참고문헌
- Zhao, Fuquan, M.-C. Lai, and David L. Harrington. "Automotive spark-ignited direct-injection gasoline engines", Progress in energy and combustion science, Vol. 25, No. 5, 1999, pp. 437-562. https://doi.org/10.1016/S0360-1285(99)00004-0
- Alkidas, Alex C. "Combustion advancements in gasoline engines". Energy Conversion and Management, Vol. 48, No. 11, 2007, pp. 2751-2761. https://doi.org/10.1016/j.enconman.2007.07.027
- Price, Philip, et al. Particulate matter and hydrocarbon emissions measurements: comparing first and second generation DISI with PFI in single cylinder optical engines. SAE Technical Paper, 2006, No. 2006-01- 1263.
- Storey, J., et al. "Ethanol blend effects on direct injection spark-ignition gasoline vehicle particulate matter emissions", SAE International Journal of Fuels and Lubricants Vol. 3, No. 2, 2010, pp. 650-659. https://doi.org/10.4271/2010-01-2129
- Costagliola, M. A., et al. "Combustion efficiency and engine out emissions of a SI engine fueled with alcohol/ gasoline blends", Applied Energy 111, 2013, pp. 1162-1171. https://doi.org/10.1016/j.apenergy.2012.09.042
- Chan, Tak W., et al. "Evaluation of a gasoline particulate filter to reduce particle emissions from a gasoline direct injection vehicle", SAE International Journal of Fuels and Lubricants, Vol. 5, No. 3, 2012, pp. 1277-1290. https://doi.org/10.4271/2012-01-1727
- Harris, Stephen J., and M. Matti Maricq. "Signature size distributions for diesel and gasoline engine exhaust particulate matter", Journal of Aerosol Science, Vol. 32, No. 6 2001, pp. 749-764. https://doi.org/10.1016/S0021-8502(00)00111-7
- Wang, Xiangang, et al. "Experimental and analytical study on biodiesel and diesel spray characteristics under ultra-high injection pressure", International journal of heat and fluid flow 31.4 (2010): 659-666. https://doi.org/10.1016/j.ijheatfluidflow.2010.03.006
- Han, Zhiyu, et al. "Effects of injection timing on airfuel mixing in a direct-injection spark-ignition engine." SAE Technical Paper, 1997. No. 970625.
- Pierpont, D. A. and Rolf D. Reitz. Effects of injection pressure and nozzle geometry on DI diesel emissions and performance. No. 950604. SAE Technical Paper, 1995.
- Iwamoto, Yasuhiko, et al. Development of gasoline direct injection engine. No. 970541. SAE technical paper, 1997.
- IHarada, Jun, et al. Development of direct injection gasoline engine, No. 970540. SAE Technical Paper, 1997.
- IZhao, Fu-Quan, Ming-Chia Lai, and David L. Harrington, A review of mixture preparation and combustion control strategies for spark-ignited direct-injection gasoline engines. No. 970627. SAE Technical Paper, 1997.
- IStephen Turns, An introduction to combustion, McGraw- Hill, 1999.
- IWilliam C. Hinds, Aerosol technology, Wiley-Interscience, 2012.
- IJohn B. Heywood, Internal combustion engine fundamentals, McGraw-Hill, 1988.