DOI QR코드

DOI QR Code

A simplified normalized cumulative hysteretic energy spectrum

  • Sun, Guohua (School of Civil Engineering, Suzhou University of Science and Technology) ;
  • Gu, Qiang (School of Civil Engineering, Suzhou University of Science and Technology) ;
  • Fang, Youzhen (School of Civil Engineering, Suzhou University of Science and Technology)
  • 투고 : 2016.06.17
  • 심사 : 2016.12.25
  • 발행 : 2017.02.25

초록

For energy-based seismic design, a simplified normalized cumulative hysteretic energy spectrum proposed for obtaining hysteretic energy as energy demand is the main objective in this paper. The dimensionless parameter, ${\beta}_{Eh}$, is presented to express hysteretic energy indirectly. The ${\beta}_{Eh}$ spectrum is constructed directly through subtracting the hysteretic energy of single degree-of-freedom (SDOF) system energy equation. The simplified ${\beta}_{Eh}$ spectral formulation as well as pseudo-acceleration spectrum of modern seismic provisions is developed based on the regression analysis of the large number of seismic responses of SDOF system subjected to earthquake excitations, which considers the influence of earthquake event, soil type, damping ratio, and ductility factor. The relationship between PGV and PGA is established according to the statistical analysis relied on a total of 422 ground motion records. The combination of ${\beta}_{Eh}$ spectrum and PGV/PGA equation allows determining the cumulative hysteretic energy as a main aseismic design indicator.

키워드

과제정보

연구 과제 주관 기관 : National Science Foundation of China, Natural Science Foundation of JiangSu Province

참고문헌

  1. Akiyama, H. (1985), Earthquake Resistance Limit State Design for Buildings, University of Tokyo Press, Tokyo, Japan.
  2. Akiyama, H. (1988), "Earthquake resistant design based on the energy concept", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, Japan.
  3. Dindar, A.A., Yalcin, C., Yuksel, E., Ozkaynak, H. and Buyukozturk, O. (2015), "Development of earthquake energy demand spectra", Earthq. Spectra, 31(3), 1667-1689. https://doi.org/10.1193/011212EQS010M
  4. Bruneau, M. and Wang, N. (1996), "Normalized energy-based methods to predict the seismic ductile response of SDOF structures", Eng. Struct., 18(1), 13-28. https://doi.org/10.1016/0141-0296(95)00100-3
  5. Chou, C.C. and Uang, C.M. (2000), "Establishing absorbed energy spectra-an attenuation approach", Earthq. Eng. Struct. D., 29(10), 1441-1455. https://doi.org/10.1002/1096-9845(200010)29:10<1441::AID-EQE967>3.0.CO;2-E
  6. Choi, H., Kim, J. and Chung, L. (2006), "Seismic design of buckling-restrained braced frames based on modified energybalance concept", Can. J. Civ. Eng., 33(10), 1251-1260. https://doi.org/10.1139/l06-068
  7. Decanini, L.D. and Mollaioli, F.L. (1998), "Formulation of elastic earthquake input energy spectra", Earthq. Eng. Struct. D., 27(12), 1503-1522. https://doi.org/10.1002/(SICI)1096-9845(199812)27:12<1503::AID-EQE797>3.0.CO;2-A
  8. Decanini, L.D. and Mollaioli, F.L. (2001), "An energy-based methodology for the assessment of seismic demand", Soil. Dyn. Earthq. Eng., 21(2), 113-137. https://doi.org/10.1016/S0267-7261(00)00102-0
  9. Fajfar, P. and Fischinger, M.A. (1990), "Seismic procedure including energy concept", Proceedings of IX ECEE, Moscow, Vol.2, 312-321.
  10. Fajfar, P. and Vidic, T. (1994), "Consistent inelastic design spectra: hysteretic and input energy", Earthq. Eng. Struct. D., 23(5), 523-537. https://doi.org/10.1002/eqe.4290230505
  11. FEMA P-695. (2009), "Quantification of building seismic performance factor", Federal Emergency Management Agency, Washington, DC, USA.
  12. GB50011-2010. (2016), Code for seismic design of buildings, China Architecture and Building Press, Beijing, China.
  13. Goel, R.K. (1997), "Seismic response of asymmetric system: energy-based approach", J. Struct. Eng., ASCE, 123(11), 1444-1453. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1444)
  14. Habibi, A., Chan, R.W.K. and Albermani, F. (2013), "Energybased design method for seismic retrofitting with passive energy dissipation systems", Eng. Struct., 46(1), 77-86. https://doi.org/10.1016/j.engstruct.2012.07.011
  15. Heidari, A. and Gharehbaghi, S. (2015), "Seismic performance improvement of special truss moment frames using damage and energy concepts", Earthq. Eng. Struct. D., 44(7), 1055-1073. https://doi.org/10.1002/eqe.2499
  16. Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference Earthquake Engineering., Berkeley, California, USA.
  17. Kato, B. and Akiyama, H. (1975), "Energy input and damages in structures subjected to severe earthquakes", Trans. Architec. Inst. Japan, 235, 9-18. https://doi.org/10.3130/aijsaxx.235.0_9
  18. Kalkan, E. (2006), "Prediction of seismic demand in building structures", Ph.D. Dissertation, University of California at Davis.
  19. Kharmale, S.B. and Ghosh, S. (2013), "Performance-based plastic design of steel plate shear wall", J. Construct. Steel. Res., 90(5), 85-97. https://doi.org/10.1016/j.jcsr.2013.07.029
  20. Khampanit, A., Leelataviwat, S., Kochanin, J. and Warnitchai, P. (2014), "Energy-based seismic strengthening design of nonductile reinforced concrete frames using buckling-restrained braces", Eng. Struct., 81, 110-122. https://doi.org/10.1016/j.engstruct.2014.09.033
  21. Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energybased seismic design of structures using yield mechanism and target drift", J. Struct. Eng., ASCE, 128(8), 1046-1054. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1046)
  22. Lopez-Almansa, F., Yazgan, A. and Benavent-Climent, A. (2013), "Design energy input spectra for high seismicity regions based on Turkish registers", Bull. Earthq. Eng., 11(4), 885-912. https://doi.org/10.1007/s10518-012-9415-2
  23. Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. D., 30(4), 485-499. https://doi.org/10.1002/eqe.17
  24. Riddell, R. and Garcia, J.E. (2001), "Hysteretic energy spectrum and damage control", Earthq. Eng. Struct. D., 30(12), 1791-1816. https://doi.org/10.1002/eqe.93
  25. Surahman, A. (2007), "Earthquake-resistant structural design through energy demand and capacity", Earthq. Eng. Struct. D., 36(14), 2099-2117. https://doi.org/10.1002/eqe.718
  26. Sahoo, D.R. and Chao, S. (2010), "Performance-based plastic design method for buckling-restrained braced frames", Eng. Struct., 32(9), 2950-2958. https://doi.org/10.1016/j.engstruct.2010.05.014
  27. Teran-Gilmore, A., Sanchez-Badillo, A. and Espinosa-Johnso, M. (2010), "Performance-based seismic design of reinforced concrete ductile buildings subjected to large energy demands", Earthq. Struct., 1(1), 69-91. https://doi.org/10.12989/eas.2010.1.1.069
  28. Uang, C.M. and Bertero, V.V. (1990), "Evaluation of seismic energy in structures", Earthq. Eng. Struct. D., 19(1), 77-90. https://doi.org/10.1002/eqe.4290190108
  29. Zahrah, T. and Hall, W.J. (1982), "Seismic energy absorption in simple structures", Structural Research Series, No. 501, University of Illinois, Urbana, IL.

피인용 문헌

  1. Mathematical Expression of Design Hysteretic Energy Spectra Based on Chinese Soil Type vol.2019, pp.None, 2017, https://doi.org/10.1155/2019/3483516
  2. A new practical equivalent linear model for estimating seismic hysteretic energy demand of bilinear systems vol.70, pp.3, 2017, https://doi.org/10.12989/sem.2019.70.3.289
  3. Derivation of yield force coefficient for RC frames considering energy balance and P-delta effects vol.79, pp.4, 2017, https://doi.org/10.12989/sem.2021.79.4.429