Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Thermal Deformation Simulation of Boron Steel Square Sheet in Fluid Cooling Process

사각판재 보론강을 사용한 유체냉각공정에서의 열변형 해석

  • Received : 2016.07.06
  • Accepted : 2016.12.29
  • Published : 2017.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Fluid cooling is one of the manufacturing processes used to control mechanical properties, and is recently used for hot stamping of automobile parts. The formed part at room temperature is heated and then cooled rapidly using various fluids in order to obtain better mechanical properties. The formed part may undergo excessive thermal deformation during rapid cooling. In order to predict the thermal deformation during fluid cooling, a coupled simulation of different fields is needed. In this study, cooling simulation of boron steel square sheet was performed. Material properties for the simulation were calculated from JMatPro, and three convection heat transfer coefficients such as water, oil and air were obtained from the experiments. It was found that the thermal deformation increased when the difference of cooling rate of sheet face increased, and the thermal deformation increased when the thickness of sheet decreased.

Keywords

References

  1. M. S. Chae, G. D. Lee, Y. S. Suh, K. H. Lee, Y. S. Kim, 2009, Mechanical and Forming Characteristics of High-strength Boron-alloyed Steel with Hot Forming, Trans. Mater. Process., Vol. 18, No. 3, pp. 236-244. https://doi.org/10.5228/KSPP.2009.18.3.236
  2. H. Karbasian, A. E. Tekkaya, 2010, A Review on Hot Stamping, J. Mater. Process. Technol., Vol. 210, No. 15, pp. 2103-2118. https://doi.org/10.1016/j.jmatprotec.2010.07.019
  3. M. G. Lee, S. J. Kim, H. N. Han, W. C. Jeong, 2009, Application of Hot Press Forming Process to Manufacture an Automotive Part and Its Finite Analysis Considering Phase Transformation Plasticity, Int. J. Mech. Sci., Vol. 51, No. 11, pp. 888-898. https://doi.org/10.1016/j.ijmecsci.2009.09.030
  4. A. D. da Silva, T. A. Pedrosa, J. L. Gonzalez-Mendez, X. Jiang, P. R. Cetlin, T. Altan, 2012, Distortion in Quenching an AISI4140 C-ring-Predictions and Experiments, Mater. Des., Vol. 42, pp. 55-61. https://doi.org/10.1016/j.matdes.2012.05.031
  5. J. K. Park, Y. S. Kim, O. S. Seo, M. G. Lee, H. Y. Kim, 2013, Improved Hot-stamping Analysis of Tubular Boron Steel with Direct Measurement of Heat Convection Coefficient, Int. J. Auto. Technol., Vol. 14, No. 5, pp. 717-722. https://doi.org/10.1007/s12239-013-0078-z
  6. J. H. Son, Y. J. Yum, W. H. Kim, J. B. Hwang, S. U. Kim, S. J. Yoo, H. W. Lee, 2008, Development of High Strength Center-pillar by High Frequency Induction Heating, Trans. Korean Soc. Mech. Eng. A, Vol. 32, No. 6, pp. 533-539. https://doi.org/10.3795/KSME-A.2008.32.6.533
  7. C. H. Suh, T. H. Kwon, K. P. Kang, H. Y. Choi, Y. S. Kim, Y. S. Kim, 2014, Thermo-mechanical Simulation of Boron Steel Cylinder during Heating and Rapid Cooling, Trans. Mater. Process., Vol. 23, No. 8, pp. 475-481. https://doi.org/10.5228/KSTP.2014.23.8.475
  8. S. Y. Lee, K. Lee, Y. H. Lim, W. C. Jeong, 2013, Study on Heat Transfer Characteristic in Hot Press Forming Process, Trans. Mater. Process., Vol. 22. No. 2, pp. 101-107. https://doi.org/10.5228/KSTP.2013.22.2.101
  9. K. P. Kang, K. H. Lee, Y. S. Kim, M. W. Ji, Y. S. Suh, 2008, Prediction of Phase Transformation of Boron Steel Sheet during Hot Press Forming using Material Properties Modeler and DEFORM-HT, Trans. Mater. Process., Vol. 17, No. 4. pp. 249-256. https://doi.org/10.5228/KSPP.2008.17.4.249