Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Cutting Condition of Rough Cutting Using Trochoidal Motion

Trochoidal 방식을 이용한 황삭가공의 최적조건

  • Bong, Ha Yoon (Department of Mechatronics Engineering, Graduate School of Korea University of Technology and Education) ;
  • Kim, Moon Ki (School of Mechatronics Engineering, Korea University of Technology and Education)
  • Received : 2016.09.25
  • Accepted : 2016.11.30
  • Published : 2017.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

In modern industry, the machining process is very important for manufacturing various products. More than 80% of machining processes apply rough cutting. The target of this study is to establish the optimal condition of rough cutting using trochoidal motion for improving productivity. For research, the range of cutting conditions is defined by trochoidal motion. The cutting time and tolerance are measured and evaluated according to the cutting conditions of machining. Experimental data are utilized for comparing trochoidal motion and contouring. It is found that the cutting time of trochoidal motion is two times less than that of contouring with optimal cutting conditions. To conclude, trochoidal motion for rough cutting under appropriate cutting conditions improves productivity and shortens processing time significantly.

Keywords

References

  1. Choi, J. G., Kim, H. S., Kim, S. C., 2004, A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes, Journal of the KSMTE, 13:3 8-15.
  2. Tsai, M. D., Takata, S., Inui, M., Kimura, F., Sata, T., 1991, Operation Planning Based on Cutting Process Models, Annals of the CIRP, 40:1 95-98. https://doi.org/10.1016/S0007-8506(07)61942-8
  3. Tlusty, J., Smith, S., Zamudio, C., 1991, New NC Routines for Quality in Milling, Annals of the CIRP, 39:1 517-521.
  4. Lee, H. S., Lee, C.S ., Kim, J. M., Heo, E. Y., 2013, A Study of Feedrate Optimization for Tolerance Error of NC Machining, Journal of the KSMTE, 22:5 852-858.
  5. Kang, I. S., Lee, S. Y., Choi, H. J., Park, C. W., 2016, Machining Optimization Simulation Based on Cutting Force and Its Experimental Validation, Journal of the KSPE Spring Conference, 16-16.
  6. Kang, J. H., Seo, S. H., Lee, J. J., 1995, Rough Cut Tool Path Planning in Fewer-axis CNC Machining, Journal of the KSPE Autumn Conference, 193-198.
  7. Lee, S. Y., Lee, W. H., Kim, S.Y., Kim, S. K., Jeon, E. C., 2010, A Study on the Optimization of Machining Condition Considered Cutting Forces, Journal of the KSME Spring Conference, 216-220.
  8. Kim, K. M., Lee, H. K., Yang, K. E., 1995, An Algorithm of Efficient Rough Cutting Path for Pocket, Journal of the KSPE Spring Conference, 143-148.
  9. Kim, H. C., 2008, An Optimized Direction Parallel Tool Path Generation for Rough Machining, Transactions of the KSME- A, 32:9 761-769. https://doi.org/10.3795/KSME-A.2008.32.9.761
  10. Boothroyd G., Knight, W.A., 1989, Fundamentals of Machining and Machine Tools, DongMyeong Sa, Korea.
  11. LMT TOOLS, n.d., viewed 13 September 2016, The Shortest Path is ... A Curve, .