Korean Chemical Engineering Research

  • 제55권2호
  • /
  • Pages.190-194
  • /
  • 2017
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지
DOI QR코드

DOI QR Code

MSDS (Material Safety Data Sheet)를 위한 벤질알코올 연소특성치의 측정 및 예측

The Measurement and Prediction of the Combustible Properties of of Benzyl-Alcohol for MSDS (Material Safety Data Sheet)

  • 하동명 (세명대학교 보건안전공학과)
  • Ha, Dong-Myeong (Department of Occupational Health and Safety Engineering, Semyung University)
  • 투고 : 2016.11.09
  • 심사 : 2016.12.27
  • 발행 : 2017.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

사업장에서 화재 및 폭발을 예방하기 위해서는 연소특성치로 인화점, 폭발한계, 최소자연발화온도 등을 들 수 있다. 화학공정의 안전을 위해서 취급 물질의 정확한 물질보건안전자료(MSDS)의 연소특성치 사용은 매우 중요하다. 화학산업에서 다양하게 사용되고 있는 벤질알코올의 안전한 취급을 위해서 인화점과 최소자연발화온도를 측정하였다. 벤질알코올의 폭발하한계는 실험에서 얻어진 하부인화점을 이용하여 계산하였다. 벤질알코올의 Setaflash 밀폐식은 $90^{\circ}C$, Pensky-Martens 밀폐식에서는 $93^{\circ}C$ 그리고 Tag 개방식에서는 $97^{\circ}C$, Cleveland 개방식에서는 $100^{\circ}C$로 측정되었다. ASTM E659 장치에 의한 측정된 벤질알코올의 최소자연발화온도는 $408^{\circ}C$로 측정되었다. Setaflash 밀폐식에 의해 측정된 벤질알코올의 하부인화점 $90^{\circ}C$의 폭발하한계는 1.17 vol%로 계산되었다. 본 연구에서는 Setaflash 밀폐식에 의해 측정된 벤질알코올의 하부인화점을 이용하여 폭발하한계의 예측이 가능하였다.

The combustion properties for the prevention of the fire and explosion in the work place are flash point, explosion limit, autoignition temperature (AIT) etc.. The using of the corrective combustion properties of the MSDS (Material Safety Data Sheet) of the handling substance for the chemical process safety is very important. For the safe handling of benzyl alcohol which is widely used in the chemical industry, the flash point and the AIT were measured. And, the lower explosion limit (LEL) of benzyl alcohol was calculated by using the lower flash point which obtained in the experiment. The flash points of benzyl alcohol by using the Setaflash and Pensky-Martens closed-cup testers measured $90^{\circ}C$ and $93^{\circ}C$, respectively. The flash points of benzyl alcohol by using the Tag and Cleveland open cup testers are measured $97^{\circ}C$ and $100^{\circ}C$. The experimental AIT of benzyl alcohol by ASTM 659E tester was measured as $408^{\circ}C$. The LEL of benzyl alcohol measured by Setaflash closed-cup apparatus was calculated as 1.17 vol% at $90^{\circ}C$. In this study, it was to possible predict the LEL by using the lower flash point of benzyl alcohol which measured by Setaflash closed-cup tester.

키워드

참고문헌

  1. Lees, F. P., Loss Prevention in the Process Industries, Vol. 2, 2nd ed., Butterworth-Heinemann(1996).
  2. Ha, D. M., "A Study on the Appropriateness of the Combustible Properties of MSDS for o-Cresol," J. of the Korean Society of Safety, 30(2), 21-26(2015). https://doi.org/10.14346/JKOSOS.2015.30.2.21
  3. Drysdale, D., An Introduction to Fire Dynamics, 2nd ed., Jone Wiley & Sons(1998).
  4. Ha, D. M., "The Study on Measurement and Prediction of the Combustible Properties for Aniline," J. of the Korean Institute of Gas, 18(4), 44-50(2014). https://doi.org/10.7842/KIGAS.2014.18.4.44
  5. Lide, D. R., Handbook Chemistry and Physics, 76th ed., CRC Press(1996).
  6. Perry, R. H. and Green, D. W., Perry's Chemical Engineer's Handbook, 7th ed., McGraw-Hill(1997).
  7. Lewis, R. J., SAX's Dangerous Properties of Industrial Materials, 11th ed., John Wiley & Son, Inc.(2004).
  8. KOSHA, http://msds.kosha.or.kr/kcic/msdsdetail.do.
  9. NFPA, Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids, NFPA 325M, National Fire Protection Association( 1991).
  10. Lenga, R. E and Votoupal, K. L., The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III, Sigma Chemical Company and Aldrich Chemical Company Inc.(1993).
  11. Babrauskas, V. and I. Handbook, Fire Science Publishers, Society of Fire Protection Engineers(2003).
  12. Dean, J. A., Lange's Handbook of Chemistry, 14th ed. McGraw-Hill(1992).
  13. Stephenson, S. M., Flash Points of Organic and Organometallic Compounds, Elsevier(1987).
  14. Hilado, C. J. and Clark, S. W., "Autoignition Temperature of Organic Chemicals," Chemical Engineering, 4, 75-80(1972).
  15. Scott, G. S. Jones, G. W. and Scott, F. E., "Determination of Ignition Temperature of Combustible Liquids and Gases," Analytical Chemistry, 20(3), 238-241(1948). https://doi.org/10.1021/ac60015a015
  16. Ha, D. M., "The Measurement and Prediction of the Combustible Properties of Propionic Anhydride," J. of the Korean Institute of Gas, 20(3), 66-72(2016). https://doi.org/10.7842/KIGAS.2016.20.3.66
  17. Ha, D. M., "The Measurement and Prediction of Combustible of Dimethylacetamide (DMAc)," Korean Chem. Eng. Res., 53(5), 553-556(2015). https://doi.org/10.9713/kcer.2015.53.5.553
  18. Gmehing, J., Onken U. and Arlt, W., Vapor-Liquid Equilibrium Data Collection, Vol. 1, Part1-Part7, DECHEMA(1980).
  19. Cho, S. J., Shin, J. S., Choi, S. H., Lee, E. S. and Park, S. J., "Optimization Study for Pressure Swing Distillation Process for the Mixture of Isobutyl-Acetate and Isobutyl-Alcohol System," Korean Chem. Eng. Res., 52(3), 307-313(2014). https://doi.org/10.9713/kcer.2014.52.3.307
  20. Semenov, N. N., Some Problems in Chemical Kinetics and Reactivity, Vol. 2, Princeton University Press, Princeton, N.J.(1959).