한국융합학회논문지 (Journal of the Korea Convergence Society)

  • 제8권3호
  • /
  • Pages.31-40
  • /
  • 2017
  • /
  • 2233-4890(pISSN)
  • /
  • 2713-6353(eISSN)
한국융합학회 (Korea Convergence Society)
권호 표지
DOI QR코드

DOI QR Code

한국 최초 IT융합 전기스케이트보드

The First Korean-Made IT Convergence Electric Skateboard

  • 정성훈 (초당대학교 항공학부 드론학과) ;
  • 연성욱 ((주)유스피리어드)
  • 투고 : 2017.02.08
  • 심사 : 2017.03.20
  • 발행 : 2017.03.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

환경 친화적인 개인 이동수단의 부상은 세계적인 추세이며, 국내최초 IT 융합 전기스케이트보드인 유스보드가 트렌드를 선도하기위해 개발되었다. 유스보드는 블루투스 v4.0 통신을 통해 유스웨어러블컨트롤러 또는 유스앱을 사용하여 원격으로 제어 가능하며, 최고 시속 25 km/h 속도를 낼 수 있고, 최대 운행 시간은 약 1.5 hr이다. 유스보드 데크 앞면에 위치한 LED 디스플레이는 라이더에게 세 가지 상태, 즉 배터리 잔량 SOC, 현재 주행속도, 그리고 제동량을 표시해 준다. 유스보드와 유스웨어러블컨트롤러 간의 실내 EMC 테스트 결과와 실외 실주행 테스트 결과가 분석되었으며, 특히 실주행 테스트로부터 타사 전기스케이트보드 대비 최대 전류를 약 15% 낮춤으로서 모터제어기의 부하 부담을 줄였다. 이러한 분석 결과들은 유스보드가 타사 전기스케이트보드들보다 작고 가볍고 저렴하며 이는 개인 이동수단으로 유용함을 나타낸다.

The rise of eco-friendly personal electric mobility is a worldwide trend and the first Korean-made IT convergence electric skateboard, Youth Board, is developed to lead the trend. Youth Board is remotely controllable using either Youth Wearable Controller or Youth App through Bluetooth v4.0 communication, can speed up to 25 km/hr, and operating time is approximately 1.5 hr. A LED display located in the front side of Youth Board deck shows three different states to a rider for user convenience: remaining battery SOC, current driving speed, and braking amount. Indoor EMC test results between Youth Board and Youth Wearable Controller and outdoor Youth Board driving test results are analyzed. In particular, driving test results show the maximum current output is about 15% lowered compared to the other competitor electric skateboard and it lessens the power burden of the motor ESC. These results show Youth Board's usefulness as a personal mobility in the sense of small, light, and inexpensive aspects.

키워드

참고문헌

  1. https://goo.gl/jMQq0J
  2. T. K. Hwang and L. C. Chu, "Enhancing Accessibility of Mass Transportation in Metropolitan Taipei by Formulating a Portable Personal Electric Vehicle," IASDR 2009 International Design Conference, pp. 2447-2456, 2009.
  3. H. Kang, "A Convergent Study on the Design and Technology for the Production of Turn Signals for Personal Mobility Devices Using Gytoscope Sensors," Journal of Digital Convergence, pp.373-379, 2016.
  4. A. Rowe G. S. Gupta, and S. Demidenko, "Instrumentation and Control of a High Power BLDC Motor for Small Vehicle Applications," IEEE International and Measurement Technology Conference, pp. 1-6, 2012.
  5. M. V. G. Aziz, A. S. Prihatmanto, and H. Hindersah, "Design and Implementation of Architecture, Classifier and Integrator for the Next Generation Urban Transportation U-Board," IEEE International Conference on System Engineering and Technology, pp. 1-6, 2012.
  6. Q. Shan, J. L. Yang, C. S. Chan, G. Zhang, and W. J. Li, "Towards an Electric-Powered Air-Gliding Skateboard," Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 108-113, 2008.
  7. K. Hyvonen, P. Repo, and M. Lammi, "Light Electric Vehicle: Substitution and Future Uses," Transportation Research Procedia, Vol. 19, pp.. 258-268, 2016. https://doi.org/10.1016/j.trpro.2016.12.085
  8. S. A. Huang, C. M. Liaw, and J. Y. Ni, "Interleaving DC/DC Converter-fed Electric Skateboard with Power Factor Corrected Charger," 41st Annual Conference of the IEEE Industrial Electronics Society, pp. 003792-003797, 2015.
  9. https://goo.gl/cBSF1w
  10. https://goo.gl/qoh1yf
  11. https://goo.gl/4ORlsj
  12. https://goo.gl/ukxG9R
  13. S. Lee, J. Kim, J. Lee, and and B. H. Cho, "State-of-Charge and Capacity Estimation of Lithium-Ion Battery Using a New Open-Circuit Voltage Versus State-of-Charge," Journal of Power Sources, Vol. 185, pp. 1367-1373, 2008. https://doi.org/10.1016/j.jpowsour.2008.08.103
  14. B. Jeong, J, Park, and B. Kang, "A Study of the WPT Module Using Inductive Coupling for the Convergence Applications," Journal of Korea Convergence, pp. 57-64, Vol. 6, No. 2, 2015.
  15. G. Chae, "Anti-lost Device Design using Bluetooth4.1," Convergence Society for SMB, Vol. 6, No. 4, pp. 25-30, 2016.
  16. G. Chae, "An Investigation Study of Electromagnetic Compatibility for Power Module," Journal of the Korea Convergence Society, Vol. 7, No. 6, pp. 23-28, 2016. https://doi.org/10.15207/JKCS.2016.7.6.023