참고문헌
- Han, D. S., Kim, S. H., Do, M. S., and Hwang, S. W., “Introduction of WIM System and Reform Measure of Korea WIM Specification,” Journal of the Korean Society of Civil Engineers, Vol. 56, No. 1, pp. 58-68, 2008.
- Gil, H. B. and Kang, S. G., “Characteristics of Heavy Vehicles Using Expressway Networks Based on Weigh-in-motion Data,” Journal of the Korean Society of Civil Engineers, Vol. 33, No. 5, pp. 1731-1740, 2013. https://doi.org/10.12652/Ksce.2013.33.5.1731
- Karim, M. R., Ibrahim, N. I., Saifizul, A. A., and Yamanaka, H., “Effectiveness of Vehicle Weight Enforcement in a Developing Country using Weigh-in-Motion Sorting System Considering Vehicle By-Pass and Enforcement Capability,” International Association of Traffic and Safety Sciences, Vol. 37, No. 2, pp. 124-129, 2014.
- Lee, D. S. and Oh, J. S., “Development of Truck Axle Load Distribution Model Using WIM Data,” Journal of the Korean Society of Civil Engineers, Vol. 26, No. 5, pp. 821-829, 2006.
- Jo, B. W., Yoon, K. W., Park, J. H., and Choi, J. S., “A Study for Smart Overload Vehicle Regulation System,” The Journal of the Computational Structural Engineering, Vol. 24, No. 4, pp. 399-404, 2011.
- Han, L. D., Ko, S. S., Gu, Z., and Jeong, M. K., “Adaptive Weigh-in-Motion Algorithms for Truck Weight Enforcement,” Transportation Research Part C: Emerging Technologies, Vol. 24, No. 8, pp. 256-269, 2012. https://doi.org/10.1016/j.trc.2012.01.010
- Hernandez, V. S., Tok, A., and Ritchie, S. G., “Integration of Weigh-in-Motion (WIM) and Inductive Signature Data for Truck Body Classification,” Transportation Research Part C: Emerging Technologies, Vol. 68, No. 7, pp. 1-21, 2016. https://doi.org/10.1016/j.trc.2016.03.003
- Faruk, A. N., Liu, W., Lee, S. I., Naik, B., Chen, D. H., et al., “Traffic Volume and Load Data Measurement Using a Portable Weigh-in-Motion System: A Case Study,” International Journal of Pavement Research and Technology, Vol. 9, No. 3, pp. 202-213, 2016. https://doi.org/10.1016/j.ijprt.2016.05.004
- Jo, B. W., Yoon, K. W., Park, J. H., and Kim, H., “A Basic Study on Vehicle Load Analyzing System for Embedded Road,” Journal of the Korean Society of Civil Engineers, Vol. 31, No. 1, pp. 127-132, 2011.
- Kwon, S. M. and Suh, Y. C., “Development and Application of the High Speed Weigh-in-Motion for Overweight Enforcement,” Journal of the Korean Society of Road Engineers, Vol. 11, No. 4, pp. 69-78, 2009.
- Lee, D. S. and Oh, J. S., “Development of Truck Axle Load Estimation Model Using Weigh-in-Motion Data,” Journal of the Korean Society of Civil Engineers, Vol. 31, No. 4, pp. 511-518, 2011.
- Park, J. U., Kim, Y. B., Chung, K. H., and Ahn, K. S., “A Research for Improvement of WIM System by Abnormal Driving Patterns Analysis,” Journal of Internet Computing and Services, Vol. 11, No. 4, pp. 59-72, 2010.
- Jo, H. H., Lee, S. K., Jung, C. S., and Kim, B. M., “A Non-Steady State FE Analysis of Al Tubes Hot Extrusion by a Porthole Die,” Journal of Materials Processing Technology, Vol. 173, No. 2, pp. 223-231, 2006. https://doi.org/10.1016/j.jmatprotec.2005.03.039
- Lee, J. M., Kim, B. M., Kang, C. G., and Jo, H. H., “Development of Direct Extrusion Process on Al1050 Condenser Tube by Using Porthole Die,” J. Korean Soc. Precis. Eng., Vol. 21, No. 7, pp. 53-61, 2004.
- Zhang, Z. H., Hou, W. R., Huang, D. N., and Xie, J. X., "Mesh Reconstruction Technology of Welding Process in 3D FEM Simulation of Porthole Extrusion and Its Application," Procedia Engineering, Vol. 36, pp. 253-260, 2012. https://doi.org/10.1016/j.proeng.2012.03.038
- Joe, Y. J., Lee, S. K., Oh, K. H., Park, S. W., Lee, W. S., et al., “Development of Porthole Die on Aluminum Extrusion for the Automobile Control Arm,” J. Korean Soc. Precis. Eng., Vol. 24, No. 4, pp. 102-108, 2007.
- Liu, G., Zhou, J., and Duszczyk, J., “FE Analysis of Metal Flow and Weld Seam Formation in a Porthole Die During the Extrusion of a Magnesium Alloy into a Square Tube and the Effect of Ram Speed on Weld Strength,” Journal of Materials Processing Technology, Vol. 200, No. 1, pp. 185-198, 2008. https://doi.org/10.1016/j.jmatprotec.2007.09.032
- Bae, J. H., Lee, J. M., and Kim, B. M., “Extrusion Process Analysis for Al Condenser Tube with Multi Hole,” Transactions of Materials Processing, Vol. 13, No. 8, pp. 723-730, 2004. https://doi.org/10.5228/KSPP.2004.13.8.723