen, Engine performance and emission characteristics of three-phase diesel emulsions prepared by an ultrasonic emulsification method, Fuel, 85, 593-600 (2006). https://doi.org/10.1016/j.fuel.2005.09.007
  2. C. Y. Lin and L. W. Chen, Emulsification characteristics of threeand two-phase emulsions prepared by the ultrasonic emulsification method, Fuel Process. Technol., 87, 309-317 (2006). https://doi.org/10.1016/j.fuproc.2005.08.014
  3. J. A. Harbach and V. Agosta, Effects of emulsified fuel on combustion in a four-stroke diesel engine, J. Ship Res., 35 356-363 (1991).
  4. C. Y. Lin, C. M. Lin, and C. S. Chen, Emulsification characteristics of marine fuel oils with water, J. Ship Res., 39, 86-94 (1995).
  5. C. Y. Lin, C. M. Lin, and C. S. Chen, An experimental investigation of burning droplets of emulsified marine fuel oils with water, J. Ship Res., 39, 95-101 (1995).
  6. C. Y. Lin and Y. L. Jeng, Influences of charged air humidity and temperature on the performance and emission characteristics of diesel engine, J. Ship Res., 40, 172-177 (1996).
  7. F. A. Al-Amrousi, A. M. Al-Sabagh, and M. M. Osman, Physicochemical characterization of emulsion fuel from fuel oil-water-charcoal and surfactants, Fuel, 75, 1193-1198 (1996). https://doi.org/10.1016/0016-2361(96)00069-5
  8. C. Y. Lin and J. Y. Pan, The effects of sodium sulfate on the emission characteristics of emulsified marine diesel oil-fired furnace, Ocean Eng., 28, 347-360 (2001). https://doi.org/10.1016/S0029-8018(00)00006-8
  9. L. G. Torres and E. R. Zamora, Preparation and power consumption of surfactant-fuel oil-water emulsions using axial, radial, and mixed flow impellers, Fuel, 81, 2289-2302 (2002). https://doi.org/10.1016/S0016-2361(02)00137-0
  10. C. Y. Lin and K H. Wang, The fuel properties of three-phase emulsions as an alternative fuel for diesel engines, Fuel, 82, 1367-1375 (2003). https://doi.org/10.1016/S0016-2361(03)00021-8
  11. C. Y. Lin and L. W. Chen, Diesel engine performance and emission characteristics using three-phase emulsions as fuel, Fuel, 83, 3537-3545 (2004).
  12. G. Chen and D. Tao, An experimental study of stability of oil-water emulsion, Fuel Process. Technol., 86, 499-508 (2005). https://doi.org/10.1016/j.fuproc.2004.03.010
  13. J. Ghojel and D. Honnery, Al-Khaleefi K, Performance, emissions and heat release characteristics of direct injection diesel engine operating on diesel oil emulsion, Appl. Therm. Eng., 26, 2132-2141 (2006). https://doi.org/10.1016/j.applthermaleng.2006.04.014
  14. C. T. Lin and H. A. Lin, Engine performance and emission characteristics of a three-phase emulsion of biodiesel produced by peroxidation, Fuel Process. Technol., 88, 35-41 (2007). https://doi.org/10.1016/j.fuproc.2006.07.008
  15. G. Chen and D. Tao, An experimental study of stability of oil--water emulsion, Fuel Process. Technol., 86, 499-508 (2005). https://doi.org/10.1016/j.fuproc.2004.03.010
  16. M. Nadeem, C. Rangkuti, K. Anuar, M. R. U. Haq, I. B. Tan, and S. S. Shah, Diesel engine performance and emission evaluation using emulsified fuels stabilized by conventional and gemini surfactants, Fuel, 85, 2111-2119 (2006). https://doi.org/10.1016/j.fuel.2006.03.013
  17. A. Lif and K. Holmberg, Water-in-diesel emulsions and related systems, Adv. Colloid Interface Sci., 123-126, 231-239 (2006). https://doi.org/10.1016/j.cis.2006.05.004
  18. C. Y. Lin and L. W. Chen, Comparison of fuel properties and emission characteristics of two- and three-phase emulsions prepared by ultrasonically vibrating and mechanically homogenizing emulsification methods, Fuel, 87, 2154-2161 (2008). https://doi.org/10.1016/j.fuel.2007.12.017
  19. R. Ochoterena, A. Lif, M. Nyden, and S. Andersson, Ingemar Denbratt optical studies of spray development and combustion of water-in-diesel emulsion and microemulsion fuels, Fuel, 89, 122-132 (2010). https://doi.org/10.1016/j.fuel.2009.06.039
  20. A. Maiboom and X. Tauzia, NOx and PM emissions reduction on an automotive HSDI diesel engine with water-in-diesel emulsion and EGR: An experimental study, Fuel, 90, 3179-3192 (2011). https://doi.org/10.1016/j.fuel.2011.06.014
  21. T. Kadota, H. Tanaka, D. Segawa, S. Nakaya, and H. Yamasaki, Microexplosion of an emulsion droplet during Leidenfrost burning, Proc. Combust. Inst., 31, 2125-2131 (2007). https://doi.org/10.1016/j.proci.2006.07.001
  22. T. Kadota and H. Yamasaki, Recent advances in the combustion of water fuel emulsion, Prog. Energy Combust. Sci., 28, 385-404 (2002). https://doi.org/10.1016/S0360-1285(02)00005-9
  23. R. Ocampo-Battera, R. Villasensor, and A. Diego-Martin, An experimental study of the effect of water content on combustion of heavy fuel oil/water emulsion droplets, Combust. Flame., 126, 1845-1855 (2001). https://doi.org/10.1016/S0010-2180(01)00295-4
  24. S. A. Richmond, J. E. Lindstrom, and J. F. Braddock, Effects of chitin on microbial emulsification, mineralization potential, and toxicity of bunker C fuel oil, Mar. Pollut. Bull., 42, 773-779 (2001). https://doi.org/10.1016/S0025-326X(00)00222-8

피인용 문헌

  1. Exhaust Gas Emission Improvements of Water/Bunker C Oil-Emulsified Fuel Applied to Marine Boiler vol.9, pp.5, 2017, https://doi.org/10.3390/jmse9050477