참고문헌
- Amdalh, J., 1983. Energy Absorption in Ship-platform Impacts. The University of Trondheim, Trondheim. Report No. UR-83-34.
- ASTM E8, 2004. Standard Test Methods from Tensile Testing of Metallic Materials. American Society for Testing and Materials.
- Bridgman, P.W., 1952. Studies in Large Plastic Flow and Fracture. McGraw-Hill, New York.
- Choung, J.M., 2007. On the Fracture Criteria of Steels for Marine Structures Subjected to Impact Loadings. University of Ulsan. Ph.D Thesis.
- Ha, Y.S., 2001. A Study on the Prediction of Plate Deformation by Heating of Weaving Path in Thick Plate Bending. Seoul National University. Master Thesis.
- IACS, 2013. Common Structural Rules. Part 1, Chapter 5 Hull Girder Strength, Section 3 Hull Girder Residual Strength. International Association of Classification Societies.
- Jang, C.D., Ko, D.E., Kim, B.I., Park, J.U., 2001. An experimental study of characteristics of plate deformation by heating process. J. Soc. Nav. Archit. Korea 38 (2), 62-70.
- JIS Z 2201, 1998. Test Pieces for Tensile Test for Metallic Materials.
- Kalpakjian, S., Schmid, S.R., 2001. Manufacturing Processes for Engineering Materials. KOEM (Korea Maritime Environment Management Corporation). www.kmprc.or.kr.
- Lee, B.I., Yoo, H.S., Byun, G.G.,Kim, H.G., 2002. Astudy on automation of steel plate forming by heating method. J. Soc. Nav. Archit. Korea 39 (2), 34-44. https://doi.org/10.3744/SNAK.2002.39.2.034
- Lee, J.S., 1996. Plate forming automation system of steel plates by line heating method (II). J. Soc. Nav. Archit. Korea 33 (3), 81-93.
- Lee, J.S., 1997. Plate forming automation system of steel plates by line heating method (III). J. Soc. Nav. Archit. Korea 34 (2), 85-89.
- Lehmann, E., Yu, X., 1998. On ductile rupture criteria for structural tear in case of ship collision and grounding. In: 7th International Symposium on Practical Design of Ships and Mobile Units, pp. 149-156.
- Masubuchi, K., 1980. Analysis of Welded Structure. Pergamon Press, Oxford.
- Minorsky, V.U., 1958. An analysis of ship collisions with reference to protection of nuclear power plants. J. Ship Res. 8.
- Nomoto, T., Ohmori, T., Enosawa, M., Aoyama, K., Saitoh, M., 1990. Developement of simulator for plate bending by line heating. J. Soc. Nav. Archit. Jpn. 168, 527-535.
- Satoh, K., Terasaki, T., 1976. Effect of welding conditions on welding deformations in welded structural materials. J. Jpn. Weld. Soc. 45 (4).
- Shin, J.G., 1992. A two-dimensional simulator for plate forming by line heating. J. Soc. Nav. Archit. Korea 29 (1), 191-200.
- Urban, J., 2003. Crushing and Fracture of Lightweight Structures. Technical University of Denmark.
- Wisniewski, K., Koiakowski, P., 2003. The effect of selected parameters on ship collision results by dynamic FE simulation. Finite Elem. Anal. Des. 39, 985-1006. https://doi.org/10.1016/S0168-874X(02)00143-9
피인용 문헌
- Laser‐assisted bending by magnetic force vol.2017, pp.7, 2017, https://doi.org/10.1049/joe.2017.0145
- Experimental and numerical study on one flexible incremental bending process vol.96, pp.5, 2017, https://doi.org/10.1007/s00170-018-1777-4
- Heat-assisted incremental bending of metal plates with unsymmetrical curvatures vol.114, pp.11, 2017, https://doi.org/10.1007/s00170-021-07067-6
- Stiffener Design to Maintain Line Heating Efficiency during the Lifting Process Considering Phase Transformation vol.15, pp.1, 2017, https://doi.org/10.3390/ma15010119